Where to Get the Key for Keyway in Motor Shaft?
 

I have a Craftsman contractor style tablesaw. Recently I lost the key
that is supposed to be placed in the keyway of the motor shaft. This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. Is it a very
common part?

Thanks in advance for any info.

Jay Chan

Where to Get the Key for Keyway in Motor Shaft?
 

Woodruff keys are usually generic. I can find an assortment of sizes at Ace
Hardware.

Where to Get the Key for Keyway in Motor Shaft?
 

Jay,

Try your local ACE or other hardware store. Mine sells them and we're
a small little
town with lots of farmers nearby. I suspect you should avoid the big
box guys.
Go where they sell nails by the pound.

MJM

On Nov 12, 5:25*pm, Jay Chan wrote:
I have a Craftsman contractor style tablesaw. *Recently I lost the key
that is supposed to be placed in the keyway of the motor shaft. *This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. *Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. *I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. *Is it a very
common part?

Thanks in advance for any info.

Jay Chan

Where to Get the Key for Keyway in Motor Shaft?
 

Jay Chan wrote:
I have a Craftsman contractor style tablesaw. Recently I lost the
key
that is supposed to be placed in the keyway of the motor shaft.
This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. Is it a very
common part?

Thanks in advance for any info.

If you're in the US go by any Harbor Freight and get their Keystock
Storehouse #93199 or #95843 for about 6 bucks. Should be one in it
that is either the right size or can be easily made to fit with a few
minutes filing or dremeling.

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)

Where to Get the Key for Keyway in Motor Shaft?
 

"Jay Chan" wrote

I would like to know where and how to get that key. Is it a very
common part?

It is very common. A;most any industrial supplier or bearing house will have
them. Just bring the pulley in and they will match it.

Where to Get the Key for Keyway in Motor Shaft?
 

Jay Chan wrote:
I have a Craftsman contractor style tablesaw. Recently I lost the key
that is supposed to be placed in the keyway of the motor shaft. This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. Is it a very
common part?

Thanks in advance for any info.

Jay Chan

Jay

If all else fails take the model number of the saw to Sears and order a
replacement key. Might cost more but it will be the right one.

Maybe ;^).

Dave Nagel

Where to Get the Key for Keyway in Motor Shaft?
 

On Nov 12, 8:25*pm, Jay Chan wrote:
I have a Craftsman contractor style tablesaw. *Recently I lost the key
that is supposed to be placed in the keyway of the motor shaft. *This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. *Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. *I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. *Is it a very
common part?

Thanks in advance for any info.

Jay Chan

Thanks for everyone who has replied. I will remove the pulley from
the tablesaw and bring it to ACE to find a matching key. I will let
you know how this goes.

I cannot go to Sears to get a replacement part because that part
doesn't have a part number. The advice from Sears PartDirect customer
service is to order the pulley and hope that the pulley comes with the
key. She was not sure either. Obviously I didn't order it.

Jay Chan

Where to Get the Key for Keyway in Motor Shaft?
 

Jay Chan wrote:
On Nov 12, 8:25 pm, Jay Chan wrote:
I have a Craftsman contractor style tablesaw. Recently I lost the key
that is supposed to be placed in the keyway of the motor shaft. This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. Is it a very
common part?

Thanks in advance for any info.

Jay Chan

Thanks for everyone who has replied. I will remove the pulley from
the tablesaw and bring it to ACE to find a matching key. I will let
you know how this goes.

I cannot go to Sears to get a replacement part because that part
doesn't have a part number. The advice from Sears PartDirect customer
service is to order the pulley and hope that the pulley comes with the
key. She was not sure either. Obviously I didn't order it.

Jay Chan

The Sears customer rep is giving the usual helpful information they
always give.

There should be an expoloded view of the saw that should show the key
and keyway. There will be a table of components with the view. The Sears
idiot should be able to obtain the part number from this list.

Remember I said SHOULD, with Sears that doesn't always mean COULD.

Dave

Where to Get the Key for Keyway in Motor Shaft?
 

"David G. Nagel" wrote in message
...


There should be an expoloded view of the saw that should show the key and
keyway. There will be a table of components with the view. The Sears idiot
should be able to obtain the part number from this list.

Remember I said SHOULD, with Sears that doesn't always mean COULD.


No point in wasting all of that time. A key is a key. Any hardware store
will carry it. Just take the pulley in hand and pick one out that fits the
keyway. There is nothing unique or special about the key Sears would
provide.

--

-Mike-

Where to Get the Key for Keyway in Motor Shaft?
 

"Mike Marlow" wrote in message
There is nothing unique or special about the key Sears would provide.


It would have the Craftsman logo and retail for $9.95 but be on sale for
$7.95.

Where to Get the Key for Keyway in Motor Shaft?
 

"Ed Pawlowski" wrote in message
...

"Mike Marlow" wrote in message
There is nothing unique or special about the key Sears would provide.


It would have the Craftsman logo and retail for $9.95 but be on sale for
$7.95.

And it would be out of stock. And the sales folks would have no idea what
it is or what it does.

Where to Get the Key for Keyway in Motor Shaft?
 

Lee Michaels wrote:
"Ed Pawlowski" wrote in message
...
"Mike Marlow" wrote in message
There is nothing unique or special about the key Sears would provide.

It would have the Craftsman logo and retail for $9.95 but be on sale for
$7.95.

And it would be out of stock. And the sales folks would have no idea what
it is or what it does.


And there would four of them hanging on a peg, behind dryer exhaust hose
clamps, in the appliance section.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply

Where to Get the Key for Keyway in Motor Shaft?
 

On Nov 13, 11:38*am, Jay Chan wrote:
On Nov 12, 8:25*pm, Jay Chan wrote:

I have a Craftsman contractor style tablesaw. *Recently I lost the key
that is supposed to be placed in the keyway of the motor shaft. *This
key is a small metal bar, and is ued to lock the motor shaft and the
pulley together. *Unfortunately, the parts list of the tablesaw
doesn't have a part number for this part. *I have called the Sears
PartDirect; but they don't have any info about it either.

I would like to know where and how to get that key. *Is it a very
common part?

Thanks in advance for any info.

Jay Chan

Thanks for everyone who has replied. *I will remove the pulley from
the tablesaw and bring it to ACE to find a matching key. *I will let
you know how this goes.

I cannot go to Sears to get a replacement part because that part
doesn't have a part number. *The advice from Sears PartDirect customer
service is to order the pulley and hope that the pulley comes with the
key. *She was not sure either. *Obviously I didn't order it.

Jay Chan

I have got a replacement key from ACE, and installed it in my
tablesaw. It works fine now. Thanks for people here giving me the
direction.

Jay Chan