Adhesive for Plexiglas to wood
 

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

Adhesive for Plexiglas to wood
 

On 2/27/2013 7:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

http://www.thistothat.com

--
 GW Ross 

 The cost of feathers has risen... Now 
 even DOWN is up! 

Adhesive for Plexiglas to wood
 

MaxD wrote in news:512ea628$0$59602$c3e8da3
:

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?

Screws.

What's the application, specifically?

Adhesive for Plexiglas to wood
 

I'd say Acrylic itself. Just like welding two slabs together.

Martin

On 2/27/2013 6:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

Adhesive for Plexiglas to wood
 

On 2/27/2013 5:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

silicone.

Adhesive for Plexiglas to wood
 

"MaxD" wrote in message
eb.com...

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

----------------------------------------------------

3M 5200

HD should have it.

Lew

Adhesive for Plexiglas to wood
 

On 2/27/2013 7:48 PM, Doug Miller wrote:
MaxD wrote in news:512ea628$0$59602$c3e8da3
:

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?

Screws.

What's the application, specifically?


I am making a dust "shroud", "blade enclosure", whatever the appropriate
terminology might be to describe a device to collect dust over a table
saw blade.
I'm making the sides out of Birch ply and the top out of 1/4" acrylic.
Similar to this:
http://tinyurl.com/d8lsjgz

Max

Adhesive for Plexiglas to wood
 

On 2/28/2013 7:34 AM, chaniarts wrote:
On 2/27/2013 5:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

silicone.

Well, I was planning on using silicone to seal any openings that need
it. So...

Adhesive for Plexiglas to wood
 

On 2/27/2013 6:17 PM, G.W.Ross wrote:
On 2/27/2013 7:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

http://www.thistothat.com


Cool web site, thanks

Adhesive for Plexiglas to wood
 

On 02/28/2013 07:21 PM, MaxD wrote:
On 2/28/2013 7:34 AM, chaniarts wrote:
On 2/27/2013 5:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

silicone.

Well, I was planning on using silicone to seal any openings that need
it. So...

Looks like simple screws through the plexi/acrylic into the wood. If
the plexi/acrylic is shaped properly to match the curvature of the wood
sides, screws should be all that is required. There wouldn't be enough
air leakage to make a difference. Most of the leakage will come through
the bottom which rides on the work piece.


--
"Socialism is a philosophy of failure,the creed of ignorance, and the
gospel of envy, its inherent virtue is the equal sharing of misery"
-Winston Churchill

Adhesive for Plexiglas to wood
 

On 2/28/2013 8:21 PM, MaxD wrote:
On 2/28/2013 7:34 AM, chaniarts wrote:
On 2/27/2013 5:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

silicone.

Well, I was planning on using silicone to seal any openings that need
it. So...

May I try to talk you out of that?

Silicone tends to "poison" the surface of anything that it is used on.
Nothing else will ever stick to it again.
If repairs are ever needed that could cause all manner of problems.


Use 5200 as the adhesive, and as the seal.

Good stuff, Maynard.

Adhesive for Plexiglas to wood
 

MaxD wrote in
eb.com:

On 2/27/2013 6:17 PM, G.W.Ross wrote:
On 2/27/2013 7:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic)
to plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it
so...anything else? TIA.

Max

http://www.thistothat.com


Cool web site, thanks

I'd recommend polycarbonate (Lexan) over acrylic (Plexiglas). If
struck, acrylic will shatter into sharp bits. Lexan is the
prefered plastic for guards.

Ken

Adhesive for Plexiglas to wood
 

MaxD wrote in news:5130102b$0$64368$c3e8da3
:

On 2/27/2013 7:48 PM, Doug Miller wrote:
MaxD wrote in news:512ea628$0$59602$c3e8da3
:

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?

Screws.

What's the application, specifically?


I am making a dust "shroud", "blade enclosure", whatever the appropriate
terminology might be to describe a device to collect dust over a table
saw blade.
I'm making the sides out of Birch ply and the top out of 1/4" acrylic.

NO!!

Don't use acrylic for this application, it's not impact-resistant. Use polycarbonate instead.

And why make the sides out of wood? Why not make the whole thing out of polycarbonate?

Adhesive for Plexiglas to wood
 

On 3/1/2013 5:32 AM, Ken Moffett wrote:
MaxD wrote in
eb.com:

On 2/27/2013 6:17 PM, G.W.Ross wrote:
On 2/27/2013 7:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic)
to plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it
so...anything else? TIA.

Max

http://www.thistothat.com


Cool web site, thanks

I'd recommend polycarbonate (Lexan) over acrylic (Plexiglas). If
struck, acrylic will shatter into sharp bits. Lexan is the
prefered plastic for guards.

Ken


I already had the acrylic but I agree with you on the poly.
In the particular application I intend I would "hope" the plastic
doesn't get struck. ;-)

Max

Adhesive for Plexiglas to wood
 

On 3/1/2013 6:28 AM, Doug Miller wrote:
MaxD wrote in news:5130102b$0$64368$c3e8da3
:

On 2/27/2013 7:48 PM, Doug Miller wrote:
MaxD wrote in news:512ea628$0$59602$c3e8da3
:

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?

Screws.

What's the application, specifically?


I am making a dust "shroud", "blade enclosure", whatever the appropriate
terminology might be to describe a device to collect dust over a table
saw blade.
I'm making the sides out of Birch ply and the top out of 1/4" acrylic.

NO!!

Don't use acrylic for this application, it's not impact-resistant. Use polycarbonate instead.

And why make the sides out of wood? Why not make the whole thing out of polycarbonate?


Since this project is a "prototype" I will very likely build a Lexan
model. I'm primarily interested in determining how well the device
collects dust from the table top and establishing a method of mounting
the rest of the "system". I will have photos when I try it out.

Adhesive for Plexiglas to wood
 

On 2/28/2013 11:08 PM, Richard wrote:
On 2/28/2013 8:21 PM, MaxD wrote:
On 2/28/2013 7:34 AM, chaniarts wrote:
On 2/27/2013 5:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

silicone.

Well, I was planning on using silicone to seal any openings that need
it. So...

May I try to talk you out of that?

Silicone tends to "poison" the surface of anything that it is used on.
Nothing else will ever stick to it again.
If repairs are ever needed that could cause all manner of problems.


Use 5200 as the adhesive, and as the seal.

Good stuff, Maynard.

Thanks, Richard. I'm getting more votes for the 5200. ;-)

Max

Adhesive for Plexiglas to wood
 

MaxD wrote in
eb.com:

On 3/1/2013 6:28 AM, Doug Miller wrote:
MaxD wrote in news:5130102b$0$64368$c3e8da3
:

On 2/27/2013 7:48 PM, Doug Miller wrote:
MaxD wrote in news:512ea628$0$59602$c3e8da3
:

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?

Screws.

What's the application, specifically?


I am making a dust "shroud", "blade enclosure", whatever the
appropriate terminology might be to describe a device to collect
dust over a table saw blade.
I'm making the sides out of Birch ply and the top out of 1/4"
acrylic.

NO!!

Don't use acrylic for this application, it's not impact-resistant.
Use polycarbonate instead.

And why make the sides out of wood? Why not make the whole thing out
of polycarbonate?


Since this project is a "prototype" I will very likely build a Lexan
model. I'm primarily interested in determining how well the device
collects dust from the table top and establishing a method of mounting
the rest of the "system". I will have photos when I try it out.

Keep us abreast of your findings! I have an old Craftsman tablesaw with
a blade-shroud, but no suction. I think it is acrylic, but am not sure.
Finding a really good way to add suction there would be good ...

--
Best regards
Han
email address is invalid

Adhesive for Plexiglas to wood
 

On 3/1/2013 8:56 AM, Han wrote:
MaxD wrote in

Since this project is a "prototype" I will very likely build a Lexan
model. I'm primarily interested in determining how well the device
collects dust from the table top and establishing a method of mounting
the rest of the "system". I will have photos when I try it out.

Keep us abreast of your findings! I have an old Craftsman tablesaw with
a blade-shroud, but no suction. I think it is acrylic, but am not sure.
Finding a really good way to add suction there would be good ...


Will do.

Max

Adhesive for Plexiglas to wood
 

MaxD wrote in news:5130c0cf$0$64340$c3e8da3
:


Since this project is a "prototype" I will very likely build a Lexan
model. I'm primarily interested in determining how well the device
collects dust from the table top and establishing a method of mounting
the rest of the "system". I will have photos when I try it out.

In that case... make the entire prototype out of wood. Why bother using plastic for *any* of it?

Adhesive for Plexiglas to wood
 

"MaxD" wrote:

What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?

Screws.

What's the application, specifically?


I am making a dust "shroud", "blade enclosure", whatever the
appropriate terminology might be to describe a device to collect
dust over a table saw blade.
I'm making the sides out of Birch ply and the top out of 1/4"
acrylic.
Similar to this:
http://tinyurl.com/d8lsjgz

-----------------------------------------------------------------
Based on the tinyurl above, there is absolutely nothing to be gained
using 3M-5200.

Avoid acrylic like it was the plague because it will shatter from
almost
any contact by a chip thrown from the saw blade.

Use 1/4" polycarbonate (Lexan) and attach with some #10, pan head,
S/S, coarse thread, self tapping sheet metal screws.

Drill 7/32" clearance holes in the Lexan and 9/64" pilot drill in the
wood.

You need to provide some clearance between Lexan and fastener to
accommodate the difference in thermal expansion.

You can also make use of a 1,500 W heat gun to aid the Lexan
conforming to the shape of the wood.

Shoot a couple of coats of shellac to finish the job.

Have fun.

Lew

coarse thread

Adhesive for Plexiglas to wood
 

On Feb 28, 9:31*pm, Doug Winterburn wrote:
On 02/28/2013 07:21 PM, MaxD wrote:

On 2/28/2013 7:34 AM, chaniarts wrote:
On 2/27/2013 5:34 PM, MaxD wrote:
What adhesive would be best to fasten Plexiglas (acylic) to
plywood?(Baltic Birch)
I'm thinking epoxy but I'd have to go buy it so...anything else?
TIA.

Max

silicone.

Well, I was planning on using silicone to seal any openings that need
it. So...

Looks like simple screws through the plexi/acrylic into the wood. *If
the plexi/acrylic is shaped properly to match the curvature of the wood
sides, screws should be all that is required. *There wouldn't be enough
air leakage to make a difference. *Most of the leakage will come through
the bottom which rides on the work piece.

Pan head screws. Flat heads will split acrylic like wedges.

Adhesive for Plexiglas to wood
 

On 3/1/2013 1:32 PM, Doug Miller wrote:
MaxD wrote in news:5130c0cf$0$64340$c3e8da3
:


Since this project is a "prototype" I will very likely build a Lexan
model. I'm primarily interested in determining how well the device
collects dust from the table top and establishing a method of mounting
the rest of the "system". I will have photos when I try it out.

In that case... make the entire prototype out of wood. Why bother using plastic for *any* of it?


'Cause I have the plastic (several scraps) and I thought it would be
nice to see what's happening under the device. (what should I call this
thing anyway)
I put it together with epoxy and it seems sufficiently sturdy for
experimenting.
I'm taking the advice of those who recommend
1. Lexan
2. Making it all plastic. (I can get the adhesive the same place I get
the Lexan) (Baker Glass & Plastics, El Paso)

Meanwhile I'm figgerin' out the rest of the apparatus and how to mount
the "thing".

Adhesive for Plexiglas to wood
 

On 3/1/2013 2:42 PM, Lew Hodgett wrote:
"MaxD" wrote:

-----------------------------------------------------------------
Based on the tinyurl above, there is absolutely nothing to be gained
using 3M-5200.

Avoid acrylic like it was the plague because it will shatter from
almost
any contact by a chip thrown from the saw blade.

The working model will be all Lexan.

Use 1/4" polycarbonate (Lexan) and attach with some #10, pan head,
S/S, coarse thread, self tapping sheet metal screws.

I will use the adhesive for polycarbonate.

Drill 7/32" clearance holes in the Lexan and 9/64" pilot drill in the
wood.

You need to provide some clearance between Lexan and fastener to
accommodate the difference in thermal expansion.

Thanks for that tip!

You can also make use of a 1,500 W heat gun to aid the Lexan
conforming to the shape of the wood.

I have a good heat gun but I think I'll avoid trying to create any
curved surfaces.

Shoot a couple of coats of shellac to finish the job.

Have fun.

Lew

coarse thread


Many Thanks Lew.

Max

Adhesive for Plexiglas to wood
 

On 3/1/2013 5:57 PM, Father Haskell wrote:


Pan head screws. Flat heads will split acrylic like wedges.


Yep, and thanks

Max

Adhesive for Plexiglas to wood
 

MaxD wrote in
eb.com:

On 3/1/2013 1:32 PM, Doug Miller wrote:
MaxD wrote in news:5130c0cf$0$64340$c3e8da3
:


Since this project is a "prototype" I will very likely build a
Lexan model. I'm primarily interested in determining how well
the device collects dust from the table top and establishing a
method of mounting the rest of the "system". I will have
photos when I try it out.

In that case... make the entire prototype out of wood. Why
bother using plastic for *any* of it?


'Cause I have the plastic (several scraps) and I thought it
would be nice to see what's happening under the device. (what
should I call this thing anyway)
I put it together with epoxy and it seems sufficiently sturdy
for experimenting.
I'm taking the advice of those who recommend
1. Lexan
2. Making it all plastic. (I can get the adhesive the same place
I get the Lexan) (Baker Glass & Plastics, El Paso)

Meanwhile I'm figgerin' out the rest of the apparatus and how to
mount the "thing".

Good luck with it! Post photos when it's done, and let us know how
well it collects the dust.

Adhesive for Plexiglas to wood
 

"MaxD" wrote:
The working model will be all Lexan.
--------------------------------------------------
In that case, stop by a hobby shop and get a tube of
plastic model airplane glue.

Lew

Adhesive for Plexiglas to wood
 

"Lew Hodgett" wrote ...

"MaxD" wrote:
The working model will be all Lexan.
--------------------------------------------------
In that case, stop by a hobby shop and get a tube of
plastic model airplane glue.

Hobby shop??

They were quite common years ago. The last hobby shop around here died 5
years ago. I don't even know if there are any around here any more. I
understand on of the reasons is that all the manufacturers of various
military gear, trucks, etc insisted on big buck royalties for making models
of their products. Congress was supposed to change that, but they never
did. Guess they were too busy playing fiscal chicken.

Anyway, because of that, there is almost no more models any more. Unless
there has been a development lately that I never heard of. Doncha feel old?

Adhesive for Plexiglas to wood
 

On 3/1/2013 11:48 PM, Lee Michaels wrote:


"Lew Hodgett" wrote ...

"MaxD" wrote:
The working model will be all Lexan.
--------------------------------------------------
In that case, stop by a hobby shop and get a tube of
plastic model airplane glue.

Hobby shop??

They were quite common years ago. The last hobby shop around here died 5
years ago. I don't even know if there are any around here any more. I
understand on of the reasons is that all the manufacturers of various
military gear, trucks, etc insisted on big buck royalties for making
models of their products. Congress was supposed to change that, but they
never did. Guess they were too busy playing fiscal chicken.

Anyway, because of that, there is almost no more models any more. Unless
there has been a development lately that I never heard of. Doncha feel old?




BIG on-line model forum.
Lot's of plans, tips, builders,projects, etc

http://www.hippocketaeronautics.com/hpa_forum/index.php

Adhesive for Plexiglas to wood
 

"Lew Hodgett" wrote ...

"MaxD" wrote:
The working model will be all Lexan.
--------------------------------------------------
In that case, stop by a hobby shop and get a tube of
plastic model airplane glue.



"Lee Michaels" wrote:

Hobby shop??

They were quite common years ago. The last hobby shop around here
died 5 years ago. I don't even know if there are any around here
any more. I understand on of the reasons is that all the
manufacturers of various military gear, trucks, etc insisted on big
buck royalties for making models of their products. Congress was
supposed to change that, but they never did. Guess they were too
busy playing fiscal chicken.

Anyway, because of that, there is almost no more models any more.
Unless there has been a development lately that I never heard of.
Doncha feel old?

-------------------------------------------

Yep.

Oh well google "testors plastic cement".

Somebody still sells it.

Lew

Adhesive for Plexiglas to wood
 

On Sat, 02 Mar 2013 00:24:06 -0600, Richard
BIG on-line model forum.
Lot's of plans, tips, builders,projects, etc
http://www.hippocketaeronautics.com/hpa_forum/index.php

And, here's another large hobby shop.
http://www.micromark.com/

Adhesive for Plexiglas to wood
 

"Lew Hodgett" wrote in news:5131a522$0$38949
:


Yep.

Oh well google "testors plastic cement".

Somebody still sells it.

Lew

Check walthers.com They not only have a hobby shop locator, but a huge
catalog their dealers can order from. There's usually no extra charge for
shipping, but it does take a few days depending on the shop.

Puckdropper
--
Make it to fit, don't make it fit.

Adhesive for Plexiglas to wood
 

On 3/1/2013 10:48 PM, Lee Michaels wrote:


"Lew Hodgett" wrote ...

"MaxD" wrote:
The working model will be all Lexan.
--------------------------------------------------
In that case, stop by a hobby shop and get a tube of
plastic model airplane glue.

Hobby shop??

They were quite common years ago. The last hobby shop around here died
5 years ago. I don't even know if there are any around here any more.
I understand on of the reasons is that all the manufacturers of various
military gear, trucks, etc insisted on big buck royalties for making
models of their products. Congress was supposed to change that, but
they never did. Guess they were too busy playing fiscal chicken.

Anyway, because of that, there is almost no more models any more.
Unless there has been a development lately that I never heard of.
Doncha feel old?


towerhobbies.com

Been doing business with them for many years.

http://tinyurl.com/becy5oo

Max

Adhesive for Plexiglas to wood
 

"MaxD" wrote:

towerhobbies.com

Been doing business with them for many years.

http://tinyurl.com/becy5oo

------------------------------------------------
Looks like an RC unit.

RC was just starting when I got out.

During those years it was either U-Control or
free flight, 1/2 A (0.049 cubic inch) max for power.

Didn't have to chase it so far to retrieve it.

Used a fuse to activate de-thermalizer.

What engine do you have in it?

Lew

Adhesive for Plexiglas to wood
 

On 3/2/2013 4:58 PM, Lew Hodgett wrote:
"MaxD" wrote:

towerhobbies.com

Been doing business with them for many years.

http://tinyurl.com/becy5oo

------------------------------------------------
Looks like an RC unit.

RC was just starting when I got out.

During those years it was either U-Control or
free flight, 1/2 A (0.049 cubic inch) max for power.

Didn't have to chase it so far to retrieve it.

Used a fuse to activate de-thermalizer.

What engine do you have in it?

Lew





Ask around for fuse these days and see who comes to visit!

Adhesive for Plexiglas to wood
 

"Richard" wrote:

Ask around for fuse these days and see who comes to visit!
----------------------------------------------------------------
Back then, you made your own fuses.

As a pimple faced kid, got some funny looks when I asked the
druggest for salt-peter the first time.G

Druggist knew my dad.

No problem getting mason's twine.G


Lsw

Adhesive for Plexiglas to wood
 

On 3/2/2013 3:58 PM, Lew Hodgett wrote:
"MaxD" wrote:

towerhobbies.com

Been doing business with them for many years.

http://tinyurl.com/becy5oo

------------------------------------------------
Looks like an RC unit.

RC was just starting when I got out.

During those years it was either U-Control or
free flight, 1/2 A (0.049 cubic inch) max for power.

Didn't have to chase it so far to retrieve it.

Used a fuse to activate de-thermalizer.

What engine do you have in it?

Lew


Had to think about that for awhile. It's been quite a few years. I
believe that plane had a K&B .40
Futaba radio.

Adhesive for Plexiglas to wood
 

"MaxD" wrote in message
eb.com...
On 3/2/2013 3:58 PM,
towerhobbies.com

Been doing business with them for many years.

http://tinyurl.com/becy5oo

------------------------------------------------
Lew Hodgett wrote:

What engine do you have in it?
------------------------------------------------------
"MaxD" wrote:

Had to think about that for awhile. It's been quite a few years. I
believe that plane had a K&B .40
Futaba radio.
------------------------------------------------------
Looks like some things have stood the test of time.

K&B was a major engine supplier after WWII.

How many channels on the radio?

Lew

Adhesive for Plexiglas to wood
 

On 3/3/2013 8:30 PM, Lew Hodgett wrote:
"MaxD" wrote in message
eb.com...
On 3/2/2013 3:58 PM,
towerhobbies.com

Been doing business with them for many years.

http://tinyurl.com/becy5oo

------------------------------------------------
Lew Hodgett wrote:

What engine do you have in it?
------------------------------------------------------
"MaxD" wrote:

Had to think about that for awhile. It's been quite a few years. I
believe that plane had a K&B .40
Futaba radio.
------------------------------------------------------
Looks like some things have stood the test of time.

K&B was a major engine supplier after WWII.

How many channels on the radio?

Lew


Six.
We have an RC group here, "EL Paso Radio Controllers".
Several of the members were ex RCAT fliers for target practice at Fort
Bliss. They were really good.
There was a guy who used to stop by every now and then whose name You
might remember, Frank Borman. He owns a big auto dealership in Las
Cruces, NM
(35 miles N. of El Paso)

Adhesive for Plexiglas to wood
 

Lew Hodgett wrote:

How many channels on the radio?
---------------------------------------

"MaxD" wrote:

Six.
We have an RC group here, "EL Paso Radio Controllers".
Several of the members were ex RCAT fliers for target practice at
Fort Bliss. They were really good.
There was a guy who used to stop by every now and then whose name
You might remember, Frank Borman. He owns a big auto dealership in
Las Cruces, NM
(35 miles N. of El Paso)
----------------------------------------------------------
Back in the dark ages, 2 channels (elevator & rudder) was about it.

Engine and wheel control was still a wet dream.

Frank Borman.

Same guy who was president of Eastern Airlines after being a space
jockey?

Lew

Adhesive for Plexiglas to wood
 

On 3/4/2013 8:55 PM, Lew Hodgett wrote:
Lew Hodgett wrote:

How many channels on the radio?
---------------------------------------

"MaxD" wrote:

Six.
We have an RC group here, "EL Paso Radio Controllers".
Several of the members were ex RCAT fliers for target practice at
Fort Bliss. They were really good.
There was a guy who used to stop by every now and then whose name
You might remember, Frank Borman. He owns a big auto dealership in
Las Cruces, NM
(35 miles N. of El Paso)
----------------------------------------------------------
Back in the dark ages, 2 channels (elevator & rudder) was about it.

Engine and wheel control was still a wet dream.

Frank Borman.

Same guy who was president of Eastern Airlines after being a space
jockey?

Lew

Last time I dropped by the RC flying field I was stunned by the advances
in Radio Control. I didn't have my camera but I will the next chance I get.

http://www.youtube.com/watch?v=aV7beyFqE3g

That's the man. Interesting person.

http://www.bormanautoplex.com/