Wilton vise parts
 

Does anyone have any idea how to obtain parts for a Wilton woodworking vise?
I have done several searches and only come up is retailers. The half (quick
release nut) on my vise is shot and need to replace it.

Any ideas will be appreciated.

Joe

Wilton vise parts
 

JOE MOHNIKE wrote:
Does anyone have any idea how to obtain parts for a Wilton woodworking vise?
I have done several searches and only come up is retailers. The half (quick
release nut) on my vise is shot and need to replace it.

Any ideas will be appreciated.

Joe



Try:

http://www.wiltontool.com/

--
Jack Novak
Buffalo, NY - USA

Wilton vise parts
 

JOE MOHNIKE wrote:
Does anyone have any idea how to obtain parts for a Wilton
woodworking vise? I have done several searches and only come up is
retailers. The half (quick release nut) on my vise is shot and need
to replace it.

Any ideas will be appreciated.

Try
http://www.grainger.com/Grainger/rp_...chType=product.

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)

Wilton vise parts
 

In article ,
JOE MOHNIKE wrote:
Does anyone have any idea how to obtain parts for a Wilton woodworking vise?
I have done several searches and only come up is retailers. The half (quick
release nut) on my vise is shot and need to replace it.

Any ideas will be appreciated.

Joe



If it is of fairly recent manufature try Grainger Parts 888 361 8649 or
http://www.grainger.com/Grainger/rp_...home.jsp?xi=xi


--
When the game is over, the pawn and the king are returned to the same box.

Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar.org

Wilton vise parts
 

Someone, who had an old vise, sent me their email add. requesting a photo my
disabled hunk of iron, as they had several old vises and may have the part
that I need. Unfortunatly I can not locate the address, but I do have the
pick. If they happen to read this post, I would very much appreciated it if
they could re-send me the address.
My appoloby for being a Klutz

Joe
"JOE MOHNIKE" wrote in message
...
Does anyone have any idea how to obtain parts for a Wilton woodworking
vise? I have done several searches and only come up is retailers. The
half (quick release nut) on my vise is shot and need to replace it.

Any ideas will be appreciated.

Joe

Wilton vise parts
 

JOE MOHNIKE wrote:
Someone, who had an old vise, sent me their email add. requesting a photo my
disabled hunk of iron, as they had several old vises and may have the part
that I need. Unfortunatly I can not locate the address, but I do have the
pick. If they happen to read this post, I would very much appreciated it if
they could re-send me the address.
My appoloby for being a Klutz

Joe
"JOE MOHNIKE" wrote in message
...
Does anyone have any idea how to obtain parts for a Wilton woodworking
vise? I have done several searches and only come up is retailers. The
half (quick release nut) on my vise is shot and need to replace it.

Any ideas will be appreciated.

Joe





Joe;

While researching for someone who has a Jet Table Saw I discovered that
WMH Tool Group, 2420 Vantage DR, Elbin, IL 60123 Ph: 1-800-274-6848
Http://www.wmhtoolgroup.com also handles Wilton.

They say that if you don't find what you want on line to give them a
phone call.

Hopes this helps

Dave N