Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default Making Plywood: Then vs. Now

Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com


  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 14,845
Default Making Plywood: Then vs. Now

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default Making Plywood: Then vs. Now

On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then

3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".
  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 14,845
Default Making Plywood: Then vs. Now

On Friday, January 4, 2019 at 11:41:40 PM UTC-5, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then

3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


I wonder how that came about...

1 - "Holy crap...there ain't no big logs left. We better improve the cutting
process."

or

2 - "We've improved the cutting process so much we can start using smaller
logs."
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default Making Plywood: Then vs. Now

On 1/4/19 10:41 PM, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then

3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


True, but they are fast growth, sustainable, forest trees.
More wood, faster than the old growth stuff.
Easier to harvest and transport, too.
Supposedly yields better grain and less variation in density, etc.
Plus, you're not cutting down 300 year old trees.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com




  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default Making Plywood: Then vs. Now

On Fri, 4 Jan 2019 23:01:52 -0600, -MIKE-
wrote:

On 1/4/19 10:41 PM, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then

3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


True, but they are fast growth, sustainable, forest trees.
More wood, faster than the old growth stuff.


True, but no "but". That's the whole point.

Easier to harvest and transport, too.
Supposedly yields better grain and less variation in density, etc.
Plus, you're not cutting down 300 year old trees.


Yep.
  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3,355
Default Making Plywood: Then vs. Now

-MIKE- on Fri, 4 Jan 2019 23:01:52 -0600 typed
in rec.woodworking the following:
On 1/4/19 10:41 PM, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then

3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


True, but they are fast growth, sustainable, forest trees.
More wood, faster than the old growth stuff.
Easier to harvest and transport, too.
Supposedly yields better grain and less variation in density, etc.


Unfortunately, not as strong as clear beams cut from old growth
timber.

Plus, you're not cutting down 300 year old trees.


I looked up Western Red Cedar, planning to plan a couple trees at
the old place. Very popular for decking, shingles, siding, etc. As I
recall, _minimum_ commercial size is 75 years. 100 years is better.
But they do tend to take up a lot of room. I figured, by that time, it
would not be my problem B-).

tschus
pyotr

--
pyotr filipivich
Next month's Panel: Graft - Boon or blessing?
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3,355
Default Making Plywood: Then vs. Now

DerbyDad03 on Fri, 4 Jan 2019 20:59:30 -0800
(PST) typed in rec.woodworking the following:
On Friday, January 4, 2019 at 11:41:40 PM UTC-5, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:
On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.
https://www.youtube.com/watch?v=eF5LVBW1vl8
Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then

3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


I wonder how that came about...

1 - "Holy crap...there ain't no big logs left. We better improve the cutting
process."

or

2 - "We've improved the cutting process so much we can start using smaller
logs."


Yes. When you start to run out of "easy to process" stock, you
start looking at ways to make do with the stock you have.

It was the recognition that they couldn't depend on "wild" trees
that lead Georgia Pacific, Weyerhaeuser, et al, to start farming their
own trees. And to start coming up with wood products from "lesser
trees"; e.G., making OSB, or using cottonwood or alder for "pulp".

Right now, there is a glut of pine in the South. Seems that 30
years ago, a lot of people planted pine trees as part of their
retirement plan. But when the trees became "ripe" twenty years later,
there was an economic downturn. Nobody wanted logs. Now, ten years
after, those trees are "too big" for the mills (which were optimized
for 20 year old trees, not the much bigger 30 year old trees.). So a
lot of people are selling "good lumber" trees for "pulp" or firewood.
Because there is no market for them as raw lumber.
--
pyotr filipivich
Next month's Panel: Graft - Boon or blessing?
  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default Making Plywood: Then vs. Now

On 1/5/19 12:53 PM, pyotr filipivich wrote:
-MIKE- on Fri, 4 Jan 2019 23:01:52 -0600 typed
in rec.woodworking the following:
On 1/4/19 10:41 PM, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then
3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


True, but they are fast growth, sustainable, forest trees.
More wood, faster than the old growth stuff.
Easier to harvest and transport, too.
Supposedly yields better grain and less variation in density, etc.


Unfortunately, not as strong as clear beams cut from old growth
timber.


Fortunately, they don't have to be as strong.
The stuff for construction that used to be solid lumber is now mostly
engineered lumber.


Plus, you're not cutting down 300 year old trees.


I looked up Western Red Cedar, planning to plan a couple trees at
the old place. Very popular for decking, shingles, siding, etc. As I
recall, _minimum_ commercial size is 75 years. 100 years is better.
But they do tend to take up a lot of room. I figured, by that time, it
would not be my problem B-).


I love the Western Red Cedar I used on my patio.
It's beautiful, a joy to work with, strong, aromatic, and did I mention,
beautiful? :-)
I wonder how old the tree was that gave it to me... hopefully, the patio
will be around as long or longer.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com


  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3,355
Default Making Plywood: Then vs. Now

-MIKE- on Sat, 5 Jan 2019 13:53:48 -0600 typed
in rec.woodworking the following:
On 1/5/19 12:53 PM, pyotr filipivich wrote:
-MIKE- on Fri, 4 Jan 2019 23:01:52 -0600 typed
in rec.woodworking the following:
On 1/4/19 10:41 PM, wrote:
On Thu, 3 Jan 2019 20:21:30 -0800 (PST), DerbyDad03
wrote:

On Thursday, January 3, 2019 at 10:06:22 PM UTC-5, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Not much other than...

1 - How many fewer people it takes now vs. then
2 - How many fewer chances to be killed or maimed now vs. then
3- How much smaller the useful logs are. The logs going into the
"now" are about the same size as the waste coming out of the "then".


True, but they are fast growth, sustainable, forest trees.
More wood, faster than the old growth stuff.
Easier to harvest and transport, too.
Supposedly yields better grain and less variation in density, etc.


Unfortunately, not as strong as clear beams cut from old growth
timber.


Fortunately, they don't have to be as strong.
The stuff for construction that used to be solid lumber is now mostly
engineered lumber.


Plus, you're not cutting down 300 year old trees.


I looked up Western Red Cedar, planning to plan a couple trees at
the old place. Very popular for decking, shingles, siding, etc. As I
recall, _minimum_ commercial size is 75 years. 100 years is better.
But they do tend to take up a lot of room. I figured, by that time, it
would not be my problem B-).


I love the Western Red Cedar I used on my patio.
It's beautiful, a joy to work with, strong, aromatic, and did I mention,
beautiful? :-)
I wonder how old the tree was that gave it to me... hopefully, the patio
will be around as long or longer.


I also found out that "Western Cedar" isn't a cedar, but a member
of the arborvitae family. "Cool".
--
pyotr filipivich
Next month's Panel: Graft - Boon or blessing?


  #11   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,013
Default Making Plywood: Then vs. Now

Nice memories. Northern Ca.
When I was a young man I'd go with Dad to hardware stores and such.
The local (town of 400) town had a lumber yard attached to the hardware
store and they
made plywood in the building behind. I could watch from the back dock
across a lot with
trucks moving and wood flying. It was some project. We bough lots of
ply there and most
were Marine type since they ran mostly Marine. Boat building... Some of
it lasts today.
He bought a nice belt sander and cut it all by hand saw.

Thanks for the nice video. The operation was like the first section -
but short cutting.
Martin

On 1/3/2019 9:06 PM, -MIKE- wrote:
Not much has changed.

https://www.youtube.com/watch?v=eF5LVBW1vl8


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boiler leak.. then another... then another Andrew Baker[_2_] UK diy 2 January 19th 13 10:55 AM
Mitsubishi CT-28AV1B LED flashes red then green then goes off and set dead kel-fbs Electronics Repair 4 November 8th 06 03:10 AM
Plasterboard then PVA then skim plaster? The Count UK diy 4 January 30th 06 12:27 AM
Attaching plywood to plywood for ceramic tile? Gord Home Repair 9 January 3rd 06 04:25 PM
Luan plywood vs. 1/4" birch plywood. blueman Woodworking 6 September 19th 05 03:08 AM


All times are GMT +1. The time now is 02:29 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"