Hot melt glue gun of high quality
 

Have been using a cheap corded hot melt gun to attach templates for router
work the last couple of months. The hot melt works better than cold melt
because you get a few more precious seconds to glue the parameter and
position the template. However, the cord is ALWAYS in the way of moving
quickly.

Anyone with experience on a high quality cordless hot melt gun?

Thanks
Alan

Hot melt glue gun of high quality
 

I have never seen one... and hot melts tend to be high wattage units that
might suck a battery dry in a matter of a couple of minutes and that would
lead to premature battery failure IMHO.

"A Womack" wrote in message
...
Have been using a cheap corded hot melt gun to attach templates for router
work the last couple of months. The hot melt works better than cold melt
because you get a few more precious seconds to glue the parameter and
position the template. However, the cord is ALWAYS in the way of moving
quickly.

Anyone with experience on a high quality cordless hot melt gun?

Thanks
Alan

Hot melt glue gun of high quality
 

I have never seen one... and hot melts tend to be high wattage units that
might suck a battery dry in a matter of a couple of minutes and that would
lead to premature battery failure IMHO.

Weller and Bostik (among others) make propane-powered cordless glue guns.
They cost about $40-$50.

Hot melt glue gun of high quality
 

Ohhhh...


"mp" wrote in message ...
I have never seen one... and hot melts tend to be high wattage units
that
might suck a battery dry in a matter of a couple of minutes and that
would
lead to premature battery failure IMHO.

Weller and Bostik (among others) make propane-powered cordless glue guns.
They cost about $40-$50.

Hot melt glue gun of high quality
 

I have never seen one... and hot melts tend to be high wattage units that
might suck a battery dry in a matter of a couple of minutes and that would
lead to premature battery failure IMHO.


I have an old Craftsman glue gun that you plug in for a while until nice & hot
then the cord unplugs from the gun and works for quite a while before needing
plugged back in for reheating. Not really cordless, but it gets the cord out of
the way while using. No idea if this meets the OP's needs or if they are still
sold or even if all glue guns are this way. I seldom use the thing.

Dave Hall

Hot melt glue gun of high quality
 

On 31 Jan 2004 23:40:32 GMT, (David Hall) wrote:

I have an old Craftsman glue gun that you plug in for a while until nice & hot
then the cord unplugs from the gun and works for quite a while before needing
plugged back in for reheating.

Howdy,

I would wonder if it works properly for "quite a while."

I suspect that the glue is to be used at a particular temperature, and
clearly, the moment you would unplug the thing it would start to cool.

Of course I am not suggesting that it cools to a point that it cannot
be used, but it certainly is a possibility that the joints would not
be as strong.

All the best,

--
Kenneth

If you email... Please remove the "SPAMLESS."

Hot melt glue gun of high quality
 

On Sat, 31 Jan 2004 17:44:25 GMT, A Womack
wrote:

Have been using a cheap corded hot melt gun to attach templates for router
work the last couple of months. The hot melt works better than cold melt
because you get a few more precious seconds to glue the parameter and
position the template. However, the cord is ALWAYS in the way of moving
quickly.

Anyone with experience on a high quality cordless hot melt gun?

Thanks
Alan


http://shop.store.yahoo.com/tmt/gluegunby3m.html

I bought this when I first started doing Corian. It costs a lot of
money but it has done a lot of work for a lot of years and runs just
as good as the day I bought it.

There are many kinds of glue sticks available for this that are not
available for hobby type guns.


Thomas J. Watson-Cabinetmaker (ret)
Real Email is: tjwatson1ATcomcastDOTnet
Website: http://home.comcast.net/~tjwatson1

Hot melt glue gun of high quality
 

hang the cord from the ceiling directly above your position.

--

http://users.adelphia.net/~kyhighland


"A Womack" wrote in message
...
Have been using a cheap corded hot melt gun to attach templates for router
work the last couple of months. The hot melt works better than cold melt
because you get a few more precious seconds to glue the parameter and
position the template. However, the cord is ALWAYS in the way of moving
quickly.

Anyone with experience on a high quality cordless hot melt gun?

Thanks
Alan

Hot melt glue gun of high quality
 

the use was for attaching templates that would be removed after routing, a
strong joint wasn't an issue.

--

http://users.adelphia.net/~kyhighland


"Kenneth" wrote in message
...
On 31 Jan 2004 23:40:32 GMT, (David Hall) wrote:

I have an old Craftsman glue gun that you plug in for a while until nice
& hot
then the cord unplugs from the gun and works for quite a while before
needing
plugged back in for reheating.

Howdy,

I would wonder if it works properly for "quite a while."

I suspect that the glue is to be used at a particular temperature, and
clearly, the moment you would unplug the thing it would start to cool.

Of course I am not suggesting that it cools to a point that it cannot
be used, but it certainly is a possibility that the joints would not
be as strong.

All the best,

--
Kenneth

If you email... Please remove the "SPAMLESS."

Hot melt glue gun of high quality
 

Hi,
I've got a similar glue gun, but it's not a Craftsman. Bought 5 years ago
at a local craft shop. I think even 2 minutes would be stretching the time
it keeps the glue at a good working temperature, but it would work fine to
unplug and then immediately glue a template to a workpiece. Just plug it
back in for a minute or two while you get the next template and workpiece
ready, and you're good to go again. Oh, and it's a trigger model -- that's a
must-have feature, you don't want the kind that makes you shove the glue
stick in with your thumb.
Lewis


"KYHighlander" wrote in message
...
the use was for attaching templates that would be removed after routing, a
strong joint wasn't an issue.

--

http://users.adelphia.net/~kyhighland


"Kenneth" wrote in message
...
On 31 Jan 2004 23:40:32 GMT, (David Hall) wrote:

I have an old Craftsman glue gun that you plug in for a while until
nice
& hot
then the cord unplugs from the gun and works for quite a while before
needing
plugged back in for reheating.

Howdy,

I would wonder if it works properly for "quite a while."

I suspect that the glue is to be used at a particular temperature, and
clearly, the moment you would unplug the thing it would start to cool.

Of course I am not suggesting that it cools to a point that it cannot
be used, but it certainly is a possibility that the joints would not
be as strong.

All the best,

--
Kenneth

If you email... Please remove the "SPAMLESS."