Ignoramus1740 wrote:
I have this 10 hp phase converter:
http://igor.chudov.com/projects/Phase-Converter/
It works fine, but I now need a bigger one, for my welder.
I have a 7.5 HP motor that I want to use as the second idler. I would
start it using three phase from the first motor. Startnig the second
one would also activate balancing caps. I am pretty sure that it will
work.
I have this case from a Ferrups UPS:
http://igor.chudov.com/tmp/ferrups-meat-smoker/
I want to mount both motors inside it and use the remaining space to
house all electricals. Again, it should work.
Here's the question. I want this thing to be on casters. It will be
perhaps 300-350 lbs in weight with the motors.
Is it better to bolt the casters to the bottom, or to just weld them
on. That's my question.
i
Bolt.
Not every caster is perfect and I've seen too many that fail for one
reason or another. Would be far less of a headache if the 1 in 500 that
dies could be replaced with bolts.
Koz