Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html
This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP |
#2
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On Sun, 6 May 2018 16:31:52 -0700 (PDT), JayPique
wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. If the blade isn't making a dead square and parallel, then a sanding disk on the same machine isn't likely to do any better. On the other hand, if you need a disk sander and are willing to put up with changing out the blade for a sanding disk every time you need to sand something, this sort of setup works. |
#3
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
If the blade isn't making a dead square and parallel, then a sanding disk on the same machine isn't likely to do any better. Agreed. And I think you have to tilt the blade slightly for it to work properly, so you'll need to check for square. On the other hand, if you need a disk sander and are willing to put up with changing out the blade for a sanding disk every time you need to sand something, this sort of setup works. This is really only a "disc sander" in the sense that it's disc-shaped. In my mind they serve different functions. To me this is really an edge sander. JP |
#4
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On Sun, 6 May 2018 16:31:52 -0700 (PDT), JayPique wrote:
Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP https://www.woodcraft.com/products/w...mounting-plate http://www.acmetools.com/shop/tools/freud-cd010 |
#5
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On Sunday, May 6, 2018 at 8:59:07 PM UTC-4, Spalted Walt wrote:
On Sun, 6 May 2018 16:31:52 -0700 (PDT), JayPique wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP https://www.woodcraft.com/products/w...mounting-plate http://www.acmetools.com/shop/tools/freud-cd010 Those appear to be flat discs - for use as a disc sander. I'm interested in the ones made specifically to sand an edge - they have about a 3 degree bevel to the sanding surface, which you then square up to the table of your TS. It looks like Woodtek has one. I was wondering if the Edgetech one was better. -JP |
#6
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/6/2018 6:31 PM, JayPique wrote:
Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP A solution for a problem with technique. With a properly set up saw and a good blade the most you should need to clean up an edge would be to simply make a pass or two with a scraper or lite hand sanding. If you are taking off 1/32 you would surely wear out the sand paper rather quickly. |
#7
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On Monday, May 7, 2018 at 10:46:24 AM UTC-4, Leon wrote:
On 5/6/2018 6:31 PM, JayPique wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP A solution for a problem with technique. With a properly set up saw and a good blade the most you should need to clean up an edge would be to simply make a pass or two with a scraper or lite hand sanding. If you are taking off 1/32 you would surely wear out the sand paper rather quickly. So you've never used one, Leon? |
#8
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/7/2018 9:16 PM, JayPique wrote:
On Monday, May 7, 2018 at 10:46:24 AM UTC-4, Leon wrote: On 5/6/2018 6:31 PM, JayPique wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP A solution for a problem with technique. With a properly set up saw and a good blade the most you should need to clean up an edge would be to simply make a pass or two with a scraper or lite hand sanding. If you are taking off 1/32 you would surely wear out the sand paper rather quickly. So you've never used one, Leon? Never. I have seen them come and go over the past 30 years. Interest renews and they show up again. |
#9
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/7/2018 9:16 PM, JayPique wrote:
On Monday, May 7, 2018 at 10:46:24 AM UTC-4, Leon wrote: On 5/6/2018 6:31 PM, JayPique wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP A solution for a problem with technique. With a properly set up saw and a good blade the most you should need to clean up an edge would be to simply make a pass or two with a scraper or lite hand sanding. If you are taking off 1/32 you would surely wear out the sand paper rather quickly. So you've never used one, Leon? Many grits are offered, seems that you will be changing paper to get rid of the coarse sanding marks. Start with a finer grit and you will likely burn the wood. |
#10
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/6/2018 7:52 PM, J. Clarke wrote:
On Sun, 6 May 2018 16:31:52 -0700 (PDT), JayPique wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. If the blade isn't making a dead square and parallel, then a sanding disk on the same machine isn't likely to do any better. Many years ago, before I had a disk/belt sander and before dust collection, I made a plywood disk for the TS and attached sandpaper to it. It worked, but the TS is the wrong tool, it turns way too fast and created a huge amount of dust, and tended to burn the wood due to speed of TS. You would need really good DC on the saw, both top and bottom. My experiment led to immediate purchase of a 48" belt/disc sander combo. The disk is one of my most used tools, and would hate changing the TS Blade out every time is used it, even if it did work well, which it doesn't. I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges. IMO, if you aren't getting good edges off the TS, you need to tune up the saw... -- Jack Experience is what you get when you were expecting something else. http://jbstein.com |
#11
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
Jay Pique wrote:
On Sunday, May 6, 2018 at 8:59:07 PM UTC-4, Spalted Walt wrote: On Sun, 6 May 2018 16:31:52 -0700 (PDT), JayPique wrote: Has anyone used one of these? I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me. Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts? The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. JP https://www.woodcraft.com/products/w...mounting-plate http://www.acmetools.com/shop/tools/freud-cd010 Those appear to be flat discs - for use as a disc sander. I'm interested in the ones made specifically to sand an edge - they have about a 3 degree bevel to the sanding surface, which you then square up to the table of your TS. It looks like Woodtek has one. I was wondering if the Edgetech one was better. -JP What is the URL of this elusive video you mentioned: "he showed me a video of a guy using one" ? There are several 'flat' TS sanding disc vids on YT. I didn't find any (table saw); tapered, conical, or convex sanding disc videos. Master box maker, Doug Stowe, uses a TS tapered disc to 'thickness' sand small parts: https://tinyurl.com/doug-stowe-tapered-disc ....as does this luthier: http://www.moonlightluthiers.com/conesander.htm FWIW, Shopsmith offers a 'Conical Sanding Disc' as well http://www.shopsmith.com/ownersite/c...al_sanding.htm |
#12
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/8/2018 7:30 AM, Jack wrote:
On 5/6/2018 7:52 PM, J. Clarke wrote: On Sun, 6 May 2018 16:31:52 -0700 (PDT), JayPique wrote: Has anyone used one of these?* I was helping a buddy this weekend and he showed me a video of a guy using one, but I can't find much info - this is about it... https://www.wurthlac.com/storefront/...c/prodET2.html This really seems like a superior way to edge sand, to me.* Leave each edge say a 32nd oversize and sand it dead square and parallel. There is a similar product here... https://woodworker.com/cgi-bin/FULLP...PARTNUM=95-430 Thoughts?* The Woodtek one is $37 and discs are $7 each - you have to set up an account to see the actual Edgetech price. If the blade isn't making a dead square and parallel, then a sanding disk on the same machine isn't likely to do any better. Many years ago, before I had a disk/belt sander and before dust collection,* I made a plywood disk for the TS and attached sandpaper to it.* It worked, but the TS is the wrong tool, it turns way too fast and created a huge amount of dust, and tended to burn the wood due to speed of TS.* You would need really good DC on the saw, both top and bottom. My experiment led to immediate purchase of a 48" belt/disc sander combo. The disk is one of my most used tools, and would hate changing the TS Blade out every time is used it, even if it did work well, which it doesn't. I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges.* IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 |
#13
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
Leon lcb11211@swbelldotnet writes:
On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges.* IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. |
#14
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/9/2018 9:52 AM, Scott Lurndal wrote:
Leon lcb11211@swbelldotnet writes: On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges.Â* IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. I guess. While I will agree that the disk sander will form "a" good miter, like a 45 miter, IMHO using one to do so is like using a jointer to resurface all sides of a rough cut board. It will look good but will you end up with the exact measurements? My TS and miter saw deliver expected length cuts and exceptional fitting miter joints. BUT if the disk sander had a jig or setup to guarantee exact length results it would work better than with out. My experience is that a tool should be equipped with a fixed reference to insure precise results, ie. a surface planer bed, TS rip fence, TS miter gauge fence stops. |
#15
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
Leon lcb11211@swbelldotnet writes:
On 5/9/2018 9:52 AM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges.Â* IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. I guess. While I will agree that the disk sander will form "a" good miter, like a 45 miter, IMHO using one to do so is like using a jointer to resurface all sides of a rough cut board. It will look good but will you end up with the exact measurements? My TS and miter saw deliver expected length cuts and exceptional fitting miter joints. BUT if the disk sander had a jig or setup to guarantee exact length results it would work better than with out. My experience is that a tool should be equipped with a fixed reference to insure precise results, ie. a surface planer bed, TS rip fence, TS miter gauge fence stops. Oh, indeed. A jig/fence is required. I don't use it to form the miter, just to clean it up a bit and maybe nudge it a bit towards true if the stock wasn't held tight against the SCMS fence. |
#16
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
What is the URL of this elusive video you mentioned: "he showed me a video of a guy using one" ? https://www.youtube.com/watch?v=I8rVyWemSsw 6 minutes in. |
#17
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/9/2018 10:52 AM, Scott Lurndal wrote:
Leon lcb11211@swbelldotnet writes: On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges. IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. I've used it on miter joints more than once, but I don't think I'd call it the "bees knees". If your saw is set up correctly, you generally have no need for a disc sander to fix miter joint problems. The main secret to TS miters is preventing the wood from sliding when cutting, so sandpaper on the fence of your perfectly made miter saw table is a good idea. -- Jack The older I get the meaner I get. I'm pretty sure soon I'll be biting people... http://jbstein.com |
#18
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
Jack writes:
On 5/9/2018 10:52 AM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges. IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. I've used it on miter joints more than once, but I don't think I'd call it the "bees knees". If your saw is set up correctly, you generally have no need for a disc sander to fix miter joint problems. The main secret to TS miters is preventing the wood from sliding when cutting, so sandpaper on the fence of your perfectly made miter saw table is a good idea. Personally, I cut a lot of miters with my H.C. Marsh miter vise (subsequently sold by Stanley as the #100 miter machine https://www.ebay.com/i/123109187472) and a backsaw. So cleaning up the cut on the disc sander works well. "perfectly made miter saw table" sounds expensive :-). My 25yo Delta chopsaw isn't perfect by any stretch of anyone's imagination, but works well when building fences and doing construction (nowadays I keep an abrasive blade in it for cutting unistrut and EMT). |
#19
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/9/2018 12:28 PM, Scott Lurndal wrote:
Leon lcb11211@swbelldotnet writes: On 5/9/2018 9:52 AM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges.ÂÂ* IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. I guess. While I will agree that the disk sander will form "a" good miter, like a 45 miter, IMHO using one to do so is like using a jointer to resurface all sides of a rough cut board. It will look good but will you end up with the exact measurements? My TS and miter saw deliver expected length cuts and exceptional fitting miter joints. BUT if the disk sander had a jig or setup to guarantee exact length results it would work better than with out. My experience is that a tool should be equipped with a fixed reference to insure precise results, ie. a surface planer bed, TS rip fence, TS miter gauge fence stops. Oh, indeed. A jig/fence is required. I don't use it to form the miter, just to clean it up a bit and maybe nudge it a bit towards true if the stock wasn't held tight against the SCMS fence. Got'cha! ;~) Sneaking up on a perfect fit. It will do that for sure. |
#20
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On 5/10/2018 10:05 AM, Scott Lurndal wrote:
Jack writes: On 5/9/2018 10:52 AM, Scott Lurndal wrote: Leon lcb11211@swbelldotnet writes: On 5/8/2018 7:30 AM, Jack wrote: I never used the one mentioned here, but I don't think a disk sander is any where near as good as a TS in getting dead square and parallel edges. Disk sanders are good at sanding curved edges. IMO, if you aren't getting good edges off the TS, you need to tune up the saw... +1 OTOH, disc sanders are the bees knees for miter joints, not just curved edges. I've used it on miter joints more than once, but I don't think I'd call it the "bees knees". If your saw is set up correctly, you generally have no need for a disc sander to fix miter joint problems. The main secret to TS miters is preventing the wood from sliding when cutting, so sandpaper on the fence of your perfectly made miter saw table is a good idea. Personally, I cut a lot of miters with my H.C. Marsh miter vise (subsequently sold by Stanley as the #100 miter machine https://www.ebay.com/i/123109187472) and a backsaw. So cleaning up the cut on the disc sander works well. I can see that. On a TS however, generally no reason to use a disk sander, particularly a disk sander on a TS. "perfectly made miter saw table" sounds expensive :-). I should have put that in quotes, and included "homemade". It was meant as a light reference to another thread about making miter tables for the TS. They are super easy to make and about guarantee perfect miters every time, and cost almost nothing but a small amount of time to construct. Miter joints in my cabinet shop are not used that often. I made the "perfectly made miter sled" when I was making lots of picture frames, which is where 99% of my miter joints are used in my shop. My 25yo Delta chopsaw isn't perfect by any stretch of anyone's imagination, but works well when building fences and doing construction (nowadays I keep an abrasive blade in it for cutting unistrut and EMT). I don't own a chop saw. I considered buying one once when I did more carpentry work than I do now. When I built my shed with a gambrel roof I borrowed one which made things easier, but other than that, I just used a plane old CS to cut up construction wood for decks, steps porches, sheds etc. -- Jack Tolerance is the virtue of the man without convictions. http://jbstein.com |
#21
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
Can anyone find this disc for sale on the internet? the links in this group does not sell it anymore. Thanks
|
#22
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
|
#23
Posted to rec.woodworking
|
|||
|
|||
Edgetech Disc sand for TS
On Thursday, July 9, 2020 at 6:42:26 AM UTC-4, J. Clarke wrote:
On Wed, 8 Jul 2020 23:07:33 -0700 (PDT), wrote: Can anyone find this disc for sale on the internet? the links in this group does not sell it anymore. Thanks The second hit on Google is the manufacturer. Have you asked them where to buy? I called the woodworker.com website and they only sell the sanding pads, not the woodtek aluminum disk itself. I did find the Edge tech II, which is still being sold, but the 10" is $95 and they are located in CA. I'm going to order the edgetech II. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
silver sand, plasterers' sand, children's sand, etc | UK diy | |||
Stationary Disc Sander - Shopsmith Steel Disc Good Enough to Use? | Woodworking | |||
Stationary Disc Sander - Shopsmith Steel Disc Good Enough toUse? | Woodworking | |||
"Disc Cannot Be Played... Please Check The Disc"? | Electronics Repair | |||
sony 200 disc changer doesn't see disc | Electronics Repair |