A DIY & home improvement forum. DIYbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » DIYbanter forum » Do - it - Yourself » Metalworking
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

English wheel PLANS FREE !!!!!!!



 
 
LinkBack Thread Tools Display Modes
  #1  
Old December 17th 04, 03:50 AM
Jason
external usenet poster
 
Posts: n/a
Default English wheel PLANS FREE !!!!!!!

I am looking for plans on a English Wheeel....

FREE of course

Anyone out there want to help ?????


Ads
  #2  
Old December 17th 04, 04:56 AM
Richard Ferguson
external usenet poster
 
Posts: n/a
Default

http://www.metalmeet.com

http://www.metalshapers.org

Both sites will have pictures, drawings, discussions, you name it. Not
sure that you will find a complete set of plans that you could simply
follow exactly. Most people seem to take ideas from various people,
look at the material they have available in their shop, and then start
building. I was just watching a discussion of what kind of threaded rod
is best for an adjuster, and how to keep the slack out of the system.

Lots of different designs get built. How big a wheel do you want? 24"
throat? 40 inch throat? The bigger the throat, the harder it is to
make the frame stiff enough to work well. If you use big enough tubing,
you can certainly make the frame as stiff as you want.

Richard



Jason wrote:
I am looking for plans on a English Wheeel....

FREE of course

Anyone out there want to help ?????


  #3  
Old December 18th 04, 01:32 PM
Bob
external usenet poster
 
Posts: n/a
Default

You get what you pay for

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
diy plans T. Woodworking 15 February 7th 04 04:32 AM
FREE plans for a wooden briefcase david syme Woodworking 9 November 23rd 03 09:34 PM
anyone have any free plans for a billiard chair? Steve Woodworking 4 November 20th 03 04:41 PM
FAQ Marlene & John Schwab Woodworking 2 October 23rd 03 12:47 AM


All times are GMT +1. The time now is 01:37 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.SEO by vBSEO ©2010, Crawlability, Inc.
Copyright 2004-2014 DIYbanter.
The comments are property of their posters.