"Jim McGill" skrev i en meddelelse
...
Got a request for a food grade gasket that will handle ~250 deg. F and
neither degrade nor get soft when exposed to alcohols like methanol and
ethanol at those temperatures (goes between a window that looks into a
reflux condenser on a still and its brass housing). I figured that
sheets of that high temperature plastic that they use for modern
spatulas that you can use in a fry pan and not melt would be a good
place to start. But after some Google work which either gives me way too
much or no information, I'm not finding what kind of plastic it is so
I'm tossing it to you guys. Any suggestions what the material is called
and where I'd find 1/8" - 1/4" sheet stock?

I dont know about alcohol, but plate heatexchangers made for milk
pasteurisation use nitrile rubber gaskets.. Most of these heatexchangers are
made for upto 150 deg. C working temperature.. Nitrile rubber is available
as sheets if you find the proper supplier.. Look for companies that sells
food grade conveyor belts

I have a couple of 4 mm thick, 450mm wide rolls of this stuff, but since I
live in Denmark it may be problematic getting it to you :-)..

The supplier should know if it will work with alcohol or not... If they cant
tell you, maybe someone at http://www.alfalaval.com will..

/peter