On Thu, 1 Dec 2005 09:20:18 -0500, "Terry Keeley" tkee(no spam)@(or
mail)rogers.com wrote:

Greetings Terry,
I assume you have contacted Clausing asking them how to mount the
bearings. If not, try, maybe they can help. They helped me a few years
ago with questions about an Atlas lathe. I have spoken with both SKF
and NTN engineers. Both were helpful. But I also had to go through
some younger engineers to finally speak to older ones with more
experience. You need to be able to tell the engineer how the bearings
are mounted. The mount limits the options. The lines converging or
diverging regulate the stiffness of the assembly. Try SKF again and
insist, politely, to speak to someone who really knows.
ERS
I'm restoring my 1963 Clausing 8520 mill ( pictures here if interested
http://gallery.intlwaters.com/thumbnails.php?album=323 )
and in the process am replacing the spindle bearings. I've read through
many posts on the Yahoo Group and have just gotten more confused.
Talked to a few bearing "engineers" (ya right) at SKF and they don't seem to
have solid answers either.

The spindle takes a pair of 7205 angular contact bearings that are held in
place by a locking washer and nut. I was able to find on the MRC site that
the torque on the nut should be 23-50 ft-lb. but can't seem to find answers
to the following:

Should the bearings be mounted "face to face" (where the contact lines of
the bearings converge inward), or "back to back"?

I can order bearings that are ground and sold as a matching set in either "b
to b" or "f to f" that when mounted together and the retaining nut tightened
give a "light preload".

I can also order bearings that are not matched but are for "universal
pairing" that are about half the cost and are made to mount either way.
Some posts on the Yahoo Group mention that to apply a preload to these
bearings a shim is needed between them either on the inner or outer race,
others say none is needed. If the bearings are made to mount either way how
can they be preloaded without the use of a shim? If needed how thick should
it be?

The machine came fitted with standard bearings and no shims so I can't go by
what was there.

Any experts here? Thanks in advance!