see binaries swiss army knife 2
 

My roubo like bench has become a swiss army knife...

--
Jeff

see binaries swiss army knife 2
 

On 1/16/2014 8:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...

I'd love to see that, but I don't get the binaries group. Got photos
anywhere else?

see binaries swiss army knife 2
 

What a nice shop.....and multi-use......
john

"woodchucker" wrote in message
...

My roubo like bench has become a swiss army knife...

--
Jeff

see binaries swiss army knife 2
 

On 1/16/2014 8:59 PM, Greg Guarino wrote:
On 1/16/2014 8:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...

I'd love to see that, but I don't get the binaries group. Got photos
anywhere else?
Greg you can't get alt.binaries.pictures.woodworking?

I'll see about putting them up on imgur.

--
Jeff

see binaries swiss army knife 2
 

On 1/16/2014 8:59 PM, Greg Guarino wrote:
On 1/16/2014 8:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...

I'd love to see that, but I don't get the binaries group. Got photos
anywhere else?

See http://imgur.com/a/YbWt2#0

--
Jeff

see binaries swiss army knife 2
 

On 1/16/2014 9:18 PM, jloomis wrote:
What a nice shop.....and multi-use......
john

"woodchucker" wrote in message
...

My roubo like bench has become a swiss army knife...


Thanks.

--
Jeff

see binaries swiss army knife 2
 

"Greg Guarino" wrote:

I'd love to see that, but I don't get the binaries group.

Astraweb.com solves that problem.

Lew

see binaries swiss army knife 2
 

On Thursday, January 16, 2014 7:47:53 PM UTC-6, woodchucker wrote:
My roubo like bench has become a swiss army knife...



--

Jeff

OK, Jeff, when are you coming over to help me organize my shop?

Larry

see binaries swiss army knife 2
 

On 1/16/2014 7:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...



I would like to see the other end of the pipes to see how you make your
coarse adjustments. Would that bee too much trouble?

see binaries swiss army knife 2
 

On 1/17/2014 10:04 AM, Leon wrote:
On 1/16/2014 7:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...



I would like to see the other end of the pipes to see how you make your
coarse adjustments. Would that bee too much trouble?

See http://imgur.com/a/pgZ3e#0 I moved it to a separate page and
annotated it. Removed older images and put new images in place.
All 2x construction for cheap bench. I am leaving many chisel marks in
it, so it's not worrying me. If it really goes to crap, I'll just plane
it down and put a masonite top on it. But I don't see it being a
problem. It's saving my real workbench, and giving my back a well needed
rest for marking.

I did make the legs too high. My first set of dovetails came out awful,
I finally figured that my arm is too high. So it should be an inch or 2
lower, so that when sawing my arm is level. I did not anticipate the saw
height when I built it. I noticed my arm was level to the bench. Should
have put a saw in my hand, it makes a difference.

--
Jeff

see binaries swiss army knife 2
 

I'd love to see that, but I don't get the binaries group. Got photos

anywhere else?


OK, I will rant. I just use Google news reader. Yes newsgroups are old technology living in this modern age. Alt binaries is always a problem for me too. I have never found a good solution and usually just do a Google search and find some re-poster site thing where I can view them. What a hassle. Wish we could just post pics here. But please all use flicker or flucker or some facebook or some fricking normal thing with a link so we can just click and see.

see binaries swiss army knife 2
 

woodchucker wrote:
On 1/17/2014 10:04 AM, Leon wrote:
On 1/16/2014 7:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...



I would like to see the other end of the pipes to see how you make your
coarse adjustments. Would that bee too much trouble?

See http://imgur.com/a/pgZ3e#0 I moved it to a separate page and
annotated it. Removed older images and put new images in place.
All 2x construction for cheap bench. I am leaving many chisel marks in
it, so it's not worrying me. If it really goes to crap, I'll just plane
it down and put a masonite top on it. But I don't see it being a
problem. It's saving my real workbench, and giving my back a well needed
rest for marking.

I did make the legs too high. My first set of dovetails came out awful,
I finally figured that my arm is too high. So it should be an inch or 2
lower, so that when sawing my arm is level. I did not anticipate the saw
height when I built it. I noticed my arm was level to the bench. Should
have put a saw in my hand, it makes a difference.

Those are man-sized pipe clamps!

--
 GW Ross 

 A little inaccuracy saves tons of 
 explanation. 

see binaries swiss army knife 2
 

On 1/17/2014 1:40 PM, G. Ross wrote:
woodchucker wrote:
On 1/17/2014 10:04 AM, Leon wrote:
On 1/16/2014 7:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...



I would like to see the other end of the pipes to see how you make your
coarse adjustments. Would that bee too much trouble?

See http://imgur.com/a/pgZ3e#0 I moved it to a separate page and
annotated it. Removed older images and put new images in place.
All 2x construction for cheap bench. I am leaving many chisel marks in
it, so it's not worrying me. If it really goes to crap, I'll just plane
it down and put a masonite top on it. But I don't see it being a
problem. It's saving my real workbench, and giving my back a well needed
rest for marking.

I did make the legs too high. My first set of dovetails came out awful,
I finally figured that my arm is too high. So it should be an inch or 2
lower, so that when sawing my arm is level. I did not anticipate the saw
height when I built it. I noticed my arm was level to the bench. Should
have put a saw in my hand, it makes a difference.

Those are man-sized pipe clamps!

???


--
Jeff

see binaries swiss army knife 2
 

On 1/17/2014 11:10 AM, woodchucker wrote:
On 1/17/2014 10:04 AM, Leon wrote:
On 1/16/2014 7:47 PM, woodchucker wrote:
My roubo like bench has become a swiss army knife...



I would like to see the other end of the pipes to see how you make your
coarse adjustments. Would that bee too much trouble?

See http://imgur.com/a/pgZ3e#0 I moved it to a separate page and
annotated it. Removed older images and put new images in place.
All 2x construction for cheap bench. I am leaving many chisel marks in
it, so it's not worrying me. If it really goes to crap, I'll just plane
it down and put a masonite top on it. But I don't see it being a
problem. It's saving my real workbench, and giving my back a well needed
rest for marking.

I did make the legs too high. My first set of dovetails came out awful,
I finally figured that my arm is too high. So it should be an inch or 2
lower, so that when sawing my arm is level. I did not anticipate the saw
height when I built it. I noticed my arm was level to the bench. Should
have put a saw in my hand, it makes a difference.



Thank you!

see binaries swiss army knife 2
 

SonomaProducts.com wrote:
I'd love to see that, but I don't get the binaries group. Got photos

anywhere else?


OK, I will rant. I just use Google news reader. Yes newsgroups are
old technology living in this modern age. Alt binaries is always a
problem for me too. I have never found a good solution and usually
just do a Google search and find some re-poster site thing where I
can view them. What a hassle. Wish we could just post pics here. But
please all use flicker or flucker or some facebook or some fricking
normal thing with a link so we can just click and see.

Echo that. I'm an old school usenet user but to be frank, the binary groups
are not worth chasing after anymore. There are tons of free web sites to
upload pictures to and then just post the link. Everybody can see it, it
generally shows better, and it generally downloads better. Let the binary
groups die. They've served their purpose and no longer do.

--

-Mike-

see binaries swiss army knife 2
 

Mike Marlow wrote:
SonomaProducts.com wrote:
I'd love to see that, but I don't get the binaries group. Got photos
anywhere else?
OK, I will rant. I just use Google news reader. Yes newsgroups are
old technology living in this modern age. Alt binaries is always a
problem for me too. I have never found a good solution and usually
just do a Google search and find some re-poster site thing where I
can view them. What a hassle. Wish we could just post pics here. But
please all use flicker or flucker or some facebook or some fricking
normal thing with a link so we can just click and see.
Echo that. I'm an old school usenet user but to be frank, the binary groups
are not worth chasing after anymore. There are tons of free web sites to
upload pictures to and then just post the link. Everybody can see it, it
generally shows better, and it generally downloads better. Let the binary
groups die. They've served their purpose and no longer do.

Build your own website. Then you can include photos and text as you
please and modify as you see fit. Works for me.
I can't access Facebook as I don't have an account there, so that
doesn't work for me.