Where to buy (not build) dust collector without bags
 

I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside. So, I don't need the big high
micron filtration bags or the associated hardware. Where do I find
the dust collector part only?

Thanks..........russ

Where to buy (not build) dust collector without bags
 

"Russ" wrote in message
...
I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside. So, I don't need the big high
micron filtration bags or the associated hardware. Where do I find
the dust collector part only?

Thanks..........russ


http://www.oneida-air.com/newsite/index.php

Where to buy (not build) dust collector without bags
 

I don't think you'll get sufficient suction without the resistance provided
by bags/filters.

Woody

"Leon" wrote in message
...

"Russ" wrote in message
...
I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside. So, I don't need the big high
micron filtration bags or the associated hardware. Where do I find
the dust collector part only?

Thanks..........russ


http://www.oneida-air.com/newsite/index.php

Where to buy (not build) dust collector without bags
 

On Thu, 6 Dec 2007 06:18:19 -0800 (PST), Russ
wrote:

I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside. So, I don't need the big high
micron filtration bags or the associated hardware. Where do I find
the dust collector part only?

Thanks..........russ


a point to concider!! you will also be exausting your heat and air
conditioning [ if you have it ] to the outside. also concider the
people living next door when the wind is blowing? sawdust all over
their new lexus might cause problems! you could use the bags that come
with the DC and build a small shed around it to keep the whether out.
just some thoughts!! :-]

Where to buy (not build) dust collector without bags
 

"woodman" wrote in message
news:4lV5j.3913$UG1.1653@trnddc01...
I don't think you'll get sufficient suction without the resistance provided
by bags/filters.


That would be incorrect, in fact the suction would be greater and
non-deteriorating.

Where to buy (not build) dust collector without bags
 

Russ wrote:
I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside. So, I don't need the big high
micron filtration bags or the associated hardware. Where do I find
the dust collector part only?

Thanks..........russ

Google for centrifugal (squirrel cage) fan. Grainger would be a good
place to browse too.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Where to buy (not build) dust collector without bags
 

Where do you live? There may be codes against pumping sawdust out like
that.
You are talking about an exterior cyclone system which can be placed outside
however, I recommend using a collection barrel on the cyclone vs pumping
sawdust into the open. Try pennstate industries for equipment and supplies.

Roger
"Russ" wrote in message
...
I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside. So, I don't need the big high
micron filtration bags or the associated hardware. Where do I find
the dust collector part only?

Thanks..........russ

Where to buy (not build) dust collector without bags
 

On Thu, 6 Dec 2007 06:18:19 -0800 (PST), Russ
wrote:

I want to buy a 2hp+ dust collector, put it outside my shop, and
exhaust the sawdust to the outside.

Don't forget the makeup air.