Hello Group,
I have two router issue questions and will post the second question
after this.
Okay, I want to shape the legs of my cherry chairs using a pattern bit
and template. The stock is 1&1/2 inch , the template is 1/4 inch
beaver board (at least that what my Dad called it back in the 60's)
and I have a 2 inch straight bit with the bearing on the end. Would
you use this bit or would you use a 1&1/2 inch bit with the bearing
mouted near the collet instead of on the end? Even if I had a 1&1/2
inch bit with the bearing on the end would that make any difference?
Thanks in advance for your suggestions,
Marc