Powermatic Cabinet Saw and Jointer
 

I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.

Powermatic Cabinet Saw and Jointer
 

On Mon, 21 Jan 2019 18:03:07 -0700, Bob La Londe
wrote:

I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Nice looking saw but I think the price is probably about right. I
might ask $1200, figuring to settle on $1000.

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.

But you *need* the better tools!

Powermatic Cabinet Saw and Jointer
 

On Monday, January 21, 2019 at 7:03:08 PM UTC-6, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819


Made in USA PM66 with Biesemeyer fence. And mobile base. And Forrest blade. And cast iron tenoning jig. Doesn't say if it is 3 or 5 HP motor. That might be a factor. I don't think a $1500 asking price would be wrong. Maybe take $1400. I think if you can get it for $1000, I'd sell/give away your contractor saw and take this one instead.






Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.

Powermatic Cabinet Saw and Jointer
 

wrote:
On Monday, January 21, 2019 at 7:03:08 PM UTC-6, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819


Made in USA PM66 with Biesemeyer fence. And mobile base. And Forrest blade. And cast iron tenoning jig. Doesn't say if it is 3 or 5 HP motor. That might be a factor. I don't think a $1500 asking price would be wrong. Maybe take $1400. I think if you can get it for $1000, I'd sell/give away your contractor saw and take this one instead.


FWIW, I thought $1500 would be a fair asking price too.

Powermatic Cabinet Saw and Jointer
 

On Tuesday, January 22, 2019 at 12:10:36 AM UTC-5, wrote:
On Monday, January 21, 2019 at 7:03:08 PM UTC-6, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819


Made in USA PM66 with Biesemeyer fence. And mobile base. And Forrest blade. And cast iron tenoning jig. Doesn't say if it is 3 or 5 HP motor. That might be a factor. I don't think a $1500 asking price would be wrong. Maybe take $1400. I think if you can get it for $1000, I'd sell/give away your contractor saw and take this one instead.



Perhaps the tenoning jig should not be included in determining the price. It's not an item
that every cares about or would want to pay for. It's like increasing the asking price of a car
because it comes with a really nice baby seat. Some might care, others not so much.

If the asking price is raised to $1500, then the listing should say "Free tenoning jig Included!" ;-)

Powermatic Cabinet Saw and Jointer
 

On 1/21/2019 7:03 PM, Bob La Londe wrote:
....

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.

As another said, for the still-made-in-TN PM, build an addition if need
to... :)

Until professional SawStop, there's nothing in the range that compares,
even Unisaurs

The jointer is a little less special than the Model 66, but larger table
is always nice.

--

Powermatic Cabinet Saw and Jointer
 

On 1/21/2019 8:25 PM, wrote:
On Mon, 21 Jan 2019 18:03:07 -0700, Bob La Londe
wrote:

I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Nice looking saw but I think the price is probably about right. I
might ask $1200, figuring to settle on $1000.

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.

But you *need* the better tools!


I mostly do metal working, but if I did much woodworking I'd have
certainly talked with her about them already. She also has a Powermatic
dust collector. I didn't link to. Figured if anybody was interested in
the saw or jointer they'd see the dust collector too.

Powermatic Cabinet Saw and Jointer
 

On 1/21/2019 6:03 PM, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale.Â* The saw has a bunch of extra
"stuff."Â* The saw and jointer didn't sell, btu they are nice pieces of
equipment.Â* I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.



I'm happy to report she didn't take an offer on the saw and sold it for
asking price. Woo! Hoo!

Powermatic Cabinet Saw and Jointer
 

On Wednesday, January 23, 2019 at 6:36:49 PM UTC-6, Bob La Londe wrote:
On 1/21/2019 6:03 PM, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale.Â* The saw has a bunch of extra
"stuff."Â* The saw and jointer didn't sell, btu they are nice pieces of
equipment.Â* I told her not to take any lowball offers at the garage sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.



I'm happy to report she didn't take an offer on the saw and sold it for
asking price. Woo! Hoo!

Its good she got the $1000 asking price. But I'm guessing the buyer was smiling the whole time he was loading/stealing the saw. It was several hundred dollars too low.

Powermatic Cabinet Saw and Jointer
 

wrote in message
...

On Wednesday, January 23, 2019 at 6:36:49 PM UTC-6, Bob La Londe wrote:
On 1/21/2019 6:03 PM, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage
sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.



I'm happy to report she didn't take an offer on the saw and sold it for
asking price. Woo! Hoo!

Its good she got the $1000 asking price. But I'm guessing the buyer was
smiling the whole time he was loading/stealing the saw. It was several
hundred dollars too low.

*********** Yeah I told her ask atleast 60% of new for a good used tool and
that saw sold for over 2 grand without all the extras.

Powermatic Cabinet Saw and Jointer
 

On Thu, 24 Jan 2019 08:01:51 -0700, "Bob La Londe"
wrote:



wrote in message
...

On Wednesday, January 23, 2019 at 6:36:49 PM UTC-6, Bob La Londe wrote:
On 1/21/2019 6:03 PM, Bob La Londe wrote:
I helped the lady who has these go through her husbands tools to
estimate price for a recent garage sale. The saw has a bunch of extra
"stuff." The saw and jointer didn't sell, btu they are nice pieces of
equipment. I told her not to take any lowball offers at the garage
sale.

Looking at the asking price on Craiglist list for similar equipment I
think she has her asking price set to low and I told her so, but she
does want to sell.

I didn't see them listed yet on the local Craigslist, but here is where
she has them listed on Facebook Marketplace.

Saw:
https://www.facebook.com/marketplace...39324676567819

Jointer:
https://www.facebook.com/marketplace...46709382477371

In Yuma, Az

I'd have made her an offer myself, but I just don't have room for the
additional equipment and I do already have a decent contractor table saw
and a smaller jointer.



I'm happy to report she didn't take an offer on the saw and sold it for
asking price. Woo! Hoo!

Its good she got the $1000 asking price. But I'm guessing the buyer was
smiling the whole time he was loading/stealing the saw. It was several
hundred dollars too low.

*********** Yeah I told her ask atleast 60% of new for a good used tool and
that saw sold for over 2 grand without all the extras.

I'm sure the $200 was worth it for her to be done with it,
particularly at a tough time like that.