|
Mirror backing
We are putting a 41" X 33" mirror in the tv hole above our fire place.
The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. |
Mirror backing
On Monday, November 12, 2012 1:55:08 PM UTC-8, wrote:
We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. MDF |
Mirror backing
On 11/12/2012 3:19 PM, SonomaProducts.com wrote:
On Monday, November 12, 2012 1:55:08 PM UTC-8, wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. MDF drywall |
Mirror backing
On Mon, 12 Nov 2012 16:55:05 -0500, Keith Nuttle
wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. It shouldn't warp in the dry inside air, and it shouldn't get hot if you use your fireplace correctly (flue open). DAMHIKT What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. MDF, aka Termite Barf. It's more stable. DO seal all faces and edges, though. Are you going to make a hidden compartment, too? -- While we have the gift of life, it seems to me that only tragedy is to allow part of us to die - whether it is our spirit, our creativity, or our glorious uniqueness. -- Gilda Radner |
Mirror backing
On 11/12/12 4:38 PM, Larry Jaques wrote:
MDF, aka Termite Barf. It's more stable. DO seal all faces and edges, though. Why? I mean, I know why, but it's overkill. I've had mdf scraps sitting in my garage and shed for years and they look like the day I bought it, minus the mouse turns and spider webs. -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
Mirror backing
On 11/12/2012 3:55 PM, Keith Nuttle wrote:
We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. You should be talking to glass and mirror shop. |
Mirror backing
Keith Nuttle wrote:
We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. As long as the trim retains the morror in its niche, why bother with a backing? Hanging mirrors don't have them, not substantial ones at least. If you just gotta have something behind it, sheetrock, MDF, particle board, OSB, plywood would all work. My preference would be sheetrock. -- dadiOH ____________________________ Winters getting colder? Tired of the rat race? Maybe just ready for a change? Check it out... http://www.floridaloghouse.net |
Mirror backing Thank you
On 11/12/2012 11:20 PM, Leon wrote:
On 11/12/2012 3:55 PM, Keith Nuttle wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. You should be talking to glass and mirror shop. Thank you all for your responses. Since hopefully I will have the mirror installed tomorrow, this should be my last post with questions. I have been working on this project for some time. Yes I have talked with the man at the place that is cutting the mirror for me. But you know how it is, you are doing something you want nice that you have never done before. You get it all straight on what you are going to do and then something comes up that makes you question what you decided. Last item was the warped 1/2 plywood. I am going to go with MDF or similar composite wood. I had thought about sheet rock but because there will only be the 1X2 around the edges of the hole, I thought that over time the sheet rock edges would deteriorate and the mirror would become loose. Yes I know there is stuff cut for this purpose but I have a lot of 1X2 scrap |
Mirror backing
On Tue, 13 Nov 2012 07:47:13 -0500, "dadiOH"
wrote: Keith Nuttle wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. As long as the trim retains the morror in its niche, why bother with a backing? Hanging mirrors don't have them, not substantial ones at least. Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. -- While we have the gift of life, it seems to me that only tragedy is to allow part of us to die - whether it is our spirit, our creativity, or our glorious uniqueness. -- Gilda Radner |
Mirror backing
On 11/13/2012 9:59 AM, Larry Jaques wrote:
On Tue, 13 Nov 2012 07:47:13 -0500, wrote: Keith Nuttle wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. .... As long as the trim retains the morror in its niche, why bother with a backing? Hanging mirrors don't have them, not substantial ones at least. Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. .... Trip and fall _OVER_ the fireplace up into the TV niche above it???? That's some "trip"... :) -- |
Mirror backing
On 11/13/2012 10:03 AM, dpb wrote:
On 11/13/2012 9:59 AM, Larry Jaques wrote: On Tue, 13 Nov 2012 07:47:13 -0500, wrote: Keith Nuttle wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. ... As long as the trim retains the morror in its niche, why bother with a backing? Hanging mirrors don't have them, not substantial ones at least. Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. ... Trip and fall _OVER_ the fireplace up into the TV niche above it???? That's some "trip"... :) -- Normal trip if "you be trip'n". ;~) |
Mirror backing
dpb wrote:
On 11/13/2012 9:59 AM, Larry Jaques wrote: On Tue, 13 Nov 2012 07:47:13 -0500, wrote: Keith Nuttle wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. ... As long as the trim retains the morror in its niche, why bother with a backing? Hanging mirrors don't have them, not substantial ones at least. Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. ... Trip and fall _OVER_ the fireplace up into the TV niche above it???? That's some "trip"... :) Perhaps there be giants... -- dadiOH ____________________________ Winters getting colder? Tired of the rat race? Maybe just ready for a change? Check it out... http://www.floridaloghouse.net |
Mirror backing
On 11/13/12 9:59 AM, Larry Jaques wrote:
As long as the trim retains the morror in its niche, why bother with a backing? Hanging mirrors don't have them, not substantial ones at least. Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. You have a knack for exaggeration. :-p -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
Mirror backing
On Tue, 13 Nov 2012 11:34:24 -0600, -MIKE-
Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. You have a knack for exaggeration. :-p Well, after a nice long shower, the bathroom is filled with steam and people can't see where they're going. So naturally, he should protect against anyone reaching out and putting their hand through the mirror. :) |
Mirror backing
Dave wrote:
On Tue, 13 Nov 2012 11:34:24 -0600, -MIKE- Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. You have a knack for exaggeration. :-p Well, after a nice long shower, the bathroom is filled with steam and people can't see where they're going. So naturally, he should protect against anyone reaching out and putting their hand through the mirror. :) They shower in the living room? Kinky... -- -Mike- |
Mirror backing
On 11/13/12 12:06 PM, Dave wrote:
On Tue, 13 Nov 2012 11:34:24 -0600, -MIKE- Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. You have a knack for exaggeration. :-p Well, after a nice long shower, the bathroom is filled with steam and people can't see where they're going. So naturally, he should protect against anyone reaching out and putting their hand through the mirror. :) If you followed another recent thread on this very subject you'd see that I advocated a mirror backing for that very reason. Moot point in this matter, however. The exaggeration I thought was obvious to anyone reading, was the part about hacking ones hand off. -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
Mirror backing
On Tuesday, November 13, 2012 4:21:11 PM UTC-6, -MIKE- wrote:
If you followed another recent thread on this very subject .... Same thread, same poster, as on Oct 22nd. Maybe next month we'll get it again. That job should have been completed, already. Sonny |
Mirror backing
On 11/13/2012 1:06 PM, Dave wrote:
On Tue, 13 Nov 2012 11:34:24 -0600, -MIKE- Because if someone trips in the area, their hand going through the mirror would guarantee it being (neatly or nearly) hacked off if there were no backing. You have a knack for exaggeration. :-p Well, after a nice long shower, the bathroom is filled with steam and people can't see where they're going. So naturally, he should protect against anyone reaching out and putting their hand through the mirror. :) OP: Will the backer board protect me from someone behind the mirror reaching through and pulling me into their dimension?? This should be the last on this particular project. I am great full that I have all of you to assist with these projects, as it allows me to do thing I have never done before. To night I have all of the things necessary to install the mirror. However, I have a real bad head cold, the type that effect your equilibrium. Since this project is ladder work with a large mirror, I decided it would be best to wait until my equilibrium returns |
Mirror backing
"Mike Marlow" wrote in news:k7ub98$4t4$1
@dont-email.me: They shower in the living room? Kinky... Maybe it's a true one-room apartment. ;-) Puckdropper -- Make it to fit, don't make it fit. |
Mirror backing
On 11/13/12 6:07 PM, Sonny wrote:
On Tuesday, November 13, 2012 4:21:11 PM UTC-6, -MIKE- wrote: If you followed another recent thread on this very subject .... Same thread, same poster, as on Oct 22nd. Maybe next month we'll get it again. That job should have been completed, already. Sonny Supervisor Sonny! :-) -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
Mirror backing
Keith Nuttle wrote:
OP: Will the backer board protect me from someone behind the mirror reaching through and pulling me into their dimension?? No - however it has apparently already been determined that when they reach through, the mirror will shatter, and the shards will dismember them, making perhaps a bloody mess in the living room, but leaving you otherwise unscathed. To night I have all of the things necessary to install the mirror. However, I have a real bad head cold, the type that effect your equilibrium. Since this project is ladder work with a large mirror, I decided it would be best to wait until my equilibrium returns There is no such thing as equilibrium on a ladder... -- -Mike- |
Mirror backing
I would suggest cement board that is used in bathrooms and such.
Fiberglass and cement. Won't wiggle in water. Martin On 11/12/2012 3:55 PM, Keith Nuttle wrote: We are putting a 41" X 33" mirror in the tv hole above our fire place. The Mirror is 1/4" thick. The TV hole is standard framing 2x4 with header. The mirror would fit into the hole in the existing framing with the trim that was applied for the TV hole. The plan was to put a 1/2 inch sheet of plywood as a backer board for the mirror. The mirror and the backer board would be held against 1X2 frame attached to the trim of the existing TV hole. Today I went to get the wood to cut the 41X33 backer board from. I realized that even 3/4 plywood will warp not a good thing if the mirror is masticed to it. What would you recomend for a backer board? I have talked to several people with ideas all over the board. from sheet rock to no backer. |
Mirror backing
On 11/14/2012 10:04 PM, Martin Eastburn wrote:
I would suggest cement board that is used in bathrooms and such. Fiberglass and cement. Won't wiggle in water. Martin Since this mirror is over my fireplace it it is in the water, I have much bigger problems. |
Mirror backing
Where can I buy a black mirror backing 35"*35"
-- For full context, visit https://www.homeownershub.com/woodwo...ng-552824-.htm |
Mirror backing
On 2/21/2021 10:30 AM, Preston wrote:
Where can I buy a black mirror backing 35"*35" Glass shop. |
| All times are GMT +1. The time now is 10:36 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter