brad point vs twist point
 

what is the different application? woodcrafters is having a sale and I am
interested just not sure which to get or get both sets. thanks

brad point vs twist point
 

"Paul Fisher" wrote in message
m...
what is the different application? woodcrafters is having a sale and I am
interested just not sure which to get or get both sets. thanks


Brad point drill bits leave a flat bottomed hole and clean edge at the entry
point. They are particularly good if you want to plug the holes to cover
screw heads or a recess fro Euro hinges. Good do hot out a mortise also. I
use them much more for wood than twist drill. They are useless on metal
though.

brad point vs twist point
 

"Paul Fisher" wrote in message
m...
what is the different application? woodcrafters is having a sale and I am
interested just not sure which to get or get both sets. thanks
Correct, not for metal. It's a good buy, picked up a box last year, on
sale. They won't walk off like a twist point can, like when using a hand
drill....

brad point vs twist point
 

On Feb 4, 4:12 am, "Paul Fisher" wrote:
what is the different application? woodcrafters is having a sale and I am
interested just not sure which to get or get both sets. thanks

Brad point makes a cleaner entry and exit and doesn't slide off the
mark.

Regular will self-center if you need to enlarge a hole and is easier
to resharpen.


-Kevin

brad point vs twist point
 

On Feb 4, 3:38*am, "Rick Samuel"
wrote:
[about brad point drill bits]

*Correct, not for metal. *It's a good buy, picked up a box last year, on
sale. *They won't walk off like a twist point

While they may not be intended for metal, brad point bits are nicely
suited to soft (aluminum or copper) metal sheet drilling; the
holes are much neater than with standard drills. On full
thickness metals, or brass, they don't work as well.

brad point vs twist point
 

On Feb 7, 3:43*pm, whit3rd wrote:
On Feb 4, 3:38*am, "Rick Samuel"
wrote:
[about brad point drill bits]



*Correct, not for metal. *It's a good buy, picked up a box last year, on
sale. *They won't walk off like a twist point

While they may not be intended for metal, brad point bits are nicely
suited to soft (aluminum or copper) metal sheet drilling; the
holes are much neater than with standard drills. * On full
thickness metals, or brass, they don't work as well.

There are brad point bits, and there are brad point bits.

Sheet metal workers often ground their own brad point bits. Typical
general purpose metal bits are ground at 59 degrees, so that the angle
between the cutting edges is 118 degrees. The sheet metal bits were
ground with an angle between the cutting edges of maybe 140 degrees,
but in the other direction, and with a brad point in the center. The
point centered the bit and the edges scored the circle. They work a
lot better than regular metal cutting bits, which don't cut round
holes in thin materials. Some of the woodworking brad point bits sold
today are of this type.

The other type of brad point bits are for woodworking only. The
cutting edges are ground at around 180 degrees, but spurs are left at
the outer edges. The spurs cut cleaner in wood than the sheet metal
bits do. They are more delicate, though, and I wouldn't use them in
metal.

John Martin