View Single Post
  #15   Report Post  
Posted to rec.crafts.metalworking,sci.engr.joining.welding
Bill Janssen
 
Posts: n/a
Default cost of welding gas?

Ignoramus20878 wrote:

On Wed, 30 Nov 2005 01:17:45 GMT, Bill Janssen wrote:



Is the tank pressure higher that the regulator pressure? If the tank is
100 PSI
and the regulator is set for 20 PSI then 1 cf in the tank will be 5 cf
after the regulator.

When the tank pressure drops the expansion will also drop. So the
calculation is not trivial.



the cubic feet capacity of the tank refers to quantity of uncompressed
gas at atmospheric pressure. I have a 300 c.f. tank, but it does not
occupy 300 ft of space (equivalent to 10 refrigerators). It only
occupies perhaps 5 cf or so.

i


Thanks for the correction. After I posted It accured to me that the
capacity as I stated would require
a large tank.

So I stand corrected (informed).

Bill K7NOM