Swingman wrote:
For years I've been using one of those $19.95 aluminum tapering jigs
and
felt like I've cheated death each and every time I use it to cut
tapered
legs. I literally breathe a sigh of relief when that part of a
tapered leg
table project is over and done with ... until the next time.

Faced with cutting 12 walnut tapered legs for some commissioned
tables
yesterday, I quickly fabricated the simple tapering jig mentioned in
FWW's
recent "Power Tools" edition.

Big difference, and a pleasure, and much safer, to use:

http://e-woodshop.net/files/Taperjig1.jpg
http://e-woodshop.net/files/Taperjig2.jpg
http://e-woodshop.net/files/12Legs.JPG

For anyone else who has been procrastinating, this particular
tapering jig
is highly recommended, can be fabricated in well under an hour, is
infinitely adjustable, and beats hell out of my old aluminum wonder,
or any
one-off tapering jig I've used.

(Tip: it is not necessary to spend a great deal of time cutting out a
perfectly circular cam ... I simply used a paint can to draw a
circle,
freehanded it on the bandsaw in a couple of minutes, then used the
stationary belt sander to touch it up.)

--
www.e-woodshop.net
Last update: 4/17/05

I always thought those aluminum things looked dangerous, not much
controlling the wood. I made one similar to yours but I installed 3
pieces of T tracks in the sled that run perpendicular to the miter. Use
the same clamps. Works great lots of flexibility
Joey