UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
John
 
Posts: n/a
Default Securing shower arm/head to wall

I have an interesting situation with a shower kit I`ve just bought. The
shower can be seen he
http://www.hudsonreed.co.uk/loadbuy5...7/sh/sh04.html

The shower valve itself is easy to fit to the wall (has holes for screwing
to wall).
The shower arm and head on the other hand could be a problem as they are
quite heavy (and would be more so with water in them).
The kit comes with a 15mm to 1/2 inch compression elbow. which connects the
1/2 inch shower arm to 15mm copper which would run to the valve (inside a
stud wall).
What I can`t figure out is how to secure the shower arm to the wall. If I
just used the elbow without any other fixing surely the arm would flop
hopelessly towards the floor because of the weight.
I had thought about using a wall plate adaptor (like the type used for
garden taps):
http://www.screwfix.com/app/sfd/cat/...39626&id=17416 and a 1/2 inch
straight compression coupler to join to the shower arm.
This would provide more strength but I still don`t think this would be
enough to hold the shower arm horizontally without gravity taking hold.
How have others tackled this problem? - even the manufacturer can`t help!

John


  #2   Report Post  
John Stumbles
 
Posts: n/a
Default Securing shower arm/head to wall


"John" wrote in message
...
I have an interesting situation with a shower kit I`ve just bought. The
shower can be seen he
http://www.hudsonreed.co.uk/loadbuy5...7/sh/sh04.html

The shower valve itself is easy to fit to the wall (has holes for screwing
to wall).
The shower arm and head on the other hand could be a problem as they are
quite heavy (and would be more so with water in them).
The kit comes with a 15mm to 1/2 inch compression elbow. which connects

the
1/2 inch shower arm to 15mm copper which would run to the valve (inside a
stud wall).
What I can`t figure out is how to secure the shower arm to the wall. If I
just used the elbow without any other fixing surely the arm would flop
hopelessly towards the floor because of the weight.
I had thought about using a wall plate adaptor (like the type used for
garden taps):
http://www.screwfix.com/app/sfd/cat/...39626&id=17416 and a 1/2

inch
straight compression coupler to join to the shower arm.
This would provide more strength but I still don`t think this would be
enough to hold the shower arm horizontally without gravity taking hold.
How have others tackled this problem? - even the manufacturer can`t help!


The last shower of that type I did was through a solid wall with the
plumbing on the other side from the shower cubicle, and I pushed the tube
through the wall and glued it in with lots of gripfill.

If as you say it's to go into a stud wall I'd be inclined to dig out the
wall, bung in a nice thick nogging, drill a 15mm hole in the nogging and
push (and glue) the pipe into that (with compression elbow on the back of it
to connect to the shower valve).


--
John Stumbles
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+
Many hands make light work Too many cooks spoil the broth



  #3   Report Post  
John Stumbles
 
Posts: n/a
Default Securing shower arm/head to wall

"John Stumbles" ] wrote in message
...

"John" wrote in message
...
I have an interesting situation with a shower kit I`ve just bought. The
shower can be seen he
http://www.hudsonreed.co.uk/loadbuy5...7/sh/sh04.html

The shower valve itself is easy to fit to the wall (has holes for

screwing
to wall).
The shower arm and head on the other hand could be a problem as they are
quite heavy (and would be more so with water in them).
The kit comes with a 15mm to 1/2 inch compression elbow. which connects

the
1/2 inch shower arm to 15mm copper which would run to the valve (inside

a
stud wall).
What I can`t figure out is how to secure the shower arm to the wall. If

I
just used the elbow without any other fixing surely the arm would flop
hopelessly towards the floor because of the weight.
I had thought about using a wall plate adaptor (like the type used for
garden taps):
http://www.screwfix.com/app/sfd/cat/...39626&id=17416 and a 1/2

inch
straight compression coupler to join to the shower arm.
This would provide more strength but I still don`t think this would be
enough to hold the shower arm horizontally without gravity taking hold.
How have others tackled this problem? - even the manufacturer can`t

help!

The last shower of that type I did was through a solid wall with the
plumbing on the other side from the shower cubicle, and I pushed the tube
through the wall and glued it in with lots of gripfill.

If as you say it's to go into a stud wall I'd be inclined to dig out the
wall, bung in a nice thick nogging, drill a 15mm hole in the nogging and
push (and glue) the pipe into that (with compression elbow on the back of

it
to connect to the shower valve).


.... however, if anyone twists the tube coming out of the wall (easy to do
since the shower head is easy to grab hold of and move sideways) they'd
break any glue joint and loosen the compression joint. (That wasn't a
show-stopper in the install I did as the joint was still accessible). If the
tube is chromed copper I'd solder it into an elbow behind the nogging, which
should mechanically secure it as well as being the correct sort of joint to
use in an inaccessible location.

You might be better scraping the chrome off the copper before soldering.

And you'd probably want to fix the nogging into the wall _after_ doing the
plumbing joints!


--
John Stumbles
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-+
The most dangerous component in a car is the nut that holds the steering
wheel



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
another leaky shower question Witchy UK diy 6 October 9th 03 06:09 PM
Dirty folk: third shower proposed! GB UK diy 8 September 10th 03 08:55 PM
Shower screen grumble... David W.E. Roberts UK diy 0 September 5th 03 06:49 PM
shower drain for tiled shower floor g UK diy 3 September 2nd 03 02:55 AM
strange shaped shower rail NC UK diy 2 July 31st 03 01:33 PM


All times are GMT +1. The time now is 05:21 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"