On Tue, 15 Nov 2005 15:06:03 GMT, with neither quill nor qualm,
"William Wixon" quickly quoth:

i was wondering if you guys put grease on the (new) bolt(s) when you
reassemble it so that it can't happen again.
when i reassemble stuff with steel bolts into aluminum castings i put grease
on the bolts but i'm wondering if that's a bad thing to do. so far as i

Yes, it is. Grease can either allow them to come loose or it can
evaporate and you end up with stuck bolts anyway.

Use an anti-seize compound for aluminum instead.

-----
= The wealth of reality, cannot be seen from your locality. =
http://www.diversify.com Comprehensive Website Development