Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old December 15th 20, 05:55 PM posted to rec.woodworking
external usenet poster
 
First recorded activity by DIYBanter: Nov 2006
Posts: 14,497
Default Simple dovetails

On Tuesday, December 15, 2020 at 11:12:16 AM UTC-5, Leon wrote:
On 12/14/2020 8:43 PM, DerbyDad03 wrote:
On Monday, December 14, 2020 at 7:33:20 PM UTC-5, Leon wrote:
On 12/14/2020 5:19 PM, DerbyDad03 wrote:
On Monday, December 14, 2020 at 5:39:16 PM UTC-5, wrote:
On Mon, 14 Dec 2020 17:25:08 -0500, Ed Pawlowski wrote:

I can cut these by hand but I just have not had the right project yet.
I will though, and then show how well I did them.

https://imgur.com/gallery/XWNfCGL
How do those work? Unless I'm not seeing this with the right POV, I
don't see how these are put together.

Look at the first comment...

Oh, never mind...I'll save you the work...

https://i.imgur.com/ft8lrRx.png

No, I think they are simply stacked. The reference you showed is a
guess of how that went together.


That's what the image I linked to shows. Stacked.

OOPS! Sorry, I saw that drawing as a sliding in at 45 degree DT's.


No problem! It is a pretty neat method, assuming you are really good
with a chisel and a rasp.

Would the Origin have helped with that? ;-)




  #12   Report Post  
Old December 15th 20, 07:09 PM posted to rec.woodworking
external usenet poster
 
First recorded activity by DIYBanter: Apr 2011
Posts: 11,739
Default Simple dovetails

On 12/15/2020 10:55 AM, DerbyDad03 wrote:
On Tuesday, December 15, 2020 at 11:12:16 AM UTC-5, Leon wrote:
On 12/14/2020 8:43 PM, DerbyDad03 wrote:
On Monday, December 14, 2020 at 7:33:20 PM UTC-5, Leon wrote:
On 12/14/2020 5:19 PM, DerbyDad03 wrote:
On Monday, December 14, 2020 at 5:39:16 PM UTC-5, wrote:
On Mon, 14 Dec 2020 17:25:08 -0500, Ed Pawlowski wrote:

I can cut these by hand but I just have not had the right project yet.
I will though, and then show how well I did them.

https://imgur.com/gallery/XWNfCGL
How do those work? Unless I'm not seeing this with the right POV, I
don't see how these are put together.

Look at the first comment...

Oh, never mind...I'll save you the work...

https://i.imgur.com/ft8lrRx.png

No, I think they are simply stacked. The reference you showed is a
guess of how that went together.

That's what the image I linked to shows. Stacked.

OOPS! Sorry, I saw that drawing as a sliding in at 45 degree DT's.


No problem! It is a pretty neat method, assuming you are really good
with a chisel and a rasp.

Would the Origin have helped with that? ;-)



no
  #13   Report Post  
Old December 15th 20, 08:18 PM posted to rec.woodworking
external usenet poster
 
First recorded activity by DIYBanter: Dec 2017
Posts: 1,289
Default Simple dovetails

On 12/15/2020 10:55 AM, DerbyDad03 wrote:
On Tuesday, December 15, 2020 at 11:12:16 AM UTC-5, Leon wrote:
On 12/14/2020 8:43 PM, DerbyDad03 wrote:
On Monday, December 14, 2020 at 7:33:20 PM UTC-5, Leon wrote:

....

OOPS! Sorry, I saw that drawing as a sliding in at 45 degree DT's.


When first seen, the 45 DT is a pretty mind-boggling joint, too.

No problem! It is a pretty neat method, assuming you are really good
with a chisel and a rasp.


Be interesting to have video of the cutting.

I wonder how much is actually shaped that intricately -- perhaps its
only ornamental outer couple inches and the rest inside is just a
straight section.

....

--
  #14   Report Post  
Old December 15th 20, 10:00 PM posted to rec.woodworking
external usenet poster
 
First recorded activity by DIYBanter: Jan 2007
Posts: 1,994
Default Simple dovetails

On Monday, December 14, 2020 at 2:39:16 PM UTC-8, wrote:
On Mon, 14 Dec 2020 17:25:08 -0500, Ed Pawlowski wrote:

I can cut these by hand but I just have not had the right project yet.
I will though, and then show how well I did them.

https://imgur.com/gallery/XWNfCGL

How do those work? Unless I'm not seeing this with the right POV, I
don't see how these are put together.


You can do wonders with Plastic Wood....
  #15   Report Post  
Old December 25th 20, 09:31 PM posted to rec.woodworking
external usenet poster
 
First recorded activity by DIYBanter: Dec 2020
Posts: 1
Default Simple dovetails

Buddy you can once look at this article : https://theedgecutter.com/how-to-hand-cut-dovetails/
I found this article much helpful to Cut Dovetails by Hand.

--
For full context, visit https://www.homeownershub.com/woodwo...s-3081080-.htm



  #16   Report Post  
Old December 26th 20, 05:29 PM posted to rec.woodworking
external usenet poster
 
First recorded activity by DIYBanter: Oct 2011
Posts: 447
Default Simple dovetails

On Tuesday, December 15, 2020 at 1:18:58 PM UTC-6, dpb wrote:
On 12/15/2020 10:55 AM, DerbyDad03 wrote:
On Tuesday, December 15, 2020 at 11:12:16 AM UTC-5, Leon wrote:
On 12/14/2020 8:43 PM, DerbyDad03 wrote:
On Monday, December 14, 2020 at 7:33:20 PM UTC-5, Leon wrote:

...
OOPS! Sorry, I saw that drawing as a sliding in at 45 degree DT's.

When first seen, the 45 DT is a pretty mind-boggling joint, too.
No problem! It is a pretty neat method, assuming you are really good
with a chisel and a rasp.

Be interesting to have video of the cutting.

I wonder how much is actually shaped that intricately -- perhaps its
only ornamental outer couple inches and the rest inside is just a
straight section.

...

--

Here's a series of videos. It looks like a blast.

https://www.youtube.com/watch?v=1p9Thn4uVZE


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Through dovetails on a half blind template. toller Woodworking 1 January 2nd 05 09:13 PM
Need Dovetail Jig That Can Do Half-Blind and Through-Dovetails Jay Chan Woodworking 21 April 8th 04 05:11 AM
sliding dovetails Micheal R. Frichette Woodworking 13 March 25th 04 04:57 PM
Web Site Update - Dovetails & Mortising Jeff Gorman Woodworking 3 September 10th 03 12:21 PM
Dovetails and chipout danh Woodworking 10 July 26th 03 02:55 PM


All times are GMT +1. The time now is 02:07 PM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017