WOT: Keyboard to Keyboard Amp
Way off topic but I know someone here will have the answer.
I have a Kurzweil SP76 keyboard and a Peavey KB1 amp. How do I hook these up? The Kurzweil has a Left/Right output for 1/4 TRS cables, and the Peavey has a left and right channel input for 1/4 TRS cables. Do I just run a TRS cable from the left-channel 1, and right-channel 2? I'm obviously way new at this and I don't want to screw anything. I normally play an old-fashioned piano. Thanks for all help. |
WOT: Keyboard to Keyboard Amp
On Thu, 13 May 2021 20:22:37 -0700 (PDT), Michael
wrote: Way off topic but I know someone here will have the answer. I have a Kurzweil SP76 keyboard and a Peavey KB1 amp. How do I hook these up? The Kurzweil has a Left/Right output for 1/4 TRS cables, and the Peavey has a left and right channel input for 1/4 TRS cables. Do I just run a TRS cable from the left-channel 1, and right-channel 2? I'm obviously way new at this and I don't want to screw anything. I normally play an old-fashioned piano. Thanks for all help. The 1/4 inch outputs are "line out" so they plug directly to your "line in" connectors on your Peavy amp. |
WOT: Keyboard to Keyboard Amp
On Thursday, May 13, 2021 at 11:30:40 PM UTC-4, Clare Snyder wrote:
On Thu, 13 May 2021 20:22:37 -0700 (PDT), Michael wrote: Way off topic but I know someone here will have the answer. I have a Kurzweil SP76 keyboard and a Peavey KB1 amp. How do I hook these up? The Kurzweil has a Left/Right output for 1/4 TRS cables, and the Peavey has a left and right channel input for 1/4 TRS cables. Do I just run a TRS cable from the left-channel 1, and right-channel 2? I'm obviously way new at this and I don't want to screw anything. I normally play an old-fashioned piano. Thanks for all help. The 1/4 inch outputs are "line out" so they plug directly to your "line in" connectors on your Peavy amp. While your keyboard is capable of putting out stereo, your amp is mono. Virtually every keyboard will put out a mono signal from its LEFT line output if you don't put a plug in the RIGHT line output. Many are even labeled "Left/Mono". So just get a standard 1/4" to 1/4" "TS" cable - a "guitar" cable - and connect the left line output of your keyboard to one of the inputs of your amp. |
WOT: Keyboard to Keyboard Amp
On Fri, 21 May 2021 20:15:12 -0700 (PDT), Greg Guarino
wrote: On Thursday, May 13, 2021 at 11:30:40 PM UTC-4, Clare Snyder wrote: On Thu, 13 May 2021 20:22:37 -0700 (PDT), Michael wrote: Way off topic but I know someone here will have the answer. I have a Kurzweil SP76 keyboard and a Peavey KB1 amp. How do I hook these up? The Kurzweil has a Left/Right output for 1/4 TRS cables, and the Peavey has a left and right channel input for 1/4 TRS cables. Do I just run a TRS cable from the left-channel 1, and right-channel 2? I'm obviously way new at this and I don't want to screw anything. I normally play an old-fashioned piano. Thanks for all help. The 1/4 inch outputs are "line out" so they plug directly to your "line in" connectors on your Peavy amp. While your keyboard is capable of putting out stereo, your amp is mono. Virtually every keyboard will put out a mono signal from its LEFT line output if you don't put a plug in the RIGHT line output. Many are even labeled "Left/Mono". So just get a standard 1/4" to 1/4" "TS" cable - a "guitar" cable - and connect the left line output of your keyboard to one of the inputs of your amp. Just adding a bit--the manual isn't really clear on the purpose of the multiple channels. They aren't "left" and "right", they are inputs for separate instruments--the idea is that you can plug in a couple of keyboards or a guitar and a bass or whatever and adjust levels and equalization without having to have a separate mixer. |
WOT: Keyboard to Keyboard Amp
On Fri, 21 May 2021 23:43:53 -0400, J. Clarke
wrote: On Fri, 21 May 2021 20:15:12 -0700 (PDT), Greg Guarino wrote: On Thursday, May 13, 2021 at 11:30:40 PM UTC-4, Clare Snyder wrote: On Thu, 13 May 2021 20:22:37 -0700 (PDT), Michael wrote: Way off topic but I know someone here will have the answer. I have a Kurzweil SP76 keyboard and a Peavey KB1 amp. How do I hook these up? The Kurzweil has a Left/Right output for 1/4 TRS cables, and the Peavey has a left and right channel input for 1/4 TRS cables. Do I just run a TRS cable from the left-channel 1, and right-channel 2? I'm obviously way new at this and I don't want to screw anything. I normally play an old-fashioned piano. Thanks for all help. The 1/4 inch outputs are "line out" so they plug directly to your "line in" connectors on your Peavy amp. While your keyboard is capable of putting out stereo, your amp is mono. Virtually every keyboard will put out a mono signal from its LEFT line output if you don't put a plug in the RIGHT line output. Many are even labeled "Left/Mono". So just get a standard 1/4" to 1/4" "TS" cable - a "guitar" cable - and connect the left line output of your keyboard to one of the inputs of your amp. Just adding a bit--the manual isn't really clear on the purpose of the multiple channels. They aren't "left" and "right", they are inputs for separate instruments--the idea is that you can plug in a couple of keyboards or a guitar and a bass or whatever and adjust levels and equalization without having to have a separate mixer. and by centering the control and feeding both channels in there is no chance you will loose anything from one channel or the other of a stereo source. Not generally an issue from a keyboard, but definitely from a stereo recording where one instrument may almost dissapear on one channel and be full on on the other. (and can be an issue if the keyboard does any "sampling" |
WOT: Keyboard to Keyboard Amp
On Saturday, May 22, 2021 at 12:54:15 AM UTC-5, Clare Snyder wrote:
On Fri, 21 May 2021 23:43:53 -0400, J. Clarke wrote: On Fri, 21 May 2021 20:15:12 -0700 (PDT), Greg Guarino wrote: Thanks everyone! This is really very helpful! |
All times are GMT +1. The time now is 07:19 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter