Raised panels with a straight bit? Yep!
 

It occurred to me that I could potentially make raised panels with my new tilting router table fence. I gave it a shot this evening and it works like a charm. Any one see any potential problems in using a solid carbide upcut bit for this? The stress will be only on one side of the bit at a time. My thinking is that this is fine.

Pictu
http://www.garagewoodworks.com/pictu...uter_tilt1.jpg

Fence if you want to get the plans (not the purpose of this post - just in case anyone is interested)
http://www.garagewoodworks.com/GW_Store.php#tilted

Raised panels with a straight bit? Yep!
 

On Apr 30, 9:48*pm, wrote:
It occurred to me that I could potentially make raised panels with my new tilting router table fence. *I gave it a shot this evening and it works like a charm. *Any one see any potential problems in using a solid carbide upcut bit for this? *The stress will be only on one side of the bit at a time. *My thinking is that this is fine.

Pictuhttp://www.garagewoodworks.com/pictu...uter_tilt1.jpg

Fence if you want to get the plans (not the purpose of this post - just in case anyone is interested)http://www.garagewoodworks.com/GW_Store.php#tilted

Similar idea rotated 90 degrees:

http://www.youtube.com/watch?v=EBxyPdBZVR8

Start at 1:48

Raised panels with a straight bit? Yep!
 

On 4/30/2013 6:48 PM, wrote:
It occurred to me that I could potentially make raised panels with my new tilting router table fence. I gave it a shot this evening and it works like a charm. Any one see any potential problems in using a solid carbide upcut bit for this? The stress will be only on one side of the bit at a time. My thinking is that this is fine.

Pictu
http://www.garagewoodworks.com/pictu...uter_tilt1.jpg

Fence if you want to get the plans (not the purpose of this post - just in case anyone is interested)
http://www.garagewoodworks.com/GW_Store.php#tilted


Since you enjoy building jigs, this might give you some ideas.

They have been selling this for several years and it really has
some pretty interesting "features".

http://www.mlcswoodworking.com/shops...oriztab_anchor

Raised panels with a straight bit? Yep!
 

Any one see any potential problems in using a solid carbide upcut bit for this? The stress will be only on one side of the bit at a time. My thinking is that this is fine.



Seems like a great idea and should be fine as long as you don't mash it. I've only broken spiral bits when hitting them with interrupted cuts or other jostling type situation. They hold up well under consistent stress.

I assume you will use us a multiple pass scenario if using a hardwood not pine. Does your jig\fence accommodate the concept of multiple settings. Typically on a flat fence you setup for the final cut then add shims to the face that can be removed as you do sequential passes.

Raised panels with a straight bit? Yep!
 

On Thursday, May 2, 2013 6:29:36 AM UTC-4, SonomaProducts.com wrote:
Any one see any potential problems in using a solid carbide upcut bit for this? The stress will be only on one side of the bit at a time. My thinking is that this is fine.







Seems like a great idea and should be fine as long as you don't mash it. I've only broken spiral bits when hitting them with interrupted cuts or other jostling type situation. They hold up well under consistent stress.



I assume you will use us a multiple pass scenario if using a hardwood not pine. Does your jig\fence accommodate the concept of multiple settings. Typically on a flat fence you setup for the final cut then add shims to the face that can be removed as you do sequential passes.

Yes multiple passes (1/8" or increments or so -give or take). No shims but I keep a stop behind the fence. I'm using an old contractor saw as my router table so I use the existing miter tracks to hold adjustable stops.

Seems to have worked great. I plan on posting a video of the process for making raised panels and splined miter joints tomorrow. I'll probably post a link here tomorrow so I can get the rec feedback.

I'm not sure how often I'd use this method but it is pretty cool. The TS would definitely be faster. Might be a good idea to use both a TS to cut off the bulk and follow up with the router for the finish pass.

Cheers!