Thread size
Instructions state output thread is 3/4 x 16. Ordered a 4-jaw chuck that will
not seat tight. Measured lathe thread - it comes out .701 (11/16) x 10, NOT 3/4 x 16 as mentioned in the instruction book. Is there any way to use this chuck? -- for full context, visit https://www.homeownershub.com/woodwo...ze-825005-.htm |
Thread size
Dave Rawlings m
writes: Instructions state output thread is 3/4 x 16. Ordered a 4-jaw chuck that will not seat tight. Measured lathe thread - it comes out .701 (11/16) x 10, NOT 3/4 x 16 as mentioned in the instruction book. Is there any way to use this chuck? Hmmm... could that be 18mm x 2.5 ? (not that it helps) |
Thread size
On Friday, July 17, 2020 at 8:14:03 PM UTC-4, Dave Rawlings wrote:
Instructions state output thread is 3/4 x 16. Ordered a 4-jaw chuck that will not seat tight. Measured lathe thread - it comes out .701 (11/16) x 10, NOT 3/4 x 16 as mentioned in the instruction book. Is there any way to use this chuck? -- for full context, visit https://www.homeownershub.com/woodwo...ze-825005-.htm Make a new backing plate. |
Thread size
On Friday, July 17, 2020 at 7:14:03 PM UTC-5, Dave Rawlings wrote:
Instructions state output thread is 3/4 x 16. Ordered a 4-jaw chuck that will not seat tight. Measured lathe thread - it comes out .701 (11/16) x 10, NOT 3/4 x 16 as mentioned in the instruction book. Is there any way to use this chuck? -- for full context, visit https://www.homeownershub.com/woodwo...ze-825005-.htm If you can, return the chuck. Most quality chucks now come with interchangeable inserts. If you cannot return it, you have two choices you can either throw it away and get a name brand chuck or you can have a machine shop make you an adapter. The second is cheaper, the first is the better choice. |
All times are GMT +1. The time now is 11:28 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter