Hi all

just an update, the corgi registered installers came back around today and
fitted an automatic bypass, the problem seems to be the same but now the
boilers main indicator light flashes on/off as the boiler shuts down. In the
manual it says its due to overheating which i suppose is the hot water
coming straight back from the pump via the bypass. The problems only seem to
happen at night.........which inturn wakes everyone up with the noise of the
water pumping over.
I am using the honeywell cm-zone trvs and controller if anyone has any
experience of setting these up i could do with some advice !

cheers

Daz
"Set Square" wrote in message
...
In an earlier contribution to this discussion,
John Rumm wrote:

Hence when operating you would expect the
content of the tank to be at least worm.


I hope there are not too many worms in his tank! They'd probably be killed
by the *warm* water, anyway! g
--
Cheers,
Set Square
______
Please reply to newsgroup. Reply address is invalid.