Rockwell International 46-111 wood lathe value
 

I was wondering if someone could let me know what a Rockwell Inter.
46-111 wood lathe is worth. The prices that I have found are from a
1973 catalog, the lathe was $139.99, the lathe and stand was $199.99
and a 1/2 hp motor was $64.99. I haven't seen the lathe yet so don't
know the condition so I am figuring avarage condition for everything,
the prices that I come to are, lathe and stand: $75, motor: $15.00,
tools: $5.00 all totalling $95.00. Is that a fare price or should I
figure in something else? The seller is asking $350.

Rockwell International 46-111 wood lathe value
 

On Jan 29, 11:03 am, mountainGJ wrote:
I was wondering if someone could let me know what a Rockwell Inter.
46-111 wood lathe is worth.

SNIP

Is that a fare price or should I
figure in something else? The seller is asking $350.

I personally wouldn't touch that lathe for that price. You would get
great utility value out of that lathe for $150... but I wouldn't pay
more. It has a small (low torque) motor, very small swing (turnable
diameter over the ways) and is not made for much more than light
spindle turning. The castings, although nicely finished, are
lightweight and prone to flex. Can you tell I have some personal
experience with this lathe?

It was a nice little lathe in its time, but it is simply too light
weight for someone that wants to really get out and turn all manner of
things on a lathe.

I think your money would be better spent with a Jet mini or something
similar, and you will still have some money left out of the $350
asking price to buy some more tools.

Robert

Rockwell International 46-111 wood lathe value
 

mountainGJ wrote:
I was wondering if someone could let me know what a Rockwell Inter.
46-111 wood lathe is worth. The prices that I have found are from a
1973 catalog, the lathe was $139.99, the lathe and stand was $199.99
and a 1/2 hp motor was $64.99. I haven't seen the lathe yet so don't
know the condition so I am figuring avarage condition for everything,
the prices that I come to are, lathe and stand: $75, motor: $15.00,
tools: $5.00 all totalling $95.00. Is that a fare price or should I
figure in something else? The seller is asking $350.

Although I haven't seen that lathe for
sale, there were two locally that you
can browse the ads for. Maybe that'll
give you some basis of comparison. These
ads are from Ottawa Canada.

http://ottawa.kijiji.ca/c-buy-and-se...QAdIdZ32975142
and
http://ottawa.kijiji.ca/c-buy-and-se...QAdIdZ35683669

The second one has some tools included.

--
Tanus

This is not really a sig.

http://www.home.mycybernet.net/~waugh/shop/

Rockwell International 46-111 wood lathe value
 

On Jan 29, 5:19 pm, Tanus wrote:
:
http://ottawa.kijiji.ca/c-buy-and-se...Rockwell-Wood-...
andhttp://ottawa.kijiji.ca/c-buy-and-sell-tools-equipment-Rockwell-woodw...

The second one has some tools included.

I would sure take another look at that first one. It is a dead ringer
for the 46-111. It may be a variant, but that is essentially the same
lathe.

The reason you don't see that old lathe anymore is that they quit
making them about 30 years ago when Rockwell got out of the medium
sized shop tools and went to a mix of all professional heavy duty
tools, and all consumer junk.

Robert

Rockwell International 46-111 wood lathe value
 

On Jan 29, 8:37*pm, "
wrote:
On Jan 29, 5:19 pm, Tanus wrote:
:

http://ottawa.kijiji.ca/c-buy-and-se...Rockwell-Wood-...
andhttp://ottawa.kijiji.ca/c-buy-and-sell-tools-equipment-Rockwell-woodw....

The second one has some tools included.

I would sure take another look at that first one. *It is a dead ringer
for the 46-111. *It may be a variant, but that is essentially the same
lathe.

The reason you don't see that old lathe anymore is that they quit
making them about 30 years ago when Rockwell got out of the medium
sized shop tools and went to a mix of all professional heavy duty
tools, and all consumer junk.

Robert

Thank you for your suggestions and input. I really appreciate it. I
think, unless the seller comes down with his asking price to around
$100, I'm going to look elsewhere. I'm new to using lathes and don't
have a lot of money but I also don't want to pay $350 for something
that is over 30 years old and possibly a piece of junk.

Thanks again,
Gary

Rockwell International 46-111 wood lathe value
 

On Jan 30, 8:56 am, mountainGJ wrote:

SNIP

Gary - I am sure we are all glad to help as we can. But if you are
still following this, get over to the woodturning newsgroup:

rec.crafts.woodturning

It is carried by just about everyone and is dedicated to turning. The
archives are great and are easily searchable with Google.

Robert

Rockwell International 46-111 wood lathe value
 

On Jan 30, 10:51*am, "
wrote:
On Jan 30, 8:56 am, mountainGJ wrote:

SNIP

Gary - I am sure we are all glad to help as we can. *But if you are
still following this, get over to the woodturning newsgroup:

* rec.crafts.woodturning

It is carried by just about everyone and is dedicated to turning. *The
archives are great and are easily searchable with Google.

Robert

Thank your the heads up. At your suggestion I am now a subscriber ot
rec.crafts.woodturning. I'll look around and see what I can find.

Gary

Rockwell International 46-111 wood lathe value
 

replying to mountainGJ, wood turner wrote:
I know that this comment was posted a while ago but do you by any chance still
have your 46-111 lathe and the parts to it? Or if you don't have it do you
know anybody who has replacement parts? Thanks

--
for full context, visit https://www.homeownershub.com/woodwo...ue-411466-.htm

Rockwell International 46-111 wood lathe value
 

replying to wood turner, Woodworker's Daughter wrote:
We do. Still researching the lathe and all the parts, tools, etc. From dad's
workshop.

--
for full context, visit https://www.homeownershub.com/woodwo...ue-411466-.htm

Rockwell International 46-111 wood lathe value
 

replying to wood turner, Tommullins12 wrote:
I do i have an original i want off my hands.. No stand or motor. But you can
have the rest for 80 bucks out the door. or 7403619414..
Look forward to your business

--
for full context, visit https://www.homeownershub.com/woodwo...ue-411466-.htm

Rockwell International 46-111 wood lathe value
 

Do you still have the Rockwell Delta 111 lathe you want to sell? You can reply to me at or phone 575 536-9749. Thanks, Dean

--
For full context, visit https://www.homeownershub.com/woodwo...ue-411466-.htm

Rockwell International 46-111 wood lathe value
 

On Sun, 6 Sep 2020 23:30:04 +0000, BRA
wrote:

Do you still have the Rockwell Delta 111 lathe you want to sell? You can reply to me at or phone 575 536-9749. Thanks, Dean

At some twelve years down the road, I do not think putting my phone
number on usenet (which Homeowners hub use as free content) is a smart
thing to do.

Rockwell International 46-111 wood lathe value
 

On Tuesday, January 29, 2008 at 11:03:08 AM UTC-6, mountainGJ wrote:
I was wondering if someone could let me know what a Rockwell Inter.
46-111 wood lathe is worth. The prices that I have found are from a
1973 catalog, the lathe was $139.99, the lathe and stand was $199.99
and a 1/2 hp motor was $64.99. I haven't seen the lathe yet so don't
know the condition so I am figuring avarage condition for everything,
the prices that I come to are, lathe and stand: $75, motor: $15.00,
tools: $5.00 all totalling $95.00. Is that a fare price or should I
figure in something else? The seller is asking $350.

IF I were going to spend $350 on 47yr old lathe, I think I would put another $50 with it and go for the Harbor Freight Jet 1242 knock off. I have had that lathe and its serviceable. If you happen to get one of their 25% off coupons, that drops the price to around $300. BTW, that $265 in 1973 (lathe, stand and motor) would be $1,546.00 today.