new to wood working
 

Help
I am new to wood working and the project I am making states to cut the
wood at a 1/8 inch off-set. How do I make this cut with a table saw?

new to wood working
 

wrote:

| I am new to wood working and the project I am making states to cut
| the wood at a 1/8 inch off-set. How do I make this cut with a table
| saw?

More information please. Can/would you describe what the finished cut
is supposed to look like?

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/solar.html

new to wood working
 

new to wood working
 

On Apr 9, 8:22 am, "Dr. Deb" wrote:
wrote:
Help
I am new to wood working and the project I am making states to cut the
wood at a 1/8 inch off-set. How do I make this cut with a table saw?

Like Morris said, "More information please." If you are brand new to
woodworking you probably are unfamiliar with a lot of terms. Just describe
what you think the plans are calling for. In fact it would be real nice if
you could quote them.

Deb
Thanks for the help.
The step reads " Bottom-should be cut to an 1/8inch offset to allow
for the angled sides
Sides-Bottom edges of sides should be cut to an 1/8 inch offset to
allow for a flat bottom"

new to wood working
 

On Apr 8, 7:53 pm, "Morris Dovey" wrote:
wrote:

| I am new to wood working and the project I am making states to cut
| the wood at a 1/8 inch off-set. How do I make this cut with a table
| saw?

More information please. Can/would you describe what the finished cut
is supposed to look like?

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USAhttp://www.iedu.com/DeSoto/solar.html

Thanks for the help.
The step reads " Bottom-should be cut to an 1/8inch offset to allow
for the angled sides
Sides-Bottom edges of sides should be cut to an 1/8 inch offset to
allow for a flat bottom"