The diagnostic procedures on the Thomson Service Literature Disks is quite
helpful in troubleshooting these sets. Next step is the Thomson Technicial
Assist call in service numbers which you already have taken advantage of.
BTW are the colour wheels starting up on either of the items? You should be
able to hear then spin up when the item is powering on.
"Skype_man" wrote in message
...
50" RCA DLP..I posted a couple of times, but really need
help. Two units, plug in, no blue led indicating "ready to go",
press power the two cooling fans start to spin, & stop right
away, no lamp start, lamp is fine tested in a working DLP, &
+390 volts dc into the ballast. I get 65 volts AC at the lamp...
I know there should be high voltage there, but there's not.
Then led displays a code of 10, then 1, the other unit diplays
6, then 3. One RCA Tech says the lamps bad, the other says
it's the $ 1,800.00 light engine. I really don't know what it is.
I haven't been able to really figure out what's going on, &
don't want to spend $3,600.00, just on a guess. Can anyone
shed some light? E-Mail me, if you can @
I can't get newsgroups at work, & I want to try to figure out
what's wrong with these two units Saturday. Thanks a lot. Sky.