Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default bosch jigsaw

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment








  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,559
Default bosch jigsaw

Electric Comet wrote in news3jkti$9p8$3
@dont-email.me:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.

Puckdropper
--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 499
Default bosch jigsaw

On Friday, December 23, 2016 at 10:56:46 AM UTC-6, Electric Comet wrote:
have been satsified with my bosch jigsaw
but it would really benefit from having a light
it would be another
useful feature to have a nozzle to blow out the dust


I see you are talking about these brand new high faluting jigsaws with all these fancy dandy luxuries. Wow. My Bosch is about 20 years old now. Good top handle design. These lights and blower things had not been invented back then.
  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,559
Default bosch jigsaw

FrozenNorth wrote in
news
Mine has a hand crank, if I want a light, there are always candles.


It must have taken quite some time to get your hand steady enough to follow
the line while cranking.

Puckdropper
--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!
  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default bosch jigsaw

On Fri, 23 Dec 2016 11:53:31 -0800 (PST)
" wrote:

I see you are talking about these brand new high faluting jigsaws
with all these fancy dandy luxuries. Wow. My Bosch is about 20
years old now. Good top handle design. These lights and blower
things had not been invented back then.


good to know this one comes from good lineage

the cordless makita drill and driver have lights and it is a very
useful feature

  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 499
Default bosch jigsaw

On Friday, December 23, 2016 at 4:25:04 PM UTC-6, Electric Comet wrote:
On Fri, 23 Dec 2016 11:53:31 -0800 (PST)
" wrote:

I see you are talking about these brand new high faluting jigsaws
with all these fancy dandy luxuries. Wow. My Bosch is about 20
years old now. Good top handle design. These lights and blower
things had not been invented back then.


good to know this one comes from good lineage

the cordless makita drill and driver have lights and it is a very
useful feature


Cordless drills (drills, not drivers) had been invented when I bought my Bosch jigsaw. On drills lights make sense because you can and do drill when you do not have a good site line to what you are drilling. And drill in small enclosed spaces with poor visibility. But jigsaws are usually used where you can see what you are cutting and follow the line. With drills you are laying on your belly with your arm stretched out and drilling a hole or driving a screw. You don't operate jigsaws like that. So lights on jigsaws make just a little more sense than lights on circular saws. Do people want lights on their worm drive Skilsaw?
  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

Electric Comet wrote in news3jkti$9p8$3
:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.


IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.


Sucking is better than blowing.
  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On Fri, 23 Dec 2016 15:08:24 -0800 (PST), "
wrote:

On Friday, December 23, 2016 at 4:25:04 PM UTC-6, Electric Comet wrote:
On Fri, 23 Dec 2016 11:53:31 -0800 (PST)
" wrote:

I see you are talking about these brand new high faluting jigsaws
with all these fancy dandy luxuries. Wow. My Bosch is about 20
years old now. Good top handle design. These lights and blower
things had not been invented back then.


good to know this one comes from good lineage

the cordless makita drill and driver have lights and it is a very
useful feature


Cordless drills (drills, not drivers) had been invented when I bought my Bosch jigsaw. On drills lights make sense because you can and do drill when you do not have a good site line to what you are drilling. And drill in small enclosed spaces with poor visibility. But jigsaws are usually used where you can see what you are cutting and follow the line. With drills you are laying on your belly with your arm stretched out and drilling a hole or driving a screw. You don't operate jigsaws like that. So lights on jigsaws make just a little more sense than lights on circular saws. Do people want lights on their worm drive Skilsaw?


Sure. All light helps.


  #11   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default bosch jigsaw

On Fri, 23 Dec 2016 15:08:24 -0800 (PST)
" wrote:

don't operate jigsaws like that. So lights on jigsaws make just a
little more sense than lights on circular saws. Do people want
lights on their worm drive Skilsaw?


that would be useful also

anything to improve visibility is good

maybe wearing hunting glasses will help


as for blowing the dust they could use the wind coming from
the motor on the jigsaw and from the blade on the skilsaw and
direct it at the leading edge








  #12   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 171
Default bosch jigsaw

On 12/23/2016 8:23 PM, krw wrote:
On Fri, 23 Dec 2016 15:08:24 -0800 (PST), "
wrote:

On Friday, December 23, 2016 at 4:25:04 PM UTC-6, Electric Comet wrote:
On Fri, 23 Dec 2016 11:53:31 -0800 (PST)
" wrote:

I see you are talking about these brand new high faluting jigsaws
with all these fancy dandy luxuries. Wow. My Bosch is about 20
years old now. Good top handle design. These lights and blower
things had not been invented back then.

good to know this one comes from good lineage

the cordless makita drill and driver have lights and it is a very
useful feature


Cordless drills (drills, not drivers) had been invented when I bought my Bosch jigsaw. On drills lights make sense because you can and do drill when you do not have a good site line to what you are drilling. And drill in small enclosed spaces with poor visibility. But jigsaws are usually used where you can see what you are cutting and follow the line. With drills you are laying on your belly with your arm stretched out and drilling a hole or driving a screw. You don't operate jigsaws like that. So lights on jigsaws make just a little more sense than lights on circular saws. Do people want lights on their worm drive Skilsaw?


Sure. All light helps.

Yep. I had a Crapsman router that came with a very useful light. Made
it much easier to watch the bit work its way out of the chuck.
  #13   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On Fri, 23 Dec 2016 21:52:52 -0500, Larry Kraus
wrote:

On 12/23/2016 8:23 PM, krw wrote:
On Fri, 23 Dec 2016 15:08:24 -0800 (PST), "
wrote:

On Friday, December 23, 2016 at 4:25:04 PM UTC-6, Electric Comet wrote:
On Fri, 23 Dec 2016 11:53:31 -0800 (PST)
" wrote:

I see you are talking about these brand new high faluting jigsaws
with all these fancy dandy luxuries. Wow. My Bosch is about 20
years old now. Good top handle design. These lights and blower
things had not been invented back then.

good to know this one comes from good lineage

the cordless makita drill and driver have lights and it is a very
useful feature

Cordless drills (drills, not drivers) had been invented when I bought my Bosch jigsaw. On drills lights make sense because you can and do drill when you do not have a good site line to what you are drilling. And drill in small enclosed spaces with poor visibility. But jigsaws are usually used where you can see what you are cutting and follow the line. With drills you are laying on your belly with your arm stretched out and drilling a hole or driving a screw. You don't operate jigsaws like that. So lights on jigsaws make just a little more sense than lights on circular saws. Do people want lights on their worm drive Skilsaw?


Sure. All light helps.

Yep. I had a Crapsman router that came with a very useful light. Made
it much easier to watch the bit work its way out of the chuck.


LOL! Makes perfect sense.
  #14   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,559
Default bosch jigsaw

" wrote in
:


Cordless drills (drills, not drivers) had been invented when I bought
my Bosch jigsaw. On drills lights make sense because you can and do
drill when you do not have a good site line to what you are drilling.
And drill in small enclosed spaces with poor visibility. But jigsaws
are usually used where you can see what you are cutting and follow the
line. With drills you are laying on your belly with your arm
stretched out and drilling a hole or driving a screw. You don't
operate jigsaws like that. So lights on jigsaws make just a little
more sense than lights on circular saws. Do people want lights on
their worm drive Skilsaw?


YES!!!!!!!

I'm young, I've got good low-light vision. I don't need much light, but
a single LED on either side of the blade would be nice when I'm trying to
freehand a cut. The saw casts a shadow, I cast a shadow, sometimes that
line gets to be rather dark.

Puckdropper
--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!
  #15   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,559
Default bosch jigsaw

krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.


Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.

Puckdropper

--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!


  #16   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 723
Default bosch jigsaw

In article 585e0f07$0$7342$c3e8da3
, Puckdropper
says...

krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.


Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.

Puckdropper


And if you're cutting steel with a lubricant
(which Bosch saws will do--the old ones even had
a powered lubricant dispenser accessory
available that was driven by the saw) do you
really want to be sucking the lubricant and
chips into the mechanism?

Of course you can always go green, but even
green doesn't suck with the saw's mechanism,
they just provide a dust port to which a
(preferably green) vacuum can be attached.
  #17   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On 24 Dec 2016 06:00:39 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.


Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.


Well, if you're into balls... ;-)

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.


But then you have to suck it away later. Except for the bigger tail,
I find the vacuum much better.
  #18   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On Sat, 24 Dec 2016 07:25:58 -0500, "J. Clarke"
wrote:

In article 585e0f07$0$7342$c3e8da3
, Puckdropper
says...

krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.

Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.

Puckdropper


And if you're cutting steel with a lubricant
(which Bosch saws will do--the old ones even had
a powered lubricant dispenser accessory
available that was driven by the saw) do you
really want to be sucking the lubricant and
chips into the mechanism?


Into the mechanism? I don't think you want to blow it around the
room, either.

Of course you can always go green, but even
green doesn't suck with the saw's mechanism,
they just provide a dust port to which a
(preferably green) vacuum can be attached.


Sure. I wouldn't want to steal power from the saw for the vacuum, nor
would I want to control but the saw and the vacuum.
  #19   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 723
Default bosch jigsaw

In article 5c1t5ct0e6godrj5pmmi20jams0dafcd9u@
4ax.com, says...

On Sat, 24 Dec 2016 07:25:58 -0500, "J. Clarke"
wrote:

In article 585e0f07$0$7342$c3e8da3
, Puckdropper
says...

krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.

Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.

Puckdropper


And if you're cutting steel with a lubricant
(which Bosch saws will do--the old ones even had
a powered lubricant dispenser accessory
available that was driven by the saw) do you
really want to be sucking the lubricant and
chips into the mechanism?


Into the mechanism? I don't think you want to blow it around the
room, either.


And yet that has been normal practice ever since
sawing was invented.

Of course you can always go green, but even
green doesn't suck with the saw's mechanism,
they just provide a dust port to which a
(preferably green) vacuum can be attached.


Sure. I wouldn't want to steal power from the saw for the vacuum, nor
would I want to control but the saw and the vacuum.


So you favor a jigsaw with a vacuum attachment.
While that is certainly OK if you are sawing in
your mother's living room, on a construction
site controlling the dust is of considerably
less importance.


  #20   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,278
Default bosch jigsaw

On 12/24/2016 12:55 AM, Puckdropper wrote:

I'm young, I've got good low-light vision. I don't need much light, but
a single LED on either side of the blade would be nice when I'm trying to
freehand a cut. The saw casts a shadow, I cast a shadow, sometimes that
line gets to be rather dark.


For free hand cutting long lines, the saw needs a laser light to mark
the line. A laser makes it super simple to follow a line for even a
beginner. If you go off the line a tad, it is immediately obvious. All
circular saws should have a laser light.

--
Jack
Add Life to your Days not Days to your Life.
http://jbstein.com


  #21   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default bosch jigsaw

On 12/23/2016 7:21 PM, krw wrote:
On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

Electric Comet wrote in news3jkti$9p8$3
@dont-email.me:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.


IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).


I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.





IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.


Sucking is better than blowing.


  #22   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default bosch jigsaw

On 12/24/2016 12:00 AM, Puckdropper wrote:
krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.


Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.

Puckdropper


Maybe for moving ping pong balls. ;~) In this instance I would rather
the debris be removed at the source rather than blowing it all over the
area. FWIW my Milwaukee jig saw has a blower and it blows. Works much
better with the shop vac attached and running.
  #23   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,559
Default bosch jigsaw

krw wrote in
:

On 24 Dec 2016 06:00:39 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

*trim*


If you need to see a line, a blower can be more efficient than trying
to suck the dust away.


But then you have to suck it away later. Except for the bigger tail,
I find the vacuum much better.


The Bosch blower doesn't have a tail, and only moves the dust just far
enough away you can see the line. You'll still have to sweep or vacuum
it up later, but a jigsaw with giant hose would be rather cumbersome.

Puckdropper
--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!
  #24   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On Sat, 24 Dec 2016 10:24:33 -0500, "J. Clarke"
wrote:

In article 5c1t5ct0e6godrj5pmmi20jams0dafcd9u@
4ax.com, says...

On Sat, 24 Dec 2016 07:25:58 -0500, "J. Clarke"
wrote:

In article 585e0f07$0$7342$c3e8da3
, Puckdropper
says...

krw wrote in news:3bjr5cp3effcbmilim0g15lp1ii5857lcn@
4ax.com:

On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:


*trim*

IIRC, my 1590 does have a blower... it's good enough. It's the switch
with two positions.

Sucking is better than blowing.


Not always. (Do you like to argue?) Try this experiment (Bill Pentz
came up with it): Take a ping pong ball and two straws. One person can
only blow through the straw and the other can only suck. Try to get the
ball to go out of a circle or into an area. The person blowing will win
every game.

If you need to see a line, a blower can be more efficient than trying to
suck the dust away.

Puckdropper

And if you're cutting steel with a lubricant
(which Bosch saws will do--the old ones even had
a powered lubricant dispenser accessory
available that was driven by the saw) do you
really want to be sucking the lubricant and
chips into the mechanism?


Into the mechanism? I don't think you want to blow it around the
room, either.


And yet that has been normal practice ever since
sawing was invented.


Because it was "always done that way" doesn't mean there aren't better
ways.


Of course you can always go green, but even
green doesn't suck with the saw's mechanism,
they just provide a dust port to which a
(preferably green) vacuum can be attached.


Sure. I wouldn't want to steal power from the saw for the vacuum, nor
would I want to control but the saw and the vacuum.


So you favor a jigsaw with a vacuum attachment.


Not sure. The tail seems like it would get in the way for many cuts.

While that is certainly OK if you are sawing in
your mother's living room, on a construction
site controlling the dust is of considerably
less importance.


A jig saw on a construction site? Don't believe I've ever seen one. I
try not to throw sawdust around my shop (not always successfully).
  #25   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On 24 Dec 2016 18:12:14 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

krw wrote in
:

On 24 Dec 2016 06:00:39 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

*trim*


If you need to see a line, a blower can be more efficient than trying
to suck the dust away.


But then you have to suck it away later. Except for the bigger tail,
I find the vacuum much better.


The Bosch blower doesn't have a tail, and only moves the dust just far
enough away you can see the line. You'll still have to sweep or vacuum
it up later, but a jigsaw with giant hose would be rather cumbersome.


I haven't tried it but wouldn't automatically discount it. I thought
a vacuum on a router would be cumbersome, too, but it's easier than
cleaning up afterwards.


  #26   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/23/2016 7:21 PM, krw wrote:
On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

Electric Comet wrote in news3jkti$9p8$3
@dont-email.me:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.


IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).


I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.


Probably because American lawyers will convince juries that a blade
that looks like it's not moving is "dangerous".

I think the idea of the "stopped" blade is that one can see where the
teeth are (they're doing the cutting, after all).

  #27   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default bosch jigsaw

On 12/24/2016 1:35 PM, krw wrote:
On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/23/2016 7:21 PM, krw wrote:
On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

Electric Comet wrote in news3jkti$9p8$3
@dont-email.me:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.

IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).


I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.


Probably because American lawyers will convince juries that a blade
that looks like it's not moving is "dangerous".

I think the idea of the "stopped" blade is that one can see where the
teeth are (they're doing the cutting, after all).

Understood but really, I know where the teeth are, what difference does
it make to see the teeth?
  #28   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 217
Default bosch jigsaw

On Sat, 24 Dec 2016 23:52:57 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/24/2016 1:35 PM, krw wrote:
On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/23/2016 7:21 PM, krw wrote:
On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

Electric Comet wrote in news3jkti$9p8$3
@dont-email.me:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.

IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).

I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.


Probably because American lawyers will convince juries that a blade
that looks like it's not moving is "dangerous".

I think the idea of the "stopped" blade is that one can see where the
teeth are (they're doing the cutting, after all).

Understood but really, I know where the teeth are, what difference does
it make to see the teeth?


So you can see where the cut will be, rather than where it was?
  #29   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default bosch jigsaw

On 12/25/2016 7:41 AM, krw wrote:
On Sat, 24 Dec 2016 23:52:57 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/24/2016 1:35 PM, krw wrote:
On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/23/2016 7:21 PM, krw wrote:
On 23 Dec 2016 19:20:22 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

Electric Comet wrote in news3jkti$9p8$3
@dont-email.me:

have been satsified with my bosch jigsaw

but it would really benefit from having a light

not sure why there is no light

it would not add much to the cost and it would be really helpful

also annoying to have to blow out the dust so it would be another
useful feature to have a nozzle to blow out the dust

otherwise it is a great tool

the quick blade change is excellent as is the blade angle of cut
adjustment


Someone must own a patent somewhere... Although I'd consider it obvious
to anyone in the industry: An integrated light shining on the working
area of the tool.

IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).

I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.

Probably because American lawyers will convince juries that a blade
that looks like it's not moving is "dangerous".

I think the idea of the "stopped" blade is that one can see where the
teeth are (they're doing the cutting, after all).

Understood but really, I know where the teeth are, what difference does
it make to see the teeth?


So you can see where the cut will be, rather than where it was?


LOL. I think it is probably like a laser on a DP. Perhaps if I used
one I might see the advantage.
  #30   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,349
Default bosch jigsaw

On 2016-12-25, Leon lcb11211@swbelldotnet wrote:

Understood but really, I know where the teeth are, what difference does
it make to see the teeth?


Agree.

A strobe light makes little sense. I'd much rather have some sorta
sawdust blower on my blowerless/lightless DeWalt jig saw.

A lotta folks have weighed in on how blowers are of little help. It's
still gotta be better than trying to maintain a wheezing "puff" with my
geezer lungs.

nb


  #31   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,043
Default bosch jigsaw

On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).


I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.


Check and see if it stop motions the teeth, would it make possible to
see a broken tooth? Those Germans tend to engineer thing out to
infinity.
  #32   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default bosch jigsaw

On 12/27/2016 3:39 PM, Markem wrote:
On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).


I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.


Check and see if it stop motions the teeth, would it make possible to
see a broken tooth? Those Germans tend to engineer thing out to
infinity.


Yes, the saw stop motions the blade.


BUT you can see a broken tooth with the saw turned off.


  #33   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default bosch jigsaw

On Thu, 29 Dec 2016 11:57:59 -0600, Leon lcb11211@swbelldotnet
wrote:

On 12/27/2016 3:39 PM, Markem wrote:
On Sat, 24 Dec 2016 11:49:32 -0600, Leon lcb11211@swbelldotnet
wrote:

IIRC, the Festool has a strobe light. That's a different and useful
idea (i.e. patentable).

I have often wondered why a strobe and how that would be useful. Do you
know or have a clue? I do know that the latest strobe light Festool
jig saw was delayed for sale in the US, IIRC it had something to do with
the strobe making the blade appear to be not moving up and down.


Check and see if it stop motions the teeth, would it make possible to
see a broken tooth? Those Germans tend to engineer thing out to
infinity.


Yes, the saw stop motions the blade.


BUT you can see a broken tooth with the saw turned off.

Only if it's above the table. ;-)
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bosch SDS jigsaw PST700PAE. Dave Plowman (News) UK diy 5 December 6th 05 03:49 PM
Bosch Jigsaw Differences No Woodworking 5 September 27th 05 09:57 PM
Bosch jigsaw $85 at Blain's F&F AL Woodworking 1 September 23rd 05 04:16 PM
Bosch 1590 jigsaw David Hall Woodworking 21 December 24th 04 06:20 PM
Bosch jigsaw accessories? Chris Merrill Woodworking 1 July 15th 03 01:06 AM


All times are GMT +1. The time now is 07:28 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"