Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
Hello all, I have a staining question.
I have a maple bar rail that I recently installed, and I'm having a staining issue. After gluing it together and mounting it to the bar top, I finished sanded it to 400 grit. When I stained it, the curve section of the bar was much darker than the rest of the bar, but I could live with it. When I used a polyurethane top coat a day later, it ended up having a goop-ing effect that I then sanded down. I ended up sanding down the bar back to the wood (400 grit), and re-stained again. Now it's even lighter than before. What can I do? Should I use a higher grit? multiple applications don't seem to matter. |
#2
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
|
#3
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
I stop sanding at 150, and yeah, maple's a bitch. I use a spray/wipe/spray process where I flood the piece, wait 60 seconds, then wipe all the excess away and let dry. The second spray is a light coat for colour.
Hate to say it, but I would strip the rail completely, sand 80 - 120 - 150 then re-stain. While I don't usually use a conditioner, that particular piece of wood might call for it.. |
#4
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
|
#6
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
On 3/16/2018 10:27 PM, Doug Miller wrote:
wrote in : On Wed, 14 Mar 2018 15:44:33 -0700 (PDT), wrote: I stop sanding at 150, and yeah, maple's a bitch. I use a spray/wipe/spray process where I flood the piece, wait 60 seconds, then wipe all the excess away and let dry. The second spray is a light coat for colour. Gel stains help some, too. Or dyes. Maple is notoriously difficult to stain. I have a question. I have only used dyes on a couple of projects, on white oak. I needed deep dark. Anyway, have you used dyes on maple? Is that the solution? A friend built a maple table for a customer and sanded, stained, varnished and sanded to bare wood 3.5 times. It never looked bad until he varnished. Ultimately he bought a better sander and that solved half of his issues. Hate to say it, but I would strip the rail completely, sand 80 - 120 - 150 then re-stain. While I don't usually use a conditioner, that particular piece of wood might call for it.. |
#7
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
Leon lcb11211@swbelldotnet wrote in
: On 3/16/2018 10:27 PM, Doug Miller wrote: wrote in : On Wed, 14 Mar 2018 15:44:33 -0700 (PDT), wrote: I stop sanding at 150, and yeah, maple's a bitch. I use a spray/wipe/spray process where I flood the piece, wait 60 seconds, then wipe all the excess away and let dry. The second spray is a light coat for colour. Gel stains help some, too. Or dyes. Maple is notoriously difficult to stain. I have a question. I have only used dyes on a couple of projects, on white oak. I needed deep dark. Anyway, have you used dyes on maple? Is that the solution? Once, anyway. I'm no expert. I'd rather just varnish or oil it. A friend built a maple table for a customer and sanded, stained, varnished and sanded to bare wood 3.5 times. It never looked bad until he varnished. Ultimately he bought a better sander and that solved half of his issues. |
#8
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
Doug Miller wrote:
Leon lcb11211@swbelldotnet wrote in : On 3/16/2018 10:27 PM, Doug Miller wrote: wrote in : On Wed, 14 Mar 2018 15:44:33 -0700 (PDT), wrote: I stop sanding at 150, and yeah, maple's a bitch. I use a spray/wipe/spray process where I flood the piece, wait 60 seconds, then wipe all the excess away and let dry. The second spray is a light coat for colour. Gel stains help some, too. Or dyes. Maple is notoriously difficult to stain. I have a question. I have only used dyes on a couple of projects, on white oak. I needed deep dark. Anyway, have you used dyes on maple? Is that the solution? Once, anyway. I'm no expert. I'd rather just varnish or oil it. I to try not to stain. :-) |
#9
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
On 3/24/2018 12:16 AM, Leon wrote:
Gel stains help some, too. Or dyes. Maple is notoriously difficult to stain. I have a question. I have only used dyes on a couple of projects, on white oak. I needed deep dark. Anyway, have you used dyes on maple? Is that the solution? Once, anyway. I'm no expert. I'd rather just varnish or oil it. I to try not to stain. :-) Same here. Good latex paint covers in one coat. |
#10
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
On 3/24/2018 8:50 AM, Ed Pawlowski wrote:
On 3/24/2018 12:16 AM, Leon wrote: Gel stains help some, too. Or dyes. Maple is notoriously difficult to stain. I have a question.Â* I have only used dyes on a couple of projects, on white oak.Â* I needed deep dark. Anyway, have you used dyes on maple?Â* Is that the solution? Once, anyway. I'm no expert. I'd rather just varnish or oil it. I to try not to stain. :-) Same here.Â* Good latex paint covers in one coat. Sure does! ;~) |
#11
Posted to rec.woodworking
|
|||
|
|||
Staining Maple Issue
On Sat, 24 Mar 2018 15:26:40 -0500, Leon lcb11211@swbelldotnet
wrote: On 3/24/2018 8:50 AM, Ed Pawlowski wrote: On 3/24/2018 12:16 AM, Leon wrote: Gel stains help some, too. Or dyes. Maple is notoriously difficult to stain. I have a question.* I have only used dyes on a couple of projects, on white oak.* I needed deep dark. Anyway, have you used dyes on maple?* Is that the solution? Once, anyway. I'm no expert. I'd rather just varnish or oil it. I to try not to stain. :-) Same here.* Good latex paint covers in one coat. Sure does! ;~) Easy cleanup, too. What's not to like? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
maple story news,maple story gold,maple story money | Woodworking | |||
maple story news,maple story gold,maple story money | Woodworking | |||
Staining maple for amateurs | Woodworking | |||
Dyeing/Staining Maple | Woodworking | |||
Maintaining curly maple curl while staining | Woodworking |