DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   97524 Harbor Freight 2-in-1 18ga nailer / stapler (https://www.diybanter.com/woodworking/298740-97524-harbor-freight-2-1-18ga-nailer-stapler.html)

kansascats February 25th 10 04:55 AM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
Any opinions about this gun?

I have a PC 18ga 2" brad nailer and 15ga finish nailer. Both
excellent.

This HF gun was 17.99, and the stapler seemed like it might come in
handy some day.

Fastener capacity: Brad nails 1/2" to 2", Staples 3/4" to 1-1/2"


[email protected] February 25th 10 07:59 AM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
On Feb 24, 10:55*pm, kansascats wrote:
Any opinions about this gun?

I have a PC 18ga 2" brad nailer and 15ga finish nailer. *Both
excellent.

This HF gun was 17.99, and the stapler seemed like it might come in
handy some day.

Fastener capacity: Brad nails 1/2" to 2", Staples 3/4" to 1-1/2"


I have bought a couple of their brad guns for use when I had
employees. They were incredibly sturdy, and cheaper than buying a
rebuild kit for my Bostitch guns. (So I got the Bostitch, they go the
HF). They make excellent "standby" guns and shop guns.

BUT... this particular gun seems to be nothing but problems. I don't
have one as I already have a couple of small staplers. But three
different guys I know have bought them and said the jam like the
crazy, and while they aren't too bad to get back to work, they
described as little as 3 - 4 staples shot between jams.

As always, just my 0.02.

Robert

Puckdropper[_2_] February 25th 10 11:48 AM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
kansascats wrote in news:d8f4d014-d45d-4075-b897-
:

Any opinions about this gun?

I have a PC 18ga 2" brad nailer and 15ga finish nailer. Both
excellent.

This HF gun was 17.99, and the stapler seemed like it might come in
handy some day.

Fastener capacity: Brad nails 1/2" to 2", Staples 3/4" to 1-1/2"


Want one? Just pay shipping and I'll dig it out of the garage sale pile
for you. The gun often fails to advance the nails for the next firing,
and leaves a divot in the wood when it does so. (I was using the nails
that came with the kit.)

When it worked, it was nice. However, it hardly ever worked.

Puckdropper
--
Never teach your apprentice everything you know.

ocnmocn February 25th 10 03:45 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
I had one of these for a week. It wouldn't make it through 10 brads
without jamming. You have to take three hex screws out to clear a
jam. The next model up is only a brad nailer, but it has a quick
release top to clear jams. I've never had a jam with this better
model. But no staples.

David Nebenzahl February 25th 10 06:19 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
On 2/24/2010 8:55 PM kansascats spake thus:

Any opinions about this gun?

I have a PC 18ga 2" brad nailer and 15ga finish nailer. Both
excellent.

This HF gun was 17.99, and the stapler seemed like it might come in
handy some day.

Fastener capacity: Brad nails 1/2" to 2", Staples 3/4" to 1-1/2"


I have no direct knowledge of this tool, but I looked it up on the
Harbor Freight Reviews site (http://hfreviews.com/item.php?id=5415). The
two reviews there were positive, although the first complained that the
nailer left marks on the work, and the second pointed out that they only
used brand-name nails. So maybe the nails were the problem, not the nailer.


--
You were wrong, and I'm man enough to admit it.

- a Usenet "apology"

-MIKE- February 25th 10 06:34 PM

Freeman Air Nailers?
 
I've never heard of this brand, but woodcraft has this combo on sale for
80 bucks.

http://www.woodcraft.com/Product/2080422/29472/Freeman-Brad-Nailer-and-Micro-Pinner-Combo.aspx

Anyone familiar with Freeman?



--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply


Artemus[_4_] February 25th 10 08:40 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 

"kansascats" wrote in message
...
Any opinions about this gun?

I have a PC 18ga 2" brad nailer and 15ga finish nailer. Both
excellent.

This HF gun was 17.99, and the stapler seemed like it might come in
handy some day.

Fastener capacity: Brad nails 1/2" to 2", Staples 3/4" to 1-1/2"


I know 2 people who bought that POS. As others have said it
jams frequently and is a real pain to clear. Since you already have
an 18ga brad nailer why not just get the 1/4" stapler(97521). I
have one of them and it has been jam free for about 2,000 staples.
List is $20 but on sale it is a lot less.
Art



Swingman February 25th 10 11:39 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
On 2/25/2010 1:59 AM, wrote:

BUT... this particular gun seems to be nothing but problems. I don't
have one as I already have a couple of small staplers. But three
different guys I know have bought them and said the jam like the
crazy, and while they aren't too bad to get back to work, they
described as little as 3 - 4 staples shot between jams.


Among other brad nailers, I have a "Delta" brand 18ga bradder that also
shoots narrow (1/4") crown staples. Amazing how much use that gun gets.

--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)

Larry Jaques[_2_] February 26th 10 01:32 AM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
On Wed, 24 Feb 2010 23:59:26 -0800 (PST), the infamous
" scrawled the
following:

On Feb 24, 10:55*pm, kansascats wrote:
Any opinions about this gun?

I have a PC 18ga 2" brad nailer and 15ga finish nailer. *Both
excellent.

This HF gun was 17.99, and the stapler seemed like it might come in
handy some day.

Fastener capacity: Brad nails 1/2" to 2", Staples 3/4" to 1-1/2"


I have bought a couple of their brad guns for use when I had
employees. They were incredibly sturdy, and cheaper than buying a
rebuild kit for my Bostitch guns. (So I got the Bostitch, they go the
HF). They make excellent "standby" guns and shop guns.

BUT... this particular gun seems to be nothing but problems. I don't
have one as I already have a couple of small staplers. But three
different guys I know have bought them and said the jam like the
crazy, and while they aren't too bad to get back to work, they
described as little as 3 - 4 staples shot between jams.


I have the HF 18ga brad nailah, their 18ga 1/4" crown stapler/nailer,
their 1/2" crown stapler, and their 11ga framing nailer. The only time
I get apparent misfires whenever I forget to reload 'em. g The only
time I get real problems is when they're receiving less than 55psi of
air. I oil them (2 drops) about every two hours of use, a normal
month.

--
"Politics is the art of looking for trouble, finding it whether it
exists or not, diagnosing it incorrectly, and applying the wrong
remedy." -- Ernest Benn

[email protected] February 26th 10 07:37 AM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
On Feb 25, 5:39 pm, Swingman wrote:

Among other brad nailers, I have a "Delta" brand 18ga bradder that also
shoots narrow (1/4") crown staples. Amazing how much use that gun gets.


10,000 years ago when they came out with the dual purpose guns, I
never used one or had one that was reliable.

So I bought a brad gun, then a narrow crown stapler. It has installed
a few houses worth of soffit, and who knows how many backs on utility
cabinets. In a pinch (sorry paint guys....) I have used it to shoot
on paint grade door trim.

Good for some repairs, too. Those little staples hold a lot for their
small size.

Robert

Swingman February 26th 10 03:38 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
On 2/26/2010 1:37 AM, wrote:
On Feb 25, 5:39 pm, wrote:

Among other brad nailers, I have a "Delta" brand 18ga bradder that also
shoots narrow (1/4") crown staples. Amazing how much use that gun gets.


10,000 years ago when they came out with the dual purpose guns, I
never used one or had one that was reliable.

So I bought a brad gun, then a narrow crown stapler. It has installed
a few houses worth of soffit, and who knows how many backs on utility
cabinets. In a pinch (sorry paint guys....) I have used it to shoot
on paint grade door trim.

Good for some repairs, too. Those little staples hold a lot for their
small size.


Yep, at least two-fer-one holding power over a single brad.

Only paid what amounted to a HF throw-a-way price on the Delta dual at a
clearance somewhere and it's turned out to be a reliable staple gun.

Bought it for a very specific purpose ... generally use "vent skin"
construction on a house with siding and bought it to staple the 9"
screen insect barrier we run at the bottom of the 1 x 4 furring strips
on top of the sheathing. It's done two or three houses worth of that,
and I just used it to staple 100' 3x2 mesh on two chicken coops within
the last few weeks, and it still has yet to misfire a staple that I'm
aware of.

It does indeed misfire the occasional brad however, particularly when it
hits the interface between two sticks, or shoots a double, as Leon will
attest to, as we use it a lot to hold reinforcing "cleats" 'while the
glue dries' on the topside and underside of wall and base cabinets.

... and, on topic, there's that mostly reliable $14.95 HF brad nailer
that's still firing brads in the shop, at least 98% of the time, for
almost ten years. :)

--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)

kansascats February 27th 10 08:03 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
Well.. guess I'll pull it out of the box (no case with mine) and fire
a few rounds of staples that I bought. Since I have the PC 2" brad
nailer -- and don't ever recall a jam, I'll just test out the stable
functionality of the HF.

I have a HF 21 degree, 10 ga. framing nailer that works pretty well.
The real nuisance is that sometimes it double fires. I bought it
quite a few years ago -- didn't use it much until last fall when I
built a 8' x 8' shed. Partially my inexperience I'm sure, but I had
trouble getting a consistent drive depth, and as noted, the 1 out of
50 or so double fires. I wish I could just shut off it's ability to
do the fire w/o pulling the trigger another time.

kansascats February 27th 10 10:44 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
Results -- I fired 100 rounds of 1" staples
- no jams
- the depth seems a little inconsistent -- I was nailing pine to pine
and osb to osb. The depth adjustment was preset to a max and min. I
opened up the max and it would then drive below the surface -- however
that may have contributed to the next problem..
- the only issue I had was at times it did not "retract" -- if that
makes sense. It would fire.. but no not pull back the firing pin (or
whatever it's called). I pulled it apart a several times, oiled it up
good, and put about 5 total drops of oil in the air inlet. Not sure
if that fixed it or not -- but the problem went away.
- I did not fire any brads, only 1" staples

kansascats February 27th 10 11:05 PM

97524 Harbor Freight 2-in-1 18ga nailer / stapler
 
So out of curiosity -- when stapling -- how deep do you drive it? I
guess it depends on whether you want to break the surface of the
material -- or if you want the bottom of the staple to be flush with
the material.


All times are GMT +1. The time now is 07:18 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter