What do you use for a deep clamp?
 

Just noticed some Irwin 9SP 9" locking C clamps (two per package
for $20 US) at the local mega hardware store, and grabbed them.
They have smaller Vise Grip handles and lighter duty clamp jaws
than the standard heavy-duty locking C clamp at the same store,
but the reach is 1 5/8" longer. Not massive clamping power, but
they work great as expected.

What do you use for a deep grip clamp?

What do you use for a deep clamp?
 

On Jun 27, 10:44*pm, John Doe wrote:
Just noticed some Irwin 9SP 9" locking C clamps (two per package
for $20 US) at the local mega hardware store, and grabbed them.
They have smaller Vise Grip handles and lighter duty clamp jaws
than the standard heavy-duty locking C clamp at the same store,
but the reach is 1 5/8" longer. Not massive clamping power, but
they work great as expected.

What do you use for a deep grip clamp?

I used to use a couple of these:
http://www.highlandwoodworking.com/P...mps/165461.jpg

Downside? $ 150.00 each. (Maybe better now, dunno.)

What do you use for a deep clamp?
 

Subject

I use cauls and standard depth clamps.

Lew

What do you use for a deep clamp?
 

On Sun, 27 Jun 2010 19:53:19 -0700 (PDT), Robatoy
wrote the following:

On Jun 27, 10:44*pm, John Doe wrote:
Just noticed some Irwin 9SP 9" locking C clamps (two per package
for $20 US) at the local mega hardware store, and grabbed them.
They have smaller Vise Grip handles and lighter duty clamp jaws
than the standard heavy-duty locking C clamp at the same store,
but the reach is 1 5/8" longer. Not massive clamping power, but
they work great as expected.

What do you use for a deep grip clamp?

I used to use a couple of these:
http://www.highlandwoodworking.com/P...mps/165461.jpg

Downside? $ 150.00 each. (Maybe better now, dunno.)

I used a pipe clamp and tubasixes to form up a concrete repair job for
a client's steps once. I cut it 3/4" too long and bend the tubasixes
with the clamp. Client was amazed and stated so with a kudo.
Cost: $6.99 for the Chiwanese clamp, $3.99 for the 4' pipe, scrap 2x6.
+
++
=======|================ tubasix
|| |--------------------|
|| | | |
|| | | |
|| | | step |
|| | | ___|
|| | | / | repair area
|| | | / |
=======|================ tubasix (top, bottom, left side)
+++
pipe clamp (vertical)

Otherwise, for deeper-than-bar-clamp depths, I usually use wooden
handscrews. http://fwd4.me/UkR

--
The most powerful factors in the world are clear ideas
in the minds of energetic men of good will.
-- J. Arthur Thomson

What do you use for a deep clamp?
 

On Jun 27, 11:26*pm, "Lew Hodgett" wrote:
Subject

I use cauls and standard depth clamps.

Lew

In my previous life as a countertop guy, I could not always do the
caul thing. A couple of those bessies saved my ass just enough times
to make them worth the money. I used them maybe a dozen times in a
decade... if that. (Handy when you have a warped flange on a stainless
sink, for instance. )

What do you use for a deep clamp?
 

On 6/27/2010 10:44 PM, John Doe wrote:
Just noticed some Irwin 9SP 9" locking C clamps (two per package
for $20 US) at the local mega hardware store, and grabbed them.
They have smaller Vise Grip handles and lighter duty clamp jaws
than the standard heavy-duty locking C clamp at the same store,
but the reach is 1 5/8" longer. Not massive clamping power, but
they work great as expected.

What do you use for a deep grip clamp?

Bessey medium duty malleable iron clamps give 4-1/2" or more (I've got
two that can go 7 inches, and they sell them up to 12). Irwin has
similar clamps that go 4-7/8. Jorgensen 4900s go up to 9 inches but
they aren't cheap.

When I need more than 7 inches though I usually pile some free weight
disks on it, or sometimes a bag of shot.

What do you use for a deep clamp?
 

In article ,
J. Clarke wrote:
On 6/27/2010 10:44 PM, John Doe wrote:
...snipped...
What do you use for a deep grip clamp?

http://www.harborfreight.com/12-inch...amp-45919.html


--
Better to be stuck up in a tree than tied to one.

Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar.org