Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

Latest Projects:
Cutting up and cleaning up limbs and debris from Hurricane Delta. Had a window sash damaged, now repaired, otherwise I had no damaged compared to others in the neighborhood.

Finished making the main door and screen door for my nephew's pool house, 2 coats of finish on it, one more coat to go. All those moldings, 60 of them, may have been the worse part of the job. Still need to make the door framing, but that shouldn't take too long.
https://www.flickr.com/photos/438361...in/photostream
The new doorway will replace this:
https://www.flickr.com/photos/438361...in/photostream

Had a nice upholstery job, paid about $2K, so I bought a wood threader from Fine Tools: 50mm, item 301865 @ $861.21 + $159 Euro. Never thought about it when making the order, but discovered later an additional $60 US for import fee. It's to arrive today.
https://www.fine-tools.com/gewind.html

Sonny
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default One Hobby Supports Another, Plus

On 10/16/2020 8:23 AM, Sonny wrote:
Latest Projects:
Cutting up and cleaning up limbs and debris from Hurricane Delta. Had a window sash damaged, now repaired, otherwise I had no damaged compared to others in the neighborhood.

Finished making the main door and screen door for my nephew's pool house, 2 coats of finish on it, one more coat to go. All those moldings, 60 of them, may have been the worse part of the job. Still need to make the door framing, but that shouldn't take too long.
https://www.flickr.com/photos/438361...in/photostream


Great looking door!!!




The new doorway will replace this:
https://www.flickr.com/photos/438361...in/photostream

Had a nice upholstery job, paid about $2K, so I bought a wood threader from Fine Tools: 50mm, item 301865 @ $861.21 + $159 Euro. Never thought about it when making the order, but discovered later an additional $60 US for import fee. It's to arrive today.
https://www.fine-tools.com/gewind.html

Sonny


Kinda spendy, huh. But if it does what you want it to do....
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Friday, October 16, 2020 at 10:07:47 AM UTC-5, Leon wrote:
On 10/16/2020 8:23 AM, Sonny wrote:


Finished making the main door ....
https://www.flickr.com/photos/438361...in/photostream


Great looking door!!!


Thanks. I don't have dedicated door tools. The main frame was easy enough, rabbeting the edges for the molding, but hand chiseling the mortises for the glass panes framing. Those pane framings I had to hand cut the tenons/profiles to fit the mortises.... time consuming, but late in the evenings relaxing in the shop, listening to the radio, little by little all got done. My usual procedure, go out there and take it easy. I have good tools for hand work.

.... wood threader from Fine Tools: 50mm, item 301865 @ $861.21 + $159 Euro. Never thought about it when making the order, but discovered later an additional $60 US for import fee. It's to arrive today.
https://www.fine-tools.com/gewind.html


Kinda spendy, huh. But if it does what you want it to do....


"Kinda" is not quite accurate. My jaw dropped when I first saw the price, some months ago. I debated and procrastinated a long time. I really want to get these two antique work tables in good shape. I may find another project for the threading tool, in the future. My upholstery money is extra cash and I don't play the casinos. Also, I considered, one of my nephews will inherit some of my major tools. He and his son has shown me woodworking interests. Good guys deserve nice gifts.

BTW, the $159 Euro fee was for shipping, though you may have reasoned that.

Sonny

  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Friday, October 16, 2020 at 11:43:27 AM UTC-5, Sonny wrote:
On Friday, October 16, 2020 at 10:07:47 AM UTC-5, Leon wrote:


Great looking door!!!


Thanks. I don't have dedicated door tools....

A few more pics, scroll right for 2 mo
https://www.flickr.com/photos/438361...posted-public/

Sonny
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 499
Default One Hobby Supports Another, Plus

On Friday, October 16, 2020 at 8:23:34 AM UTC-5, Sonny wrote:
The new doorway will replace this:
https://www.flickr.com/photos/438361...in/photostream

Sonny


Based on what the old screen door and door looked like, I am not sure you could say the hurricane Delta really harmed your nephew's pool house. It needed immediate replacement whether there was a hurricane or not.


  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Friday, October 16, 2020 at 3:04:56 PM UTC-5, wrote:
On Friday, October 16, 2020 at 8:23:34 AM UTC-5, Sonny wrote:
The new doorway will replace this:
https://www.flickr.com/photos/438361...in/photostream

Sonny


Based on what the old screen door and door looked like, I am not sure you could say the hurricane Delta really harmed your nephew's pool house. It needed immediate replacement whether there was a hurricane or not.


LOL. You've misunderstood. Nephew bought this old farm 5-6 months ago. The pool house was built poorly in the first place. I'd been working, off & on, on the door for maybe 2 months. We refinished his son's bedroom wood floor and I built him a TV cabinet/desk with some old salvaged long leaf pine, also. Scroll right for 2 more pics. https://www.flickr.com/photos/438361...in/photostream

Nephew and son razed the old falling-apart barn and will build a new one.
https://www.flickr.com/photos/438361...posted-public/
https://www.flickr.com/photos/438361...posted-public/

I haven't heard that they had storm damage, but I'll see when I go (hopefully) next weekend to install the door.... that's the plan.

Sonny
  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default One Hobby Supports Another, Plus

On 10/16/2020 11:46 AM, Sonny wrote:
On Friday, October 16, 2020 at 11:43:27 AM UTC-5, Sonny wrote:
On Friday, October 16, 2020 at 10:07:47 AM UTC-5, Leon wrote:


Great looking door!!!


Thanks. I don't have dedicated door tools....

A few more pics, scroll right for 2 mo
https://www.flickr.com/photos/438361...posted-public/

Sonny


Looking good!!!

The second and third picture immediately reminded my of how I do the
back face frames on my cabinets...

https://www.flickr.com/photos/lcb112...7622991960362/
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default One Hobby Supports Another, Plus

On 10/16/2020 11:43 AM, Sonny wrote:
On Friday, October 16, 2020 at 10:07:47 AM UTC-5, Leon wrote:
On 10/16/2020 8:23 AM, Sonny wrote:


Finished making the main door ....
https://www.flickr.com/photos/438361...in/photostream


Great looking door!!!


Thanks. I don't have dedicated door tools. The main frame was easy enough, rabbeting the edges for the molding, but hand chiseling the mortises for the glass panes framing. Those pane framings I had to hand cut the tenons/profiles to fit the mortises.... time consuming, but late in the evenings relaxing in the shop, listening to the radio, little by little all got done. My usual procedure, go out there and take it easy. I have good tools for hand work.

.... wood threader from Fine Tools: 50mm, item 301865 @ $861.21 + $159 Euro. Never thought about it when making the order, but discovered later an additional $60 US for import fee. It's to arrive today.
https://www.fine-tools.com/gewind.html


Kinda spendy, huh. But if it does what you want it to do....


"Kinda" is not quite accurate. My jaw dropped when I first saw the price, some months ago. I debated and procrastinated a long time. I really want to get these two antique work tables in good shape. I may find another project for the threading tool, in the future. My upholstery money is extra cash and I don't play the casinos. Also, I considered, one of my nephews will inherit some of my major tools. He and his son has shown me woodworking interests. Good guys deserve nice gifts.

BTW, the $159 Euro fee was for shipping, though you may have reasoned that.

Sonny


Perhaps you could do some work with thse thread cutters for individuals.
;~)
  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Saturday, October 17, 2020 at 6:37:41 PM UTC-5, Leon wrote:


Perhaps you could do some work with thse thread cutters for individuals.
;~)


That crossed my mind. I've never heard of anyone wanting or looking for large threaders or the service. Maybe, since large threaders are not so readily available, folks just don't inquire or mention the need.

Since these are so expensive, I think I'd have a user come to my shop and they do the work. I'd charge a fee for the tool use. I need to learn the tool, see how easy/hard it is to work with, before establishing a rental-use or threading service procedure/policy.

This threader set is a birthday gift to myself, along with a new power washer due to arrive tomorrow.
https://www.lowes.com/pd/PowerBoss-3...ARB/1002651200

Sonny

  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 524
Default One Hobby Supports Another, Plus

On Sun, 18 Oct 2020 07:58:11 -0700 (PDT), Sonny
wrote:

On Saturday, October 17, 2020 at 6:37:41 PM UTC-5, Leon wrote:


Perhaps you could do some work with thse thread cutters for individuals.
;~)


That crossed my mind. I've never heard of anyone wanting or looking for large threaders or the service. Maybe, since large threaders are not so readily available, folks just don't inquire or mention the need.


Or they find another option. For that amount of money I'd have been
tempted to go with a lathe.

Since these are so expensive, I think I'd have a user come to my shop and they do the work. I'd charge a fee for the tool use. I need to learn the tool, see how easy/hard it is to work with, before establishing a rental-use or threading service procedure/policy.

This threader set is a birthday gift to myself, along with a new power washer due to arrive tomorrow.
https://www.lowes.com/pd/PowerBoss-3...ARB/1002651200




Sonny



  #11   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 643
Default One Hobby Supports Another, Plus

Sonny wrote:

On Saturday, October 17, 2020 at 6:37:41 PM UTC-5, Leon wrote:


Perhaps you could do some work with thse thread cutters for individuals.
;~)


That crossed my mind. I've never heard of anyone wanting or looking for large threaders or the service. Maybe, since large threaders are not so readily available, folks just don't inquire or mention the need.


~1/2" smaller dia, ~$950 less expensive: https://www.amazon.com/dp/B076MR39LF


Since these are so expensive, I think I'd have a user come to my shop and they do the work. I'd charge a fee for the tool use. I need to learn the tool, see how easy/hard it is to work with, before establishing a rental-use or threading service procedure/policy.

This threader set is a birthday gift to myself, along with a new power washer due to arrive tomorrow.
https://www.lowes.com/pd/PowerBoss-3...ARB/1002651200

Sonny


  #12   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default One Hobby Supports Another, Plus

On 10/18/2020 9:58 AM, Sonny wrote:
On Saturday, October 17, 2020 at 6:37:41 PM UTC-5, Leon wrote:


Perhaps you could do some work with thse thread cutters for individuals.
;~)


That crossed my mind. I've never heard of anyone wanting or looking for large threaders or the service. Maybe, since large threaders are not so readily available, folks just don't inquire or mention the need.

Since these are so expensive, I think I'd have a user come to my shop and they do the work. I'd charge a fee for the tool use. I need to learn the tool, see how easy/hard it is to work with, before establishing a rental-use or threading service procedure/policy.

This threader set is a birthday gift to myself, along with a new power washer due to arrive tomorrow.
https://www.lowes.com/pd/PowerBoss-3...ARB/1002651200

Sonny



I would not rent the tool out, I would offer the service. You could
keep a small inventory of parts to sell or have custom orders.

Keep us informed how this thing works. ;~)
  #13   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default One Hobby Supports Another, Plus

On Fri, 16 Oct 2020 09:46:39 -0700 (PDT), Sonny
wrote:

On Friday, October 16, 2020 at 11:43:27 AM UTC-5, Sonny wrote:
On Friday, October 16, 2020 at 10:07:47 AM UTC-5, Leon wrote:


Great looking door!!!


Thanks. I don't have dedicated door tools....

A few more pics, scroll right for 2 mo
https://www.flickr.com/photos/438361...posted-public/


Nice!
  #14   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Sunday, October 18, 2020 at 1:52:49 PM UTC-5, J. Clarke wrote:



Or they find another option. For that amount of money I'd have been
tempted to go with a lathe.


Another option: I had asked a machinist if he could make the threads. He thought he could, for $50 a nut. I need 2 nuts.

I have a basic 1950s Craftsman lathe, but it isn't for thread making. Don't know if it can be modified for threading. I don't want another big tool as that, besides, I'm not that confident a turner at all.

Sonny
  #15   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Sunday, October 18, 2020 at 4:33:07 PM UTC-5, Spalted Walt wrote:


~1/2" smaller dia, ~$950 less expensive: https://www.amazon.com/dp/B076MR39LF


I want to match what's on the tables. I looked hard at those smaller thread sets. I sensed I'd never be completely satisfied, always knowing I went smaller.

Sonny


  #16   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Sunday, October 18, 2020 at 4:33:24 PM UTC-5, Leon wrote:


I would not rent the tool out, I would offer the service. You could
keep a small inventory of parts to sell or have custom orders.

Keep us informed how this thing works. ;~)


A parts inventory is a good idea. I'm sure a little practice will help that cause.

There's a video I've watched several times, 2-3 months ago, using this tool. Looks easy enough. I can't locate the video.

Sonny
  #17   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Sunday, October 18, 2020 at 5:25:18 PM UTC-5, wrote:
On Fri, 16 Oct 2020 09:46:39 -0700 (PDT), Sonny
wrote:

On Friday, October 16, 2020 at 11:43:27 AM UTC-5, Sonny wrote:
On Friday, October 16, 2020 at 10:07:47 AM UTC-5, Leon wrote:


Great looking door!!!

Thanks. I don't have dedicated door tools....

A few more pics, scroll right for 2 mo
https://www.flickr.com/photos/438361...posted-public/


Nice!


Thanks. My nephew better appreciate the time it took.

Sonny
  #18   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default One Hobby Supports Another, Plus

On Sun, 18 Oct 2020 15:48:39 -0700 (PDT), Sonny
wrote:

On Sunday, October 18, 2020 at 1:52:49 PM UTC-5, J. Clarke wrote:



Or they find another option. For that amount of money I'd have been
tempted to go with a lathe.


Another option: I had asked a machinist if he could make the threads. He thought he could, for $50 a nut. I need 2 nuts.

I have a basic 1950s Craftsman lathe, but it isn't for thread making. Don't know if it can be modified for threading. I don't want another big tool as that, besides, I'm not that confident a turner at all.

I've seen wood lathe tools, from Sorby, intended for cutting threads.
They would only do the bolt (male) side, I think.
  #19   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Monday, October 19, 2020 at 10:28:13 AM UTC-5, wrote:
On Sun, 18 Oct 2020 15:48:39 -0700 (PDT), Sonny
wrote:

On Sunday, October 18, 2020 at 1:52:49 PM UTC-5, J. Clarke wrote:



Or they find another option. For that amount of money I'd have been
tempted to go with a lathe.


Another option: I had asked a machinist if he could make the threads. He thought he could, for $50 a nut. I need 2 nuts.

I have a basic 1950s Craftsman lathe, but it isn't for thread making. Don't know if it can be modified for threading. I don't want another big tool as that, besides, I'm not that confident a turner at all.

I've seen wood lathe tools, from Sorby, intended for cutting threads.
They would only do the bolt (male) side, I think.


Lake Erie Toolworks has the parts, but the wrong size for my tables. I'd have to modify parts of the tables for the Erie parts to fit. Altogether cheaper, but I wanted to maintain the tables originality. I simply got a bit frustrated with finding an alternative I was comfortable with (lots of "make your own threads" videos.... how, what to choose), so I bit the bullet and bought the Dieter Schmid tool.
https://www.lakeerietoolworks.com/co...ise-screw-kits

Sonny
  #20   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 49
Default One Hobby Supports Another, Plus

On 10/18/2020 4:33 PM, Spalted Walt wrote:

. . . along with a new power washer due to arrive tomorrow.
https://www.lowes.com/pd/PowerBoss-3...ARB/1002651200


I've had the very same power washer about 7 years now - been a great
machine. Just changed oil yesterday for the first time in memory
[Amsoil Small Engine 10w30].

Dave in SoTex


  #21   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default One Hobby Supports Another, Plus

On Tuesday, October 20, 2020 at 9:32:58 AM UTC-5, Dave in SoTex wrote:

I've had the very same power washer about 7 years now - been a great
machine. Just changed oil yesterday for the first time in memory
[Amsoil Small Engine 10w30].

Dave in SoTex


Good to know. Thanks.

Power washer was delivered to the neighbor 3 doors down. Neighbor called me that it was there. I think UPS screwed up both deliveries.

Threader didn't arrive Friday. Tracking noted UPS "tried to deliver". I was home all day. Picked it up Monday from the access point. The tool is much more beefy than I thought, big hunks of metal and heavy duty. Looking forward to using it, likely tonight. The 2 nut blanks I cut 2 months ago has been soaking in mineral oil since then.

Sonny
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SOME CHINK ASKS ABOUT THE "meaning of 'plus' in 'Grammar Plus'" David Home Repair 10 October 31st 18 06:02 PM
SOME CHINK ASKS ABOUT THE "meaning of 'plus' in 'Grammar Plus'" David Home Repair 5 October 30th 18 05:18 PM
table lamp with two lights one outside and one inside body ,if one litghts up the other one is dim Renee Adair Home Repair 6 October 14th 17 04:44 PM
It can be a challenge for many plus size women to find plus sizematernity clothing including maternity swimwear. In fact, many pregnant womenmost especially those who are plus size wouldn't want themselves caughtwearing swimsuits. But then again, how [email protected] Electronics Repair 0 April 21st 08 12:01 PM


All times are GMT +1. The time now is 10:28 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"