DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Covering patches over a non-stainable wood filler (https://www.diybanter.com/woodworking/592016-covering-patches-over-non-stainable-wood-filler.html)

Sharon[_3_] June 17th 17 10:14 PM

Covering patches over a non-stainable wood filler
 
I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged. I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?

--
for full context, visit https://www.homeownershub.com/woodwo...er-809411-.htm



[email protected] June 18th 17 02:19 AM

Covering patches over a non-stainable wood filler
 
On Sat, 17 Jun 2017 21:14:02 GMT, Sharon
m wrote:

I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged.


Did you dust the holes before filling them? Likely, the reason the
woodpeckers were going after the wood was that they could hear bees in
the wood. If you didn't dust for the bees, the next brood will hatch
next spring and tunnel their way out. ...and the cycle repeats.

Carpenter bees are a RPITA. Our last house had exposed (fake) beam
ends. The bees _loved_ them. I had to have exterminators out every
spring to dust and fill the holes.

I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?


Chisel out the filler and start over? Paint?

Bobby[_5_] June 18th 17 03:44 AM

Covering patches over a non-stainable wood filler
 
replying to Sharon, Bobby wrote:
What kind of wood? How dark is the stain? Doubt you can make them blend
completely but a paint may blend thim much better than what you have now.

--
for full context, visit https://www.homeownershub.com/woodwo...er-809411-.htm



Spalted Walt June 18th 17 02:10 PM

Covering patches over a non-stainable wood filler
 
Sharon m wrote:

I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged. I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?


An ounce of prevention is worth a ton of cu
https://www.youtube.com/watch?v=3RHtEOQj4yo
https://www.youtube.com/results?sear...enter+bee+trap

If that is beyond your skill set:
http://ebay.to/2sGQ1X9
https://www.amazon.com/dp/B01A9GOTTM/
https://www.amazon.com/dp/B06XGGWWB7/
https://www.youtube.com/watch?v=TRoKgVQEjLQ


Leon[_5_] June 18th 17 02:43 PM

Covering patches over a non-stainable wood filler
 
Sharon m wrote:
I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged. I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?


Paint.


J. Clarke[_4_] June 18th 17 05:02 PM

Covering patches over a non-stainable wood filler
 
In article ,
says...

Sharon m wrote:

I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged. I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?


An ounce of prevention is worth a ton of cu
https://www.youtube.com/watch?v=3RHtEOQj4yo
https://www.youtube.com/results?sear...enter+bee+trap

If that is beyond your skill set:
http://ebay.to/2sGQ1X9
https://www.amazon.com/dp/B01A9GOTTM/
https://www.amazon.com/dp/B06XGGWWB7/
https://www.youtube.com/watch?v=TRoKgVQEjLQ


He wasn't asking about bees, he was asking for finishing advice.


Spalted Walt June 18th 17 05:46 PM

Covering patches over a non-stainable wood filler
 
"J. Clarke" wrote:

In article ,
says...

Sharon m wrote:

I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged. I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?


An ounce of prevention is worth a ton of cu
https://www.youtube.com/watch?v=3RHtEOQj4yo
https://www.youtube.com/results?sear...enter+bee+trap

If that is beyond your skill set:
http://ebay.to/2sGQ1X9
https://www.amazon.com/dp/B01A9GOTTM/
https://www.amazon.com/dp/B06XGGWWB7/
https://www.youtube.com/watch?v=TRoKgVQEjLQ


He wasn't asking about bees, he was asking for finishing advice.


She got lucky. It's bonus reply SUNDAY!
now run along and... http://i.imgur.com/Fvfh8sY.gif


J. Clarke[_4_] June 18th 17 06:01 PM

Covering patches over a non-stainable wood filler
 
In article ,
says...

"J. Clarke" wrote:

In article ,
says...

Sharon m wrote:

I successfully (I thin) got rid of carpenter bees, only to find that
woodpeckers took their place., but the holes were now long and gouged. I
filled the holes with a filler, then sanded them, and then I started to stain
them. The stain would not work, and then, way too late in the day of course, I
read the directions on the wood filler, which stated 'non-stainable'. My
question is what can I use to cover, or get rid of those unstainable patches?

An ounce of prevention is worth a ton of cu
https://www.youtube.com/watch?v=3RHtEOQj4yo
https://www.youtube.com/results?sear...enter+bee+trap

If that is beyond your skill set:
http://ebay.to/2sGQ1X9
https://www.amazon.com/dp/B01A9GOTTM/
https://www.amazon.com/dp/B06XGGWWB7/
https://www.youtube.com/watch?v=TRoKgVQEjLQ


He wasn't asking about bees, he was asking for finishing advice.


She got lucky. It's bonus reply SUNDAY!
now run along and... http://i.imgur.com/Fvfh8sY.gif


What is this, National Be A Jackass Week?

Spalted Walt June 18th 17 06:57 PM

Covering patches over a non-stainable wood filler
 
"J. Clarke" wrote:

He wasn't asking about bees, he was asking for finishing advice.


What is this, National Be A Jackass Week?


Nah, it's just you being an antagonistic prick as per usual.


J. Clarke[_4_] June 18th 17 08:23 PM

Covering patches over a non-stainable wood filler
 
In article ,
says...

"J. Clarke" wrote:

He wasn't asking about bees, he was asking for finishing advice.


What is this, National Be A Jackass Week?


Nah, it's just you being an antagonistic prick as per usual.


I'm chalking this one up to you having had too much spalt last night.


All times are GMT +1. The time now is 03:04 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter