|
The trip and Hartland Hardware !!!!!!
So.... my wife and I just got back from our "oblgation" trip, 12 days on
the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! |
The trip and Hartland Hardware !!!!!!
On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote:
So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! |
The trip and Hartland Hardware !!!!!!
On 1/1/2020 2:32 PM, DerbyDad03 wrote:
On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! I thought it was obvious from the way Day 6 in North Canton, Ohio was phrased. |
The trip and Hartland Hardware !!!!!!
On Wed, 1 Jan 2020 13:16:37 -0600, Leon lcb11211@swbelldotnet wrote:
So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) I'm just happy we have a few hundred Lowes and BORGs, plus a couple of Woodcrafts and Rocklers, and a Peachtree and a Highland in easy driving range (if you could call driving anywhere in Atlanta "easy"). OTOH, we're really short on decent hardware stores. Happy New Year!!!!! +1 |
The trip and Hartland Hardware !!!!!!
Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7-
: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. Day 10 On to Bentonville AR. Walmart museum? Not a bad place to spend a few hours. Puckdropper |
The trip and Hartland Hardware !!!!!!
Puckdropper wrote:
Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. Day 10 On to Bentonville AR. Walmart museum? Not a bad place to spend a few hours. Puckdropper Never heard of the WalMart museum, but was in Bentonville when WalMart was just starting to expand and went in the original store. It was a tiny store, dark and dingy, with narrow aisles and stuff stacked 9 ft high. -- G Ross |
The trip and Hartland Hardware !!!!!!
On 1/1/2020 1:32 PM, DerbyDad03 wrote:
On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! LOL, I feel it was an obligation trip. ;~) But the new F150 was a dream..... |
The trip and Hartland Hardware !!!!!!
|
The trip and Hartland Hardware !!!!!!
On 1/1/2020 11:36 PM, Puckdropper wrote:
Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. We were close to Sikeston. What is Lamberts? Day 10 On to Bentonville AR. Walmart museum? Nope, we had an early stop for over night in Bentonville. We specifically stopped there to see the Crystal Bridge Museum.. Very cool! Not a bad place to spend a few hours. Puckdropper |
The trip and Hartland Hardware !!!!!!
On 1/2/2020 7:43 AM, G Ross wrote:
Puckdropper wrote: Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1Â* From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. Day 10 On to Bentonville AR. Walmart museum? Not a bad place to spend a few hours. Puckdropper Never heard of the WalMart museum, butÂ* was in Bentonville when WalMart was just starting to expand and went in the original store. It was a tiny store, dark and dingy, with narrow aisles and stuff stacked 9 ft high. Heck I used to go to the original Whataburger in Corpus Christi. Small is a good description, you ordered outside and was handed your order outside. https://whataburger.com/home |
The trip and Hartland Hardware !!!!!!
|
The trip and Hartland Hardware !!!!!!
Leon lcb11211@swbelldotnet writes:
In case some of you have not seen or visited Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away. This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o |
The trip and Hartland Hardware !!!!!!
On 1/2/2020 3:37 PM, Scott Lurndal wrote:
Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visited Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away. This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish. Service was stellar. |
The trip and Hartland Hardware !!!!!!
On Thu, 2 Jan 2020 15:13:48 -0600, Leon lcb11211@swbelldotnet wrote:
On 1/1/2020 11:36 PM, Puckdropper wrote: Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. We were close to Sikeston. What is Lamberts? Home of throwed rolls, they toss the bread rolls. A now closed restaurant, in Murphysboro, Illinois stole they're best roll thrower to one up them. Day 10 On to Bentonville AR. Walmart museum? Nope, we had an early stop for over night in Bentonville. We specifically stopped there to see the Crystal Bridge Museum.. Very cool! Not a bad place to spend a few hours. Puckdropper |
The trip and Hartland Hardware !!!!!!
On Thursday, January 2, 2020 at 4:16:52 PM UTC-5, Leon wrote:
On 1/2/2020 7:43 AM, G Ross wrote: Puckdropper wrote: Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1Â* From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. Day 10 On to Bentonville AR. Walmart museum? Not a bad place to spend a few hours. Puckdropper Never heard of the WalMart museum, butÂ* was in Bentonville when WalMart was just starting to expand and went in the original store. It was a tiny store, dark and dingy, with narrow aisles and stuff stacked 9 ft high. Heck I used to go to the original Whataburger in Corpus Christi. Small is a good description, you ordered outside and was handed your order outside. https://whataburger.com/home The drive home to western NY from the annual championship Soap Box Derby races in Akron always included a stop at Quaker Steak and Lube in Erie, PA, just a block or so off I-90. One year we took a day away from Derby Downs and drove to the original Quaker Steak and Lube in Sharon PA. Nothing like the humongous franchises seen elsewhere. https://thelube.com/locations/pennsy...iginal-sharon/ |
The trip and Hartland Hardware !!!!!!
On Thu, 02 Jan 2020 16:43:31 -0600, Markem
wrote: On Thu, 2 Jan 2020 15:13:48 -0600, Leon lcb11211@swbelldotnet wrote: On 1/1/2020 11:36 PM, Puckdropper wrote: Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. We were close to Sikeston. What is Lamberts? Home of throwed rolls, they toss the bread rolls. A now closed restaurant, in Murphysboro, Illinois stole they're best roll thrower to one up them. https://throwedrolls.com/ Should have done that before |
The trip and Hartland Hardware !!!!!!
On Thu, 02 Jan 2020 20:52:24 -0500, Clare Snyder
wrote: On Thu, 02 Jan 2020 21:37:19 GMT, (Scott Lurndal) wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visited Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away. This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o You need to take a trip up toWelbeck Sawmill just north of Durham Ontario if you are liiking for an assortment of woodworking tools! for a short introduction see https://seaandskirealty.ca/local-bus...lbeck-sawmill/ and https://www.welbecksawmill.com/ |
The trip and Hartland Hardware !!!!!!
Leon lcb11211@swbelldotnet wrote in
: On 1/1/2020 11:36 PM, Puckdropper wrote: Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. We were close to Sikeston. What is Lamberts? https://throwedrolls.com/lamberts-cafe-i/ We just looked for the signs when we headed that way. We usually stop at the one in Ozark, MO about halfway between Springfield and Branson. Day 10 On to Bentonville AR. Walmart museum? Nope, we had an early stop for over night in Bentonville. We specifically stopped there to see the Crystal Bridge Museum.. Very cool! I'm going to have to check that out. My Aunt lives just outside Fayetteville. Puckdropper |
The trip and Hartland Hardware !!!!!!
On Thu, 2 Jan 2020 15:08:06 -0600, Leon lcb11211@swbelldotnet wrote:
On 1/1/2020 1:32 PM, DerbyDad03 wrote: On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! LOL, I feel it was an obligation trip. ;~) But the new F150 was a dream..... My older ('13) F150 runs like a dream too but we took SWMBO's '19 Mustang to Vermont in October. Good thing because I had a seizure while we were there (day before we were supposed to leave) and she had to drive the entire trip home. I can't drive until mid-April, assuming nothing else happens. :-( :-( |
The trip and Hartland Hardware !!!!!!
On Thu, 2 Jan 2020 16:14:42 -0600, Leon lcb11211@swbelldotnet wrote:
On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visited Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away. This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish. Service was stellar. Not surprising. When we lived in Kent, OH, we shopped at a lot of the Amish furniture stores/makers. We bought our dining room and bedroom sets there, and a king sized quilt to go along with it. All very nice people. Interestingly, many had electric lights and power tools, and even a web site. I asked about this and they were very gracious, explaining that business is business and personal comfort is an entirely different thing. Even so, the store and shop (the owner gave me a tour) had their own generators. They were completely off-grid. A few other stores had gas lights (rather hot during the summers). |
The trip and Hartland Hardware !!!!!!
|
The trip and Hartland Hardware !!!!!!
On 1/2/2020 10:31 PM, Puckdropper wrote:
Leon lcb11211@swbelldotnet wrote in : On 1/1/2020 11:36 PM, Puckdropper wrote: Leon lcb11211@swbelldotnet wrote in news:1cCdnfpQH6KFbZHDnZ2dnUU7- : So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. You're getting close to Lambert's in Sikeston, but it's probably a good detour if you're on the way to Indiana. We were close to Sikeston. What is Lamberts? https://throwedrolls.com/lamberts-cafe-i/ We just looked for the signs when we headed that way. We usually stop at the one in Ozark, MO about halfway between Springfield and Branson. Day 10 On to Bentonville AR. Walmart museum? Nope, we had an early stop for over night in Bentonville. We specifically stopped there to see the Crystal Bridge Museum.. Very cool! I'm going to have to check that out. My Aunt lives just outside Fayetteville. Puckdropper https://crystalbridges.org/ Plus a load of walking trails. |
The trip and Hartland Hardware !!!!!!
On 1/2/2020 4:14 PM, Leon wrote:
On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visitedÂ* Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away.Â* This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish.Â* Service was stellar. 7 Corners Ace was truly Mecca for the woodworker or tool junkie. Used to go up there to visit my daughter in grad school and would always make a stop at 7 Corners to browse and then go to the Italian Deli/Restaurant across the street to grab some lunch. In the Chicago metro area, THE place to go and drool is Berland's House of Tools. https://www.berlandstools.com/ Rather sign large inside that reads "If We Don't Have It, You Don't Need It!" I'll have to admit though, looking at Hartville's website, they probably have Berland's beat. |
The trip and Hartland Hardware !!!!!!
On Friday, January 3, 2020 at 5:52:52 PM UTC-5, Unquestionably Confused wrote:
On 1/2/2020 4:14 PM, Leon wrote: On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visitedÂ* Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away.Â* This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish.Â* Service was stellar. 7 Corners Ace was truly Mecca for the woodworker or tool junkie. Used to go up there to visit my daughter in grad school and would always make a stop at 7 Corners to browse and then go to the Italian Deli/Restaurant across the street to grab some lunch. If I went there, I'd eat first. Gotta keep your strength up while browsing the tool aisle. You might have to carry something out. ;-) |
The trip and Hartland Hardware !!!!!!
On 1/3/2020 5:21 PM, DerbyDad03 wrote:
On Friday, January 3, 2020 at 5:52:52 PM UTC-5, Unquestionably Confused wrote: On 1/2/2020 4:14 PM, Leon wrote: On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visitedÂ* Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away.Â* This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish.Â* Service was stellar. 7 Corners Ace was truly Mecca for the woodworker or tool junkie. Used to go up there to visit my daughter in grad school and would always make a stop at 7 Corners to browse and then go to the Italian Deli/Restaurant across the street to grab some lunch. If I went there, I'd eat first. Gotta keep your strength up while browsing the tool aisle. You might have to carry something out. ;-) Truly a shame that it closed. It was like walking back in time. I don't that I've ever seen so much NOS in one place. It was everywhere. What immediately struck me was the layout in what I believe was likely the original store (IIRC the whole thing took up several buildings). I walked down aisles that had shelves maybe 10'-12' high and there was no sliding ladder nor room to roll one of those steps units like at the big box stores. Merchandise was stacked floor to ceiling with no obvious organization (at least in that area of the store). I'm a big guy (6'4" and 250+) and was feeling a bit claustrophobic. Upstairs in that building (or perhaps it was the one immediately to the south) was their higher end stuff. Surveying equipment, and the more expensive stuff. That area at least had room to breath. All in all it was quite a surprise to me as they were one of the first places I made mail order purchases of tools from, back when they ran ads in every issue of Fine Woodworking. It's really a shame that those wood butchers who follow in our footsteps in coming years will be unlikely to experience stuff like this. It was a great experience though. On my last trip there I found a large box containing 48 metal boxes about 4"x6"x"4", nicely painted. I think I bought them for about $25. Drilled narrow end for some cheap wood knobs and damn, those suckers hold a ton of hardware. ;) |
The trip and Hartland Hardware !!!!!!
On Fri, 3 Jan 2020 19:16:49 -0600, Unquestionably Confused
wrote: On 1/3/2020 5:21 PM, DerbyDad03 wrote: On Friday, January 3, 2020 at 5:52:52 PM UTC-5, Unquestionably Confused wrote: On 1/2/2020 4:14 PM, Leon wrote: On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visitedÂ* Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away.Â* This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish.Â* Service was stellar. 7 Corners Ace was truly Mecca for the woodworker or tool junkie. Used to go up there to visit my daughter in grad school and would always make a stop at 7 Corners to browse and then go to the Italian Deli/Restaurant across the street to grab some lunch. If I went there, I'd eat first. Gotta keep your strength up while browsing the tool aisle. You might have to carry something out. ;-) Truly a shame that it closed. It was like walking back in time. I don't that I've ever seen so much NOS in one place. It was everywhere. What immediately struck me was the layout in what I believe was likely the original store (IIRC the whole thing took up several buildings). I walked down aisles that had shelves maybe 10'-12' high and there was no sliding ladder nor room to roll one of those steps units like at the big box stores. Merchandise was stacked floor to ceiling with no obvious organization (at least in that area of the store). I'm a big guy (6'4" and 250+) and was feeling a bit claustrophobic. Upstairs in that building (or perhaps it was the one immediately to the south) was their higher end stuff. Surveying equipment, and the more expensive stuff. That area at least had room to breath. All in all it was quite a surprise to me as they were one of the first places I made mail order purchases of tools from, back when they ran ads in every issue of Fine Woodworking. It's really a shame that those wood butchers who follow in our footsteps in coming years will be unlikely to experience stuff like this. It was a great experience though. On my last trip there I found a large box containing 48 metal boxes about 4"x6"x"4", nicely painted. I think I bought them for about $25. Drilled narrow end for some cheap wood knobs and damn, those suckers hold a ton of hardware. ;) That's the trouble with proprietorships--if they can't find a new proprietor they die. There was a place here that had any appliance part you wanted. Walked in there after dark last week to get a new inlet valve for the 40 year old Maytag and found that it was now a vape shop. Seems the owner died and there wasn't anybody else in the family willing to take over so they closed. |
The trip and Hartland Hardware !!!!!!
On Fri, 3 Jan 2020 15:21:21 -0800 (PST), DerbyDad03
wrote: On Friday, January 3, 2020 at 5:52:52 PM UTC-5, Unquestionably Confused wrote: On 1/2/2020 4:14 PM, Leon wrote: On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visited* Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away.* This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish.* Service was stellar. 7 Corners Ace was truly Mecca for the woodworker or tool junkie. Used to go up there to visit my daughter in grad school and would always make a stop at 7 Corners to browse and then go to the Italian Deli/Restaurant across the street to grab some lunch. If I went there, I'd eat first. Gotta keep your strength up while browsing the tool aisle. You might have to carry something out. ;-) Agreed. I might not have enough money to eat after. |
The trip and Hartland Hardware !!!!!!
On Fri, 3 Jan 2020 08:50:47 -0600, Leon lcb11211@swbelldotnet wrote:
On 1/2/2020 10:58 PM, wrote: On Thu, 2 Jan 2020 15:08:06 -0600, Leon lcb11211@swbelldotnet wrote: On 1/1/2020 1:32 PM, DerbyDad03 wrote: On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! LOL, I feel it was an obligation trip. ;~) But the new F150 was a dream..... My older ('13) F150 runs like a dream too but we took SWMBO's '19 Mustang to Vermont in October. Good thing because I had a seizure while we were there (day before we were supposed to leave) and she had to drive the entire trip home. I can't drive until mid-April, assuming nothing else happens. :-( :-( Well that sucks. ;~( So the dream part was the massaging seats, adaptive cruise control, and relatively good gas mileage. Hope your episode was a one time event. Yeah, it sucks big time but I'll get through it, as long as it is a one-time event. The Mustang gets surprisingly low gas mileage (under 30) but it is a heavy car for its size. Nice car, though. |
The trip and Hartland Hardware !!!!!!
On Saturday, January 4, 2020 at 12:51:39 AM UTC-5, wrote:
On Fri, 3 Jan 2020 08:50:47 -0600, Leon lcb11211@swbelldotnet wrote: On 1/2/2020 10:58 PM, wrote: On Thu, 2 Jan 2020 15:08:06 -0600, Leon lcb11211@swbelldotnet wrote: On 1/1/2020 1:32 PM, DerbyDad03 wrote: On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! LOL, I feel it was an obligation trip. ;~) But the new F150 was a dream..... My older ('13) F150 runs like a dream too but we took SWMBO's '19 Mustang to Vermont in October. Good thing because I had a seizure while we were there (day before we were supposed to leave) and she had to drive the entire trip home. I can't drive until mid-April, assuming nothing else happens. :-( :-( Well that sucks. ;~( So the dream part was the massaging seats, adaptive cruise control, and relatively good gas mileage. Hope your episode was a one time event. Yeah, it sucks big time but I'll get through it, as long as it is a one-time event. The Mustang gets surprisingly low gas mileage (under 30) but it is a heavy car for its size. Nice car, though. I have a friend that had a Mustang. Mid-teens I think, convertible. She was heading to Florida and was using a left lane entrance onto the highway. As she entered (top-down) she pulled alongside one of those flatbed trailers hauling a huge backhoe. There was a car in front of her, a car in back and no real shoulder to speak of. Suddenly the trailer started swaying and Bam! Bam! Bam! it hit her 3 times before she could speed up enough to get past it. She still doesn't know how she kept it on the road. She eventually got to a place where there was enough shoulder to pull onto. Turns out that there was a trooper behind the truck that saw the whole thing. She watched as the trooper pulled the truck over about a 1/4 mile ahead. The driver claimed that he had no idea that he had hit anything. The damage was extensive and she managed to talk the adjuster into totaling the vehicle. She said that the event had shaken her up so much that she'd never be able to drive the car again, especially with the top down. Seeing that huge backhoe looming over her head and swinging towards her scared the bejesus out of her. She never wanted to see the Mustang again. |
The trip and Hartland Hardware !!!!!!
On 1/3/2020 5:21 PM, DerbyDad03 wrote:
On Friday, January 3, 2020 at 5:52:52 PM UTC-5, Unquestionably Confused wrote: On 1/2/2020 4:14 PM, Leon wrote: On 1/2/2020 3:37 PM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: In case some of you have not seen or visitedÂ* Hartville Hardware, https://www.hartvillehardware.com/ Most of the good old hardware stores are going away.Â* This was one of my favorites when I was in the area: https://www.toolsofthetrade.net/powe...-in-business_o I actually ordered an out feed table from 7 Corners about 6 years ago. FWIW the Hartville hardware compound is owned by the Amish.Â* Service was stellar. 7 Corners Ace was truly Mecca for the woodworker or tool junkie. Used to go up there to visit my daughter in grad school and would always make a stop at 7 Corners to browse and then go to the Italian Deli/Restaurant across the street to grab some lunch. If I went there, I'd eat first. Gotta keep your strength up while browsing the tool aisle. You might have to carry something out. ;-) FWIW Hartville has a large restaurant in another building on the compound. |
The trip and Hartland Hardware !!!!!!
On 1/3/2020 11:51 PM, wrote:
On Fri, 3 Jan 2020 08:50:47 -0600, Leon lcb11211@swbelldotnet wrote: On 1/2/2020 10:58 PM, wrote: On Thu, 2 Jan 2020 15:08:06 -0600, Leon lcb11211@swbelldotnet wrote: On 1/1/2020 1:32 PM, DerbyDad03 wrote: On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! LOL, I feel it was an obligation trip. ;~) But the new F150 was a dream..... My older ('13) F150 runs like a dream too but we took SWMBO's '19 Mustang to Vermont in October. Good thing because I had a seizure while we were there (day before we were supposed to leave) and she had to drive the entire trip home. I can't drive until mid-April, assuming nothing else happens. :-( :-( Well that sucks. ;~( So the dream part was the massaging seats, adaptive cruise control, and relatively good gas mileage. Hope your episode was a one time event. Yeah, it sucks big time but I'll get through it, as long as it is a one-time event. The Mustang gets surprisingly low gas mileage (under 30) but it is a heavy car for its size. Nice car, though. With the 5.0 V8 and driving the speed limit, mostly 70 mph I got a legit 19 mpg. That is actual miles divided by gallons to fill. Not the inflated amount that the vehicle computer calculated. I heard that the Eco boost V6 gets worse gas mileage. Not enough cubic inches to hold 70 with out the turbo kicking in. |
The trip and Hartland Hardware !!!!!!
On Sat, 4 Jan 2020 09:45:45 -0600, Leon lcb11211@swbelldotnet wrote:
On 1/3/2020 11:51 PM, wrote: On Fri, 3 Jan 2020 08:50:47 -0600, Leon lcb11211@swbelldotnet wrote: On 1/2/2020 10:58 PM, wrote: On Thu, 2 Jan 2020 15:08:06 -0600, Leon lcb11211@swbelldotnet wrote: On 1/1/2020 1:32 PM, DerbyDad03 wrote: On Wednesday, January 1, 2020 at 2:16:48 PM UTC-5, Leon wrote: So.... my wife and I just got back from our "oblgation" trip, 12 days on the road. Day 1 From the Houston area we stopped in West Memphis AR. Day 2 On to Terra Haute IN. Day 3 On to Elkhart IN and stayed 3 nights. Visited the RV museum, train museum and my wife's brother and his family. Day 6 On to North Canton, OH. Stayed 3 nights and visited out daughter in-law's parents and brothers/ sisters, and nephew. AND We visited Hartville Hardware again. WOW this place is like 3 HD, Lowes and or Menards put together. The tool section beats any tool store that I have ever been in. They stock a pretty much complete line of Shaper Orion, Saw Stop, King, Festool, Jet, Rikon, Powermatic, Makita, Milwaukee, DeWalt, and probably a load of other brands of hand tools. To top it all of they have the longest extension ladder I have ever seen, 60 feet long and hanging from the ceiling all extended. Absolutely worth a look if you are in the Akron area. Day 9 On to Paduka KY. Day 10 On to Bentonville AR. Day 11 On to Piedmont OK. More relatives. Day 13 On to H O M E yeah!!!!! That concluded our 3477 mile trip. BTY we need Menards down here in Houston, Hartville Hardware is probably too much to hope for. :-) Happy New Year!!!!! 12 days, 3500 miles and more words about a hardware store than the rest of the entire trip. No doubt about where *your* interests lie. ;-) Glad you had fun. Happy New Year! LOL, I feel it was an obligation trip. ;~) But the new F150 was a dream..... My older ('13) F150 runs like a dream too but we took SWMBO's '19 Mustang to Vermont in October. Good thing because I had a seizure while we were there (day before we were supposed to leave) and she had to drive the entire trip home. I can't drive until mid-April, assuming nothing else happens. :-( :-( Well that sucks. ;~( So the dream part was the massaging seats, adaptive cruise control, and relatively good gas mileage. Hope your episode was a one time event. Yeah, it sucks big time but I'll get through it, as long as it is a one-time event. The Mustang gets surprisingly low gas mileage (under 30) but it is a heavy car for its size. Nice car, though. With the 5.0 V8 and driving the speed limit, mostly 70 mph I got a legit 19 mpg. That is actual miles divided by gallons to fill. Not the inflated amount that the vehicle computer calculated. My '13 F150 (same engine) gets between 18 and 19 at 70(ish). It's not too much different on the road or around town. I heard that the Eco boost V6 gets worse gas mileage. Not enough cubic inches to hold 70 with out the turbo kicking in. The Mustang has the 4cyl Eco boost with a 10-speed automatic transmission. |
| All times are GMT +1. The time now is 04:29 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter