A DIY & home improvement forum. DIYbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » DIYbanter forum » Do - it - Yourself » Metalworking
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

10 Weight Machine Oil for Mill



 
 
LinkBack Thread Tools Display Modes
  #1  
Old February 12th 05, 06:40 AM
[email protected]
external usenet poster
 
Posts: n/a
Default 10 Weight Machine Oil for Mill

The oil cups on the head of my Jet vertical mill specify 10 weight
machine oil. What type of Mobil product would fit this weight? I tried
putting in Velocite #10 spindle oil and it just seemed to run out. Then
I looked up the spec and it shows that it is an IOSVG 22. This is a
belt change mill.

Thanks, Steve

Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Self-Reproducing Machine Tools Doug Goncz Metalworking 15 June 19th 14 09:43 AM
source for parallel machine files - progress Grant Erwin Metalworking 1 August 11th 04 09:16 PM
Figuring loads / block & tackle theory The Other Harry Home Repair 152 March 20th 04 07:55 PM
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding korak Metalworking 1 January 4th 04 07:25 PM
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding korak Metalworking 1 December 15th 03 05:36 AM


All times are GMT +1. The time now is 04:25 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.SEO by vBSEO ©2010, Crawlability, Inc.
Copyright 2004-2014 DIYbanter.
The comments are property of their posters.