Hi all,

Have a Epilog Laser Engraver for Sale. (Email me for Pictures)

Was orginally purchase as a 45Watt system, has been test and is
outputing over 50Watts! only has about 80hours of use.

I also have a brand new Rotary that comes with the Laser, never been
used! and a slightly used air compressor too.

Epilog Legend 24TT Technical Specifications
Max Engraving Area 24" x 12" (609 x 305 mm)
Max Material Thickness 6" (152 mm)
Max Engraving Speed 80 inches per second

Table Size 27.25" x 13.25" (692 x 335 mm)

Laser Control Display Panel 4" x 3" LCD displays job graphic, stored
file names, speed, power, run time and more. Drop-down menus provide
user control of all laser settings, calibration and special features.

Intelligent Memory Buffer - Store unlimited files up to 32 MB. Rolling
buffer allows files of any size (32 MB and larger) to be engraved.

Operating Modes - Optimized raster engraving, vector cutting, or
combined raster/vector mode.

Motion Control - High-speed, continuous-loop, DC servo motors using
linear encoding technology for precise positioning.

Laser Source - State-of-the-art, digitally controlled, air-cooled laser
tubes are fully modular, permanently aligned and field
replaceable/upgradeable.

Bearings - Ground and polished steel NeverWear™ bearing system.
Belts - Advanced B-style Kevlar precision drive belts.
Resolution - User controlled choice of 150, 200, 300, 400, 600, or 1200
dpi.
Speed/Power Control - Computer or machine controlled speed and power in
1% increments to 100%.
Vector color mapping links speed and power to any RGB color.

Print Interface - 10 Base T Ethernet or Parallel connection. Compatible
with Windows XP/2000.

Standard Features - Air Assist (pump optional), Auto Focus, Red Dot
Pointer, 2" focus lens, relocatable home, flash upgrade technology.

Size/Weight - 32" wide x 24.5" deep x 15.75" high (813 x 622 x 400 mm)
100 lbs (45.5 kg)
Electrical Requirements - Auto-switching power supply accommodates 110
to 240 volt, 50 or 60 Hz, single phase, 15 amp AC.

Ventilation - External exhaust to the outside required. Output diameter
is 4" (101 mm)
Safety - CDRH Class IIIa
Lens - No optional lens sizes available.

William,
Two questions:
How much are you asking and where is it located?
Thanks,
David Wade

wrote:
Hi all,

Have a Epilog Laser Engraver for Sale. (Email me for Pictures)

Was orginally purchase as a 45Watt system, has been test and is
outputing over 50Watts! only has about 80hours of use.

I also have a brand new Rotary that comes with the Laser, never been
used! and a slightly used air compressor too.

Epilog Legend 24TT Technical Specifications
Max Engraving Area 24" x 12" (609 x 305 mm)
Max Material Thickness 6" (152 mm)
Max Engraving Speed 80 inches per second

Table Size 27.25" x 13.25" (692 x 335 mm)

Laser Control Display Panel 4" x 3" LCD displays job graphic, stored
file names, speed, power, run time and more. Drop-down menus provide
user control of all laser settings, calibration and special features.

Intelligent Memory Buffer - Store unlimited files up to 32 MB. Rolling
buffer allows files of any size (32 MB and larger) to be engraved.

Operating Modes - Optimized raster engraving, vector cutting, or
combined raster/vector mode.

Motion Control - High-speed, continuous-loop, DC servo motors using
linear encoding technology for precise positioning.

Laser Source - State-of-the-art, digitally controlled, air-cooled laser
tubes are fully modular, permanently aligned and field
replaceable/upgradeable.

Bearings - Ground and polished steel NeverWear™ bearing system.
Belts - Advanced B-style Kevlar precision drive belts.
Resolution - User controlled choice of 150, 200, 300, 400, 600, or 1200
dpi.
Speed/Power Control - Computer or machine controlled speed and power in
1% increments to 100%.
Vector color mapping links speed and power to any RGB color.

Print Interface - 10 Base T Ethernet or Parallel connection. Compatible
with Windows XP/2000.

Standard Features - Air Assist (pump optional), Auto Focus, Red Dot
Pointer, 2" focus lens, relocatable home, flash upgrade technology.

Size/Weight - 32" wide x 24.5" deep x 15.75" high (813 x 622 x 400 mm)
100 lbs (45.5 kg)
Electrical Requirements - Auto-switching power supply accommodates 110
to 240 volt, 50 or 60 Hz, single phase, 15 amp AC.

Ventilation - External exhaust to the outside required. Output diameter
is 4" (101 mm)
Safety - CDRH Class IIIa
Lens - No optional lens sizes available.

Dave,
1). I'm asking $18,500.00 Cdn

2).I'm located in Quebec, Canada.

Regards, Will

bump

bump