Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Porter Cable Omnijig
I'm thinking of getting a dovetail jig after the first of the year.
The PC Omnijig (16 inch) looks good. Any pros and cons from owners would be appreciated. Thanks, Mike |
#2
|
|||
|
|||
I had a big one with all of the attachments. I made a lot of drawers with
the half blind dovetail template. Used the 1/4 inch finger joint a lot. Had the adjustable dovetail set and it worked fine. The biggest problem with all of these jigs on the market is the simpler the jig the easiest to learn. The Omni will do a great job but it takes time to learn. max I'm thinking of getting a dovetail jig after the first of the year. The PC Omnijig (16 inch) looks good. Any pros and cons from owners would be appreciated. Thanks, Mike |
#3
|
|||
|
|||
On Fri, 24 Dec 2004 04:36:51 GMT, max wrote:
I had a big one with all of the attachments. I made a lot of drawers with the half blind dovetail template. Used the 1/4 inch finger joint a lot. Had the adjustable dovetail set and it worked fine. The biggest problem with all of these jigs on the market is the simpler the jig the easiest to learn. The Omni will do a great job but it takes time to learn. max Time to learn is no problem. I'll be retiring in June. Mike |
#4
|
|||
|
|||
"MikeK" wrote in message ... On Fri, 24 Dec 2004 04:36:51 GMT, max wrote: I had a big one with all of the attachments. I made a lot of drawers with the half blind dovetail template. Used the 1/4 inch finger joint a lot. Had the adjustable dovetail set and it worked fine. The biggest problem with all of these jigs on the market is the simpler the jig the easiest to learn. The Omni will do a great job but it takes time to learn. max Time to learn is no problem. I'll be retiring in June. Mike Since that's the case, why not start now to learn to whack 'em out by hand? By the time it might take to master the PC Omnijig you could be teaching the rest of us how to to use Japanese pull saws to cut the little debils -- you'd save a small fortune and you could charge tuition to make up for the SS losses sure to come :-/ -- Enjoy life and *do* well by it -- it might well be the only chance you get :-) Steve, http://www.ApacheTrail.com/ww/ |
#5
|
|||
|
|||
Hi Mike,
You'll love retirement. I retired in September (medical problems) and have made a kitchen table and a jewelry box so far. Nothing but time and stacks of wood. Steve Remove the 'remove' in my address to e:mail me. |
#6
|
|||
|
|||
|
#7
|
|||
|
|||
Mike,
I am almost 68 and am retired and working more than ever before. I have the best "job" on earth...getting tools to review and use. As to Omnijig, it has no greater learning curve thatn any of the others. |
#8
|
|||
|
|||
Hi Mike, You'll love retirement. I retired in September (medical problems) and have made a kitchen table and a jewelry box so far. Nothing but time and stacks of wood. Steve I have to comment on your last sentence.... I am now 61...(just had a birthday last week) and I retired the day I turned 55.... It does NOT take long for those "stacks" of wood to disapear..BELIEVE ME.... I thought I had enouygh to last forever ... dumb me ! Nor does it take much time before you start to notice you do not have any ..... (time that is) Lots of luck.... Bob Griffiths |
#9
|
|||
|
|||
On Fri, 24 Dec 2004 19:40:34 -0500, Bob G.
wrote: I have to comment on your last sentence.... I am now 61...(just had a birthday last week) and I retired the day I turned 55.... Well, if we're bragging, I've been retired a year longer than you and I'm only 58 (although 59 next month). - - LRod Master Woodbutcher and seasoned termite Shamelessly whoring my website since 1999 http://www.woodbutcher.net |
#10
|
|||
|
|||
You have to tell us what you want to use it for! It is well suited for
somethings, and not so good for others. |
#11
|
|||
|
|||
On Fri, 24 Dec 2004 04:42:37 GMT, "toller" wrote:
You have to tell us what you want to use it for! It is well suited for somethings, and not so good for others. Well, I would like to make different kinds of boxes and new kitchen drawers with it to start. What is it not suited well for. Mike |
#12
|
|||
|
|||
"MikeK" wrote in message ... On Fri, 24 Dec 2004 04:42:37 GMT, "toller" wrote: You have to tell us what you want to use it for! It is well suited for somethings, and not so good for others. Well, I would like to make different kinds of boxes and new kitchen drawers with it to start. What is it not suited well for. It would be great for new kitchen drawers. If comes into it's own making a lot of exactly the same standard half blind dovetails; like what your kitchen drawers will need. Though the 16" capacity will be wasted. Maybe a smaller, cheaper, jig will be okay for that also, but none have the reassuring mass of an omnijig. (The 24" weighs 60 pounds; I don't know about the 16".) It is not so good with creative variable stuff. Some of the other, more complicated, jigs do that better. |
#13
|
|||
|
|||
On Fri, 24 Dec 2004 05:42:38 GMT, "toller" wrote:
"MikeK" wrote in message .. . On Fri, 24 Dec 2004 04:42:37 GMT, "toller" wrote: You have to tell us what you want to use it for! It is well suited for somethings, and not so good for others. Well, I would like to make different kinds of boxes and new kitchen drawers with it to start. What is it not suited well for. It would be great for new kitchen drawers. If comes into it's own making a lot of exactly the same standard half blind dovetails; like what your kitchen drawers will need. Though the 16" capacity will be wasted. Maybe a smaller, cheaper, jig will be okay for that also, but none have the reassuring mass of an omnijig. (The 24" weighs 60 pounds; I don't know about the 16".) It is not so good with creative variable stuff. Some of the other, more complicated, jigs do that better. PC has, or will have soon, a new model 4212 12" deluxe Jig. The PC site makes it sound good. I'll wait till I can actually look at the 12" deluxe and the 16" Omnijig (if I can find them at Lowes or HD). Thanks for the feedback. Mike |
#14
|
|||
|
|||
"MikeK" wrote in message ... On Fri, 24 Dec 2004 05:42:38 GMT, "toller" wrote: "MikeK" wrote in message . .. On Fri, 24 Dec 2004 04:42:37 GMT, "toller" wrote: You have to tell us what you want to use it for! It is well suited for somethings, and not so good for others. Well, I would like to make different kinds of boxes and new kitchen drawers with it to start. What is it not suited well for. It would be great for new kitchen drawers. If comes into it's own making a lot of exactly the same standard half blind dovetails; like what your kitchen drawers will need. Though the 16" capacity will be wasted. Maybe a smaller, cheaper, jig will be okay for that also, but none have the reassuring mass of an omnijig. (The 24" weighs 60 pounds; I don't know about the 16".) It is not so good with creative variable stuff. Some of the other, more complicated, jigs do that better. PC has, or will have soon, a new model 4212 12" deluxe Jig. The PC site makes it sound good. I'll wait till I can actually look at the 12" deluxe and the 16" Omnijig (if I can find them at Lowes or HD). Yeh, I read the description. It is sheet steel instead of cast aluminum. Might be as good, or might just be the same as all the cheapies. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Porter Cable Bammer Cordless Nailer - BEWARE | Woodworking | |||
slightly OT NTL/Telewest cable descrambler | UK diy |