I would not try to create the cavity for the mortise lock with a
router. If you are going to attempt it without the proper
(expensive) tool, you can do it the old fashioned way. Drill
multiple holes to the proper depth with an auger or a paddle bit.
Use an appropriate and sharp chisel to remove the webs to create
the mortise. The router with template would be a good method to
establish the case rim and scalp plate mortise.

The proper tool is he
http://www.porter-cable.com/index.asp?e=547&p=2846

(top posted for your convenience)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)




wrote in message
oups.com...
hi
is there a router and jig to mortice for door locks (like the
basta 2
lever locks)
or do i need a morticing machine?