Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Laminate refinishing ...
Can anyone suggest a decent way to refinish laminate tops (bathroom) short
of total replacement? Are there are any finishes that can be used? What preparations steps would be needed. TIA -- LoboMike, "He who will not reason is a bigot; he who cannot is a fool; and he who dares not is a slave." -- Sir William Drummond |
#2
|
|||
|
|||
I have seen them painted. Clean with solvent, scruff with 400 grit
paper, clean again and get out the oil enamal or epoxy of choice. Might be faster if it has square surfaces to glue on some new laminate. "lobomike" wrote: Can anyone suggest a decent way to refinish laminate tops (bathroom) short of total replacement? Are there are any finishes that can be used? What preparations steps would be needed. TIA |
#3
|
|||
|
|||
I have seen them painted. Clean with solvent, scruff with 400 grit
paper, clean again and get out the oil enamal or epoxy of choice. Might be faster if it has square surfaces to glue on some new laminate. If you're going to paint, use melamine paint, applied in thin coats with a foam roller. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
That laminate vs new wood flooring Q - thanks | UK diy |