Are there 1/8" collets for Bosch PR20EVSK palm router
 

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
wrote:

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Why don't you ask Bosch?

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On Aug 18, 4:46*pm, Ignoramus28889 ignoramus28...@NOSPAM.
28889.invalid wrote:
I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

* * *http://www.amazon.com/dp/B000ANQHTA-- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Reducing sleeves.

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On 8/18/2010 6:39 PM, Gordon Shumway wrote:
On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
wrote:

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Why don't you ask Bosch?

For one thing, Bosch may not give a complete answer--they can tell you
if they make one but if you don't luck into the right guy you may not
find out about third party collets such as
http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp
or adapter bushings such as
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html.

Are there 1/8" collets for Bosch PR20EVSK palm router
 

Try this link:

http://www.mlcswoodworking.com/shops..._bearings.html


Adapter bushings for router colletts. I am not sure how close a tolerance
they have.
Lyndell


"Ignoramus28889" wrote in message
...
I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Are there 1/8" collets for Bosch PR20EVSK palm router
 

Subject

If you go the reducer bushing road, assume they are going to fail and
guard accordingly.

Lew

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On 2010-08-19, Lew Hodgett wrote:
Subject

If you go the reducer bushing road, assume they are going to fail and
guard accordingly.

I tend to believe this.

My intended use of this Colt was as a high speed spindle for my CNC
milling machine.

http://igor.chudov.com/projects/Brid...ct-2-CNC-Mill/

The idea was taken from this pictu

http://www.cnccookbook.com/img/Other...Manifold_1.jpg

I also have a Bosch 1613EVS router, but it seems to be harder to
mount.

i

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On Wed, 18 Aug 2010 19:30:17 -0400, "J. Clarke"
wrote:

On 8/18/2010 6:39 PM, Gordon Shumway wrote:
On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
wrote:

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Why don't you ask Bosch?

For one thing, Bosch may not give a complete answer--they can tell you
if they make one but if you don't luck into the right guy you may not
find out about third party collets such as
http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp
or adapter bushings such as
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html.


I agree. But if the OP would have DAGS you wouldn't have had to the
work for him.

Gordon Shumway

When you subsidize poverty and failure, you get more of both.

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On 2010-08-19, Gordon Shumway wrote:
On Wed, 18 Aug 2010 19:30:17 -0400, "J. Clarke"
wrote:

On 8/18/2010 6:39 PM, Gordon Shumway wrote:
On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
wrote:

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Why don't you ask Bosch?

For one thing, Bosch may not give a complete answer--they can tell you
if they make one but if you don't luck into the right guy you may not
find out about third party collets such as
http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp
or adapter bushings such as
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html.


I agree. But if the OP would have DAGS you wouldn't have had to the
work for him.

I submitted a question to Bosch online yesterday afternoon, and they
have not yet relpied.

i

Are there 1/8" collets for Bosch PR20EVSK palm router
 

On Thu, 19 Aug 2010 20:40:44 -0500, Ignoramus12820
wrote:

On 2010-08-19, Gordon Shumway wrote:
On Wed, 18 Aug 2010 19:30:17 -0400, "J. Clarke"
wrote:

On 8/18/2010 6:39 PM, Gordon Shumway wrote:
On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
wrote:

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Why don't you ask Bosch?

For one thing, Bosch may not give a complete answer--they can tell you
if they make one but if you don't luck into the right guy you may not
find out about third party collets such as
http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp
or adapter bushings such as
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html.


I agree. But if the OP would have DAGS you wouldn't have had to the
work for him.

I submitted a question to Bosch online yesterday afternoon, and they
have not yet relpied.

i

FYI: DAGS = Do A Google Search

Are there 1/8" collets for Bosch PR20EVSK palm router
 

"J. Clarke" wrote in message
...
On 8/18/2010 6:39 PM, Gordon Shumway wrote:
On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
wrote:

I am looking at this Bosch palm router for a certain application (high
speed spindle for a CNC milling machine).

http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router

And my question is, are there collets for 1/8" shank tools, that would
be compatible with this palm router.

Thanks

i

Why don't you ask Bosch?

For one thing, Bosch may not give a complete answer--they can tell you
if they make one but if you don't luck into the right guy you may not
find out about third party collets such as

http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp
or adapter bushings such as

http://www.mlcswoodworking.com/shops...ml/pages/bushi
ng_ball_bearings.html.

Thanks for your post: I learned something! I came to this group to glean
what I could.

woodstuff