Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,349
Default Eliminate 'splinters'

What have I got myself into?

Long story short: Bear broke into my shed. Wrecked door. I replaced
door. Basic sheet of 3/4" plywood, bordered by 1x4's (?,
1-3/8"X3/4"). I did not paint them.

Now, couple yrs later, I'm getting a lotta 'splinters' from the 1X4's.
Should I paint?, sand?, replace wood?, all the above? I'm not real
experienced, but willing to learn.

nb
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 14,845
Default Eliminate 'splinters'

On Saturday, November 11, 2017 at 12:38:15 PM UTC-5, notbob wrote:
What have I got myself into?

Long story short: Bear broke into my shed. Wrecked door. I replaced
door. Basic sheet of 3/4" plywood, bordered by 1x4's (?,
1-3/8"X3/4"). I did not paint them.

Now, couple yrs later, I'm getting a lotta 'splinters' from the 1X4's.
Should I paint?, sand?, replace wood?, all the above? I'm not real
experienced, but willing to learn.

nb


Learn to wear gloves.

  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 39
Default Eliminate 'splinters'

notbob wrote:
What have I got myself into?

Long story short: Bear broke into my shed. Wrecked door. I replaced
door. Basic sheet of 3/4" plywood, bordered by 1x4's (?,
1-3/8"X3/4"). I did not paint them.

Now, couple yrs later, I'm getting a lotta 'splinters' from the 1X4's.
Should I paint?, sand?, replace wood?, all the above? I'm not real
experienced, but willing to learn.

nb



Just curious, did you use pressure treated lumber? I'm wondering whether
the choice of wood that was used was suitable, but I have no experience
to offer.

Bill
  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 493
Default Eliminate 'splinters'

replying to notbob, Iggy wrote:
Yep, sand, prime and paint or replace and then prime and paint will do it. Or,
you can replace the 1x4's with PVC or Composite lumber, which doesn't require
any treatment.

--
for full context, visit https://www.homeownershub.com/woodwo...rs-812090-.htm


  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,349
Default Eliminate 'splinters'

On 2017-11-11, Bill wrote:

Just curious, did you use pressure treated lumber?


No.

I'm wondering whether the choice of wood that was used was suitable,
but I have no experience to offer.


Thanks fer the attempt.

I was wondering the same thing. I jes bought the cheapest 1X4's
(3-3/8"X3/4") I could afford and screwed them to the 3/4" plywood.
Not elegant, but effective.

The splinters are small, but deep. I got out 2/3rds of the first one,
jes let the reamaining 1/3 go. I'm starting to do the same with this
last splinter. Screw it, it's in deep and doesn't hurt, too bad. In
the future, I'll start wearing gloves when dealing with that
particular door. 8|

nb


  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,349
Default Eliminate 'splinters'

On 2017-11-11, Iggy m wrote:

replying to notbob, Iggy wrote:


Yep, sand, prime and paint or replace and then prime and paint will do it.


Tnank you. Kinda figured that might be the answer.

Fortunately, I'll be painting/re-painting the entire abode, next
Spring. Probably a lotta questions, forthcoming, till then.

nb
  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 39
Default Eliminate 'splinters'

notbob wrote:
On 2017-11-11, Iggy m wrote:

replying to notbob, Iggy wrote:
Yep, sand, prime and paint or replace and then prime and paint will do it.

Tnank you. Kinda figured that might be the answer.

Fortunately, I'll be painting/re-painting the entire abode, next
Spring. Probably a lotta questions, forthcoming, till then.

nb


Replace the 1"x4" wood with treated wood now, and perhaps it will be
more ready to take the primer and paint in the spring. hth.

Bill

  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,349
Default Eliminate 'splinters'

On 2017-11-12, Bill wrote:

Replace the 1"x4" wood with treated wood now, and perhaps it will be
more ready to take the primer and paint in the spring. hth.


O.K. Thanks, Bill. I'll check prices ....and my finances.

nb
  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 11,640
Default Eliminate 'splinters'

On 11/11/2017 3:44 PM, Iggy wrote:
replying to notbob, Iggy wrote:
Yep, sand, prime and paint or replace and then prime and paint will do
it. Or,
you can replace the 1x4's with PVC or Composite lumber, which doesn't
require
any treatment.


I thought you didn't like that stuff? You told me how bad it was for
window trim.
  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default Eliminate 'splinters'

On 11 Nov 2017 17:38:09 GMT
notbob wrote:

Now, couple yrs later, I'm getting a lotta 'splinters' from the 1X4's.
Should I paint?, sand?, replace wood?, all the above? I'm not real
experienced, but willing to learn.


entice the bear back
let him or her get the splinters

replace the door
sand the door
prime the door
paint the door
optional maybe shoot the bear but depends on how good the door and
paint are because you may need the bear again later for door removal


of course if the bear eats you then no worries

thing to learn here since you have the thirst is that there are
always options










  #11   Report Post  
Posted to rec.woodworking
Roy Roy is offline
external usenet poster
 
Posts: 240
Default Eliminate 'splinters'

On Tue, 14 Nov 2017 13:20:14 -0800, Electric Comet
wrote:

On 11 Nov 2017 17:38:09 GMT
notbob wrote:

Now, couple yrs later, I'm getting a lotta 'splinters' from the 1X4's.
Should I paint?, sand?, replace wood?, all the above? I'm not real
experienced, but willing to learn.


entice the bear back
let him or her get the splinters

replace the door
sand the door
prime the door
paint the door
optional maybe shoot the bear but depends on how good the door and
paint are because you may need the bear again later for door removal


of course if the bear eats you then no worries

thing to learn here since you have the thirst is that there are
always options


Call my neighbor. They took a 500 pound black bear off the mountain behind our
houses last bear season.
  #12   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,349
Default Eliminate 'splinters'

On 2017-11-18, Roy wrote:

entice the bear back
let him or her get the splinters


LOL....

It was the bear's 2nd offense. They caught him and put him down. 8|

nb
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Teak garden table splinters boarderX UK diy 16 April 16th 17 06:28 PM
Answer: Removing metal splinters... John Doe Metalworking 10 October 21st 07 01:00 AM
Answer: Removing metal splinters... Wild_Bill Metalworking 1 October 18th 07 11:58 PM
Answer: Removing metal splinters... Wild_Bill Metalworking 0 October 18th 07 12:50 PM
Super-powered Splinters Jay Pique Woodworking 23 August 12th 06 11:46 AM


All times are GMT +1. The time now is 01:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"