Is it worth fixing Jet miter gauge?
 

I realize this is a really old post, but I just ran across it because the pin fell out of my miter gauge during a move. After reading it and all the replies. I was set to buy a new one because I didn't find replacement pins on any of the parts or Jet website. I went over to Lowes and bought a package of 1/4" roll pins for $.98. (2 pack) drove one in and problem solved. the gauge works perfectly and I don't think I'll ever need the 2nd pin.

--
For full context, visit https://www.homeownershub.com/woodwo...ge-177717-.htm

Is it worth fixing Jet miter gauge?
 

On 3/7/2021 11:01 AM, Jay Irvine wrote:
I realize this is a really old post, but I just ran across it because
the pin fell out of my miter gauge during a move. After reading it and
all the replies. I was set to buy a new one because I didn't find
replacement pins on any of the parts or Jet website. I went over to
Lowes and bought a package of 1/4" roll pins for $.98. (2 pack) drove
one in and problem solved. the gauge works perfectly and I don't think
I'll ever need the 2nd pin.



You will need the second pin just after you forget where the second one
is it.

Is it worth fixing Jet miter gauge?
 

On Sun, 7 Mar 2021 12:21:12 -0600, Leon lcb11211@swbelldotnet wrote:

On 3/7/2021 11:01 AM, Jay Irvine wrote:
I realize this is a really old post, but I just ran across it because
the pin fell out of my miter gauge during a move. After reading it and
all the replies. I was set to buy a new one because I didn't find
replacement pins on any of the parts or Jet website. I went over to
Lowes and bought a package of 1/4" roll pins for $.98. (2 pack) drove
one in and problem solved. the gauge works perfectly and I don't think
I'll ever need the 2nd pin.



You will need the second pin just after you forget where the second one
is it.

Throw it away not. You'll save yourself a lot of grief down the road.
;-)

Is it worth fixing Jet miter gauge?
 

On Sun, 07 Mar 2021 19:55:55 -0500, wrote:

On Sun, 7 Mar 2021 12:21:12 -0600, Leon lcb11211@swbelldotnet wrote:

On 3/7/2021 11:01 AM, Jay Irvine wrote:
I realize this is a really old post, but I just ran across it because
the pin fell out of my miter gauge during a move. After reading it and
all the replies. I was set to buy a new one because I didn't find
replacement pins on any of the parts or Jet website. I went over to
Lowes and bought a package of 1/4" roll pins for $.98. (2 pack) drove
one in and problem solved. the gauge works perfectly and I don't think
I'll ever need the 2nd pin.



You will need the second pin just after you forget where the second one
is it.

Throw it away not. You'll save yourself a lot of grief down the road.
^^^ now
;-)