Advice needed ASAP - bed riser construction
What about 3/4 ply, the good stuff, and set on edge cross-lapped. Built like a
tic-tac-toe board, the cells could later hold drawers, etc.. Dust ruffle, hee-hee! Tom (Bearcat) wrote: My wife is out of town, due back this evening, and I just realized that this would be a great time for me to do a project she's wanted me to do and surprise her with it. Due to the time constraints, I'm hoping some of the more experienced people her in the newsgroup can give me some quick advice so that I can whip this together after work. What I need to do is pretty simple - we've stayed a bed & breakfast places where the beds were higher than what we have at home. She'd like me to raise our bed, and I think that a wooden riser between the bedframe and the box springs would be the simplest thing. It's a king bed, I'd like to raise it 18" and I'm guessing I should make the platform in two pieces for ease of getting it in and out, so that means 39" x 80" x 18". Since it'll all be covered by a longer dust ruffle, it doesn't have to be pretty, just functional. What I don't know is how strong I need to build this, and what I need to do to avoid the platform squeeking or working loose later. It will have to stand up to kids jumping on it, etc. ;) so it has to be sturdy. I'm assuming just an open framework would work, I know my wife likes to keep things under the bed and would like to still be able to get at them. What material would you suggest (are 2"x4"s stout enough?) What sort of construction techniques would you recommend? Of course, any other suggestions are welcome (I've looked for a premade frame that would raise the existing bed and haven't found one). Someday, it'll all be over.... |
Advice needed ASAP - bed riser construction
http://shop.store.yahoo.com/bedbathstore/bedrisers.html
"Bearcat" wrote in message om... My wife is out of town, due back this evening, and I just realized that this would be a great time for me to do a project she's wanted me to do and surprise her with it. Due to the time constraints, I'm hoping some of the more experienced people her in the newsgroup can give me some quick advice so that I can whip this together after work. What I need to do is pretty simple - we've stayed a bed & breakfast places where the beds were higher than what we have at home. She'd like me to raise our bed, and I think that a wooden riser between the bedframe and the box springs would be the simplest thing. It's a king bed, I'd like to raise it 18" and I'm guessing I should make the platform in two pieces for ease of getting it in and out, so that means 39" x 80" x 18". Since it'll all be covered by a longer dust ruffle, it doesn't have to be pretty, just functional. What I don't know is how strong I need to build this, and what I need to do to avoid the platform squeeking or working loose later. It will have to stand up to kids jumping on it, etc. ;) so it has to be sturdy. I'm assuming just an open framework would work, I know my wife likes to keep things under the bed and would like to still be able to get at them. What material would you suggest (are 2"x4"s stout enough?) What sort of construction techniques would you recommend? Of course, any other suggestions are welcome (I've looked for a premade frame that would raise the existing bed and haven't found one). Thanks in advance! Barrett |
Advice needed ASAP - bed riser construction
I just made a particle board box to set on the frame under the mattress.
Actually it resembles a bookcase laying on the frame with its back up. I used two bed ruffles. One on the box and one on the boxsprings. Queen bed. When I did the king bed I built a box that went to the floor and skipped the bed frame. I stapled one ruffle to the box and put the other over the box spring. Particle board is cheap and plenty strong for this job and no one is ever going to see them. |
All times are GMT +1. The time now is 03:33 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter