Hoping the glue holds
 

I hosed a up a delicate piece of oak I was working on with the jigsaw. The
cut is fine, but as I was making it the slim section I was working on just
fell off - like it'd been cut by an inviisible blade. Hacked me off, as it
was my own fault for not supporting it well enough. Very VERY clean break,
smoother than a baby's bottom but I'm wondering if I need to do anything
with both ends before glueing it together and praying it will hold.

Do I need to allow for expansion in the glue when I attempt to assemble the
pieces or will the glue not add any appreciable dimension to the joint?
Presumably I won't be slathering it on like peanut butter.

Hoping the glue holds
 

"Eigenvector" wrote in message
. ..
I hosed a up a delicate piece of oak I was working on with the jigsaw. The
cut is fine, but as I was making it the slim section I was working on just
fell off - like it'd been cut by an inviisible blade. Hacked me off, as it
was my own fault for not supporting it well enough. Very VERY clean break,
smoother than a baby's bottom but I'm wondering if I need to do anything
with both ends before glueing it together and praying it will hold.

Do I need to allow for expansion in the glue when I attempt to assemble
the pieces or will the glue not add any appreciable dimension to the
joint? Presumably I won't be slathering it on like peanut butter.
You might try a drop of super glue on the ends and yellow glue in between,
the theory that the super glue will hold it until the yellow glue dries. I
would practice on a scrap first.

Hoping the glue holds
 

"Lowell Holmes" wrote in message
news:aU8ui.1910$MT3.1593@trnddc05...

"Eigenvector" wrote in message
. ..
I hosed a up a delicate piece of oak I was working on with the jigsaw.
The cut is fine, but as I was making it the slim section I was working on
just fell off - like it'd been cut by an inviisible blade. Hacked me off,
as it was my own fault for not supporting it well enough. Very VERY clean
break, smoother than a baby's bottom but I'm wondering if I need to do
anything with both ends before glueing it together and praying it will
hold.

Do I need to allow for expansion in the glue when I attempt to assemble
the pieces or will the glue not add any appreciable dimension to the
joint? Presumably I won't be slathering it on like peanut butter.
You might try a drop of super glue on the ends and yellow glue in between,
the theory that the super glue will hold it until the yellow glue dries. I
would practice on a scrap first.
Got plenty of that - scrap that is. I'll get to it then.

Hoping the glue holds
 

Eigenvector wrote:
I hosed a up a delicate piece of oak I was working on with the
jigsaw. The cut is fine, but as I was making it the slim section I
was working on just fell off - like it'd been cut by an inviisible
blade. Hacked me off, as it was my own fault for not supporting it
well enough. Very VERY clean break, smoother than a baby's bottom
but I'm wondering if I need to do anything with both ends before
glueing it together and praying it will hold.

Are you saying it broke across the length and you want to butt the
ends together? If so, gluing won't work if the joint ever has any
stress. OTOH, if the break is with the grain, glue away. Masking
tape works well for pulling one piece against another and clamping.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Hoping the glue holds
 

On Tue, 7 Aug 2007 18:02:52 -0700, "Eigenvector"
wrote:

Do I need to allow for expansion in the glue when I attempt to assemble the
pieces or will the glue not add any appreciable dimension to the joint?
Presumably I won't be slathering it on like peanut butter.

Seriously, depending on the size of the pieces you're talking about,
I'd try to put in a pin of some sort to keep it together. I did this
a while back when I was repairing a piece of my wife's sculpture that
the cat knocked onto the floor, glue wouldn't hold it, just looking at
it funny would make the piece fall off, but I took a brad, cut off the
end, drilled a tiny hole into each end and then re-glued and now...
you couldn't take it off with less than a hammer.