In article , larry g says...

It must be nice to have such an area to work in that a hard and fast rule
of no extension cords works.

Well it didn't start out that way.

:^)

Basically whenever I found I was working in one spot a great
deal of the time, that's where I put outlets in. If they
were in the middle of the shop, they get installed up in
the overhead - which I can do because the ceiling is quite
low.

For shops with higher ceilings, drop cords work very well
and can be tied up out of the way when not in use.

Jim


--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================