Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Tips on Refinishing Bilco Doors
My Bilco doors are starting to rust. I'd like to strip them down then
prime and paint them. Any good tips on doing this? What type of primer and paint are best for this to avoid rusting again. Regards |
#2
Posted to alt.home.repair
|
|||
|
|||
Tips on Refinishing Bilco Doors
Get a wire wheel for your drill and knock loose any peeling paint and
rust and prime with rustoleum finish with your choice of paint. You could use chemical strippers and naval jelly but why agravate yourself, they will start to rust again in two years no matter what you do. |
#3
Posted to alt.home.repair
|
|||
|
|||
Tips on Refinishing Bilco Doors
If you like an industrial look, i noticed that you can now get cold
galvinizing spray paint. Basically a zinc spray paint that makes metal look like galvinized nails or fence wire. http://www.alvinproducts.com/Product...S%20AND%20USES You can use it as a primer too but I don't know how it effect the final finish. Other brands available. "RayV" wrote in message oups.com... Get a wire wheel for your drill and knock loose any peeling paint and rust and prime with rustoleum finish with your choice of paint. You could use chemical strippers and naval jelly but why agravate yourself, they will start to rust again in two years no matter what you do. |
#4
Posted to alt.home.repair
|
|||
|
|||
Tips on Refinishing Bilco Doors
Brush-paint over the rust (scrape off any loose stuff, but no need to get it all) with POR-15. You will never see rust again. Car restorers use it all the time. http://www.por15.com/ On 8 May 2006 12:42:14 -0700, wrotF: My Bilco doors are starting to rust. I'd like to strip them down then prime and paint them. Any good tips on doing this? What type of primer and paint are best for this to avoid rusting again. Regards |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
trimming masonite doors questions | Woodworking | |||
Fitting Bi-fold doors - help (long) | UK diy | |||
Source of rolling doors | Home Repair | |||
New Front Door(s) | Home Repair | |||
Odd-sized internal doors solution? | UK diy |