plans for wooden chlothes hangers?
 

I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.
--
pyotr filipivich
TV NEWS: Yesterday's newspaper read to the illiterate.

plans for wooden chlothes hangers?
 

On Thursday, September 6, 2018 at 11:09:47 AM UTC-4, pyotr filipivich wrote:
I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



https://www.youtube.com/watch?v=rqwDM4L90Y4

Really, it's all in there. Use your hangers as a template and scale from that.

plans for wooden chlothes hangers?
 

DerbyDad03 on Thu, 6 Sep 2018 10:56:36 -0700
(PDT) typed in rec.woodworking the following:
On Thursday, September 6, 2018 at 11:09:47 AM UTC-4, pyotr filipivich wrote:
I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



https://www.youtube.com/watch?v=rqwDM4L90Y4

Really, it's all in there. Use your hangers as a template and scale from that.

Thanks. That is what I've been concluding.

Sigh - add to Project list.
--
pyotr filipivich
Next month's Panel: Graft - Boon or blessing?

plans for wooden chlothes hangers?
 

pyotr filipivich wrote in
:


I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.

If you think of a hanger as two pieces you'll get the basic idea: One at
a slight angle to hold the material and another in the center to hold the
first rod. Depending on your scale, you can use a lot of things for the
center: Fish hook earrings, fish hooks (file the barb and point off),
thin wire, etc.

As for the hangers themselves, just about any wood would work. I'd use
either balsa or basswood from the hobby shop, but good ol' pine would
work as well. Cut it thin and shave the pieces (or do it in reverse--
depends on you and your tools) until you get what you want. The hardest
part will be how to get the hook onto the hanger. (Most people won't
notice if you take a piece of copper wire and twist it around the outside
to attach the hook.)

Puckdropper
--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!

plans for wooden chlothes hangers?
 

Puckdropper on Thu, 06 Sep 2018 21:40:41 GMT
typed in rec.woodworking the following:
pyotr filipivich wrote in
:


I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.

If you think of a hanger as two pieces you'll get the basic idea: One at
a slight angle to hold the material and another in the center to hold the
first rod. Depending on your scale, you can use a lot of things for the
center: Fish hook earrings, fish hooks (file the barb and point off),
thin wire, etc.

As for the hangers themselves, just about any wood would work. I'd use
either balsa or basswood from the hobby shop, but good ol' pine would
work as well. Cut it thin and shave the pieces (or do it in reverse--
depends on you and your tools) until you get what you want. The hardest
part will be how to get the hook onto the hanger. (Most people won't
notice if you take a piece of copper wire and twist it around the outside
to attach the hook.)

Thanks. What I need is the shape.

What seems "simplest" is to make "halves" and fasten them
together.

It's all that curve and other stuff which has me frustrated. If I
had gotten to this sooner, I could have carved them out. But, like I
said "not perfect,Friday".
--
pyotr filipivich
Next month's Panel: Graft - Boon or blessing?

plans for wooden chlothes hangers?
 

On Thu, 06 Sep 2018 17:28:22 -0700, pyotr filipivich
wrote:

Puckdropper on Thu, 06 Sep 2018 21:40:41 GMT
typed in rec.woodworking the following:
pyotr filipivich wrote in
m:


I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.

If you think of a hanger as two pieces you'll get the basic idea: One at
a slight angle to hold the material and another in the center to hold the
first rod. Depending on your scale, you can use a lot of things for the
center: Fish hook earrings, fish hooks (file the barb and point off),
thin wire, etc.

As for the hangers themselves, just about any wood would work. I'd use
either balsa or basswood from the hobby shop, but good ol' pine would
work as well. Cut it thin and shave the pieces (or do it in reverse--
depends on you and your tools) until you get what you want. The hardest
part will be how to get the hook onto the hanger. (Most people won't
notice if you take a piece of copper wire and twist it around the outside
to attach the hook.)

Thanks. What I need is the shape.

What seems "simplest" is to make "halves" and fasten them
together.

It's all that curve and other stuff which has me frustrated. If I
had gotten to this sooner, I could have carved them out. But, like I
said "not perfect,Friday".

Saw it on "How they do it" made one cut for the shape then split the
blank in two halves, of course they had all the factory jigs. But
cutting the shape as a half both will be the same.

plans for wooden chlothes hangers?
 

On Friday, September 7, 2018 at 12:13:14 AM UTC-4, Markem wrote:
On Thu, 06 Sep 2018 17:28:22 -0700, pyotr filipivich
wrote:

Puckdropper on Thu, 06 Sep 2018 21:40:41 GMT
typed in rec.woodworking the following:
pyotr filipivich wrote in
m:


I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.

If you think of a hanger as two pieces you'll get the basic idea: One at
a slight angle to hold the material and another in the center to hold the
first rod. Depending on your scale, you can use a lot of things for the
center: Fish hook earrings, fish hooks (file the barb and point off),
thin wire, etc.

As for the hangers themselves, just about any wood would work. I'd use
either balsa or basswood from the hobby shop, but good ol' pine woutld
work as well. Cut it thin and shave the pieces (or do it in reverse--
depends on you and your tools) until you get what you want. The hardest
part will be how to get the hook onto the hanger. (Most people won't
notice if you take a piece of copper wire and twist it around the outside
to attach the hook.)

Thanks. What I need is the shape.

What seems "simplest" is to make "halves" and fasten them
together.

It's all that curve and other stuff which has me frustrated. If I
had gotten to this sooner, I could have carved them out. But, like I
said "not perfect,Friday".

Saw it on "How they do it" made one cut for the shape then split the
blank in two halves, of course they had all the factory jigs. But
cutting the shape as a half both will be the same.

Actually, it was "How It"s Made".

I posted the YouTube link earlier. (first response)

plans for wooden chlothes hangers?
 

pyotr filipivich wrote:

I realize I should have asked about this months ago, but I have
been tasked with making clothing stands for small sized clothing. I
keep looking at the wooden hangers which came with my suit, but those
are full sized (naturally).
So I'm wondering if anyone has plans or ideas where plans could be
found. Full size or otherwise, I can scale.

No rush, I have till next Saturday to have them finished 8-)

tschus
pyotr



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.

https://www.youtube.com/watch?v=qwKuAVUbuoo

How many?... how "small" ?

https://www.containerstore.com/s/clo...uctId=11003036

https://www.nahanco.com/hangers/wood...al-finish.html

plans for wooden chlothes hangers?
 

Spalted Walt on Fri, 07 Sep 2018 15:05:26
+0000 typed in rec.woodworking the following:



pp.S., I picked up a book on model furniture making. Looking at one
of the pieces, I said "I want one of those", and scaled up. Well, not
the thickness, that scaled up to 1.5 inches thick for a shelf. Too
much.

https://www.youtube.com/watch?v=qwKuAVUbuoo

IF I had a bandsaw, this would be obvious.

How many?... how "small" ?

Six. about "half" scale. "About so wide".


--
pyotr filipivich
Next month's Panel: Graft - Boon or blessing?

Best Buy Flooring Center
 

DIY hanging clothes rack has a perfect solution for that. To build with a few basic tools, can be moved anywhere, and takes up very little space. That’s because it’s made up of just two side legs with a support shelf and hanging rod in between.