UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 41
Default Repairing "Blown" Double Glazing

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?

Naffer
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 342
Default Repairing "Blown" Double Glazing


"naffer" wrote in message
...
I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?

Naffer

I dont have experience but looked into this myself and the conclusion was,
the fix is short lived and not much cheaper than getting replacement glass
units.
Others will comment with more accurate info.


  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,736
Default Repairing "Blown" Double Glazing

On Wed, 20 Jul 2011 04:46:37 -0700 (PDT), naffer
wrote:

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?


Not of this company. However it is quite simple to replace the actual
glazing with new glass, which I guess is what they do.
--
(\__/) M.
(='.'=) Due to the amount of spam posted via googlegroups and
(")_(") their inaction to the problem. I am blocking some articles
posted from there. If you wish your postings to be seen by
everyone you will need use a different method of posting.

  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,188
Default Repairing "Blown" Double Glazing

On Jul 20, 12:46*pm, naffer wrote:
I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called *Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?

Naffer


The main component is labour unless you are DIYing it.
I suppose it depends on exactly what they do.
Probably change the air in the unit plus new tape.
But there is dessicant in the aluminium spacers, what happens with
that?
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 4,679
Default Repairing "Blown" Double Glazing

On Jul 20, 5:49 pm, harry wrote:
On Jul 20, 12:46 pm, naffer wrote:

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.


Any direct experiences, please?


Naffer


The main component is labour unless you are DIYing it.
I suppose it depends on exactly what they do.
Probably change the air in the unit plus new tape.
But there is dessicant in the aluminium spacers, what happens with
that?


tape?

dessicant remains saturated? i.e. no longer a dessicant? so pointless
short term repair methinks

are they in wooden frames or UPVC or ??

Jim K


  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,018
Default Repairing "Blown" Double Glazing


"Mark" wrote in message
...
On Wed, 20 Jul 2011 04:46:37 -0700 (PDT), naffer
wrote:

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?


Not of this company. However it is quite simple to replace the actual
glazing with new glass, which I guess is what they do.


Yes, all they do is replace the glazing.






  #7   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 613
Default Repairing "Blown" Double Glazing

On 22/07/2011 15:40, Mr Pounder wrote:
wrote in message
...
On Wed, 20 Jul 2011 04:46:37 -0700 (PDT), naffer
wrote:

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?


Not of this company. However it is quite simple to replace the actual
glazing with new glass, which I guess is what they do.


Yes, all they do is replace the glazing.






Looks more like they reckon they can fix existing units.
There was a thread a little while back about this sort of thing and not
a lot of positive comments were forthcoming. I have no personal knowledge.

http://www.crystalclearwindow.co.uk/process/thecure.htm

  #8   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 11,175
Default Repairing "Blown" Double Glazing

In article ,
naffer writes:
I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.

Any direct experiences, please?


I think any glazier will take the unit apart, clean up
the glass (condensation inside eventually leaves dirty
deposits), and fit new dessicant spacers and tape.

You save the cost of new glass, at the expense of cleaning
it. If it's toughened and/or K-glass, that's probably
going to be worth it.

Glazier is required to check that the glass meets current
standards for safety (which might mean you can't reuse
existing glass), but it doesn't need to meet current
standards for efficiency, only those in place when it was
installed.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]
  #9   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 4,679
Default Repairing "Blown" Double Glazing

On Jul 22, 9:37 pm, (Andrew Gabriel)
wrote:
In article ,
naffer writes:

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.


Any direct experiences, please?


I think any glazier will take the unit apart, clean up
the glass (condensation inside eventually leaves dirty
deposits), and fit new dessicant spacers and tape.

You save the cost of new glass, at the expense of cleaning
it. If it's toughened and/or K-glass, that's probably
going to be worth it.

Glazier is required to check that the glass meets current
standards for safety (which might mean you can't reuse
existing glass), but it doesn't need to meet current
standards for efficiency, only those in place when it was
installed.



?? shurely cheaper to just replace the whole shebangg (aka sealed
unit) :- labour costs never mind others?

Jim K
  #10   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 11,175
Default Repairing "Blown" Double Glazing

In article ,
Jim K writes:
On Jul 22, 9:37 pm, (Andrew Gabriel)
wrote:
In article ,
naffer writes:

I was about to get some double glazed panes replaced since they have
developed condensation.
A friend has pointed me at a firm called Crystalclear.
This firm claims to be able to repair such windows at some fraction of
the cost of replacement.


Any direct experiences, please?


I think any glazier will take the unit apart, clean up
the glass (condensation inside eventually leaves dirty
deposits), and fit new dessicant spacers and tape.

You save the cost of new glass, at the expense of cleaning
it. If it's toughened and/or K-glass, that's probably
going to be worth it.

Glazier is required to check that the glass meets current
standards for safety (which might mean you can't reuse
existing glass), but it doesn't need to meet current
standards for efficiency, only those in place when it was
installed.



?? shurely cheaper to just replace the whole shebangg (aka sealed
unit) :- labour costs never mind others?


Like I said, depends on the cost of cleaning, verses cost of
new glass. The labour cost for making it up is same either
way.

Cost of glass goes up and down (mostly up) with the cost of
energy. Any treatments (toughened and/or K-glass) adds on top.
It was certainly cheaper to get my old dining room sealed unit
remade than replaced, and that was when glass was much cheaper
than it is today. (I actually had all the windows replaced
instead, but that was for other reasons.)

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Double glazing - internal "snap-in" removal Tim S UK diy 15 May 28th 09 12:34 AM
How to tell if double glazing has "popped"... Mike Deblis UK diy 19 January 17th 06 04:44 PM
Repairing sealed unit double glazing Ken UK diy 17 June 14th 05 10:26 PM


All times are GMT +1. The time now is 12:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"