In an earlier contribution to this discussion,
Neil wrote:

we have in our bedroom a little room off the side that acts as a walk
in wardrobe. the previous owner had metal brackets which petrude about
12 inches from the wall and on the end have an eyelet for the pole to
go through (they are attached to the wall and as such the length they
petrude allow garments to be hund without touching the wall. As my
girlfriends collection of clothes has grown the whole damn bracket has
ripped off the wall and taking big chunks of what I believe is lime
and horsehair plaster (its pale and has hairs in it!). I am basically
having a nightmare re attaching these things , I.ve drilled new holes
but the plaster cust ripped apart leaving a massive hole (any tips for
drilling successfully into lime and horsehair plaster). i then filled
these hole let the filler dry, re-drilled quite successfully used
those uno wall plugs (grey ones) and size 8 screws about 2 inches
long (much shorter than what previous owner had in by the way but he
seems to have used blue wall plugs which i would assume are a size up
from the brown however I cant find those anywhere). i rehung it
successfully however it just ripped a couple of massive new holes on
the wall.
I've sort of figured out im gonna have to go deeper into the brick and
therefore need some advice should i use a standard bit in the drill
for drilling through the filler then change to a masonary bit with
hammer action on contact with the masonary. then how deep can i go as
this wall is solid and adjoins to next doors property. my idea is to
bury decent size wall plug (or those metal anchor) deep into the
brick and then use a long screw. any advice or recommendations on
type of plug length of screw to hold a about a 5ft pole full of
clothes.

Sorry this is so long but I need some help!!!!!!!!!

Is there a wall at each end of the rail? If so, why not support the rail off
those rather than by cantilever brackets attached to the back wall?
--
Cheers,
Set Square
______
Please reply to newsgroup. Reply address is invalid.